Endura

Lying Close Grip Barbell Triceps Extension Behind The Head Strength Standards Calculator

Under strict Lying Close Grip Barbell Triceps Extension Behind The Head strength standards, Novice starts around 0.10x bodyweight for men and 0.07x for women, while Elite starts around 0.34x for men and 0.25x for women.

Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Lying Close Grip Barbell Triceps Extension Behind The Head is Novice, Intermediate, Advanced, or Elite for your bodyweight.

The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Lying Close Grip Barbell Triceps Extension Behind The Head standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.

Understanding Your Behind-the-Head Triceps Extension Strength Score

Your Behind-the-Head Triceps Extension strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Behind-the-Head Triceps Extension, valid behind-the-head triceps extension reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.

This result is specific to behind-the-head triceps extension. A counted rep should meet this standard: Lower the bar behind the head under control by bending the elbows, then extend the elbows to return to the defined finish without pressing from the chest and finish in a valid position that shows controlled elbow extension with the upper arms consistent and no close-grip bench press, pullover swing, bounce, or shoulder heave. The score is not a general label for every nearby vertical push exercise, and it should not be used for Lying Barbell Triceps Extension to forehead, Close Grip Bench Press, JM Press, Barbell Pullover, Overhead Triceps Extension standing, Dumbbell Lying Triceps Extension, Cable Lying Triceps Extension, Partial lockout reps, Bounced behind-head reps. Those variations may be useful training choices, but they answer a different standards question.

For example, a 200 lb male with a 48 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 38 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.

The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.

Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.

Lying Close Grip Barbell Triceps Extension Behind The Head Strength Standards

The Lying Close Grip Barbell Triceps Extension Behind The Head tables show where an estimated 1RM falls from Beginner through Elite, plus the Stretch benchmark, at each listed bodyweight. The ranges use allometric scaling, so they rise with bodyweight without increasing pound-for-pound.

Choose the table for your sex, find the row nearest your bodyweight, and locate the range containing your estimated 1RM. Each boundary belongs to the higher level. The calculator uses your exact bodyweight and remains the final result for bodyweights between rows.

Men’s Lying Close Grip Barbell Triceps Extension Behind The Head Strength Standards

BodyweightBeginnerNoviceIntermediateAdvancedEliteStretch
120 lbUnder 14 lb14–22 lb23–33 lb34–47 lb48–62 lb63 lb+
130 lbUnder 15 lb15–23 lb24–35 lb36–49 lb50–66 lb67 lb+
140 lbUnder 16 lb16–24 lb25–37 lb38–52 lb53–69 lb70 lb+
150 lbUnder 16 lb16–25 lb26–38 lb39–55 lb56–72 lb73 lb+
160 lbUnder 17 lb17–27 lb28–40 lb41–57 lb58–76 lb77 lb+
170 lbUnder 18 lb18–28 lb29–42 lb43–59 lb60–79 lb80 lb+
180 lbUnder 18 lb18–29 lb30–43 lb44–62 lb63–82 lb83 lb+
190 lbUnder 19 lb19–30 lb31–45 lb46–64 lb65–85 lb86 lb+
200 lbUnder 20 lb20–31 lb32–47 lb48–66 lb67–88 lb89 lb+
210 lbUnder 20 lb20–32 lb33–48 lb49–68 lb69–91 lb92 lb+
220 lbUnder 21 lb21–33 lb34–50 lb51–71 lb72–94 lb95 lb+
230 lbUnder 22 lb22–34 lb35–51 lb52–73 lb74–97 lb98 lb+
240 lbUnder 22 lb22–35 lb36–53 lb54–75 lb76–99 lb100 lb+
250 lbUnder 23 lb23–36 lb37–54 lb55–77 lb78–102 lb103 lb+
260 lbUnder 23 lb23–37 lb38–56 lb57–79 lb80–105 lb106 lb+

Women’s Lying Close Grip Barbell Triceps Extension Behind The Head Strength Standards

BodyweightBeginnerNoviceIntermediateAdvancedEliteStretch
100 lbUnder 8 lb8–12 lb13–19 lb20–28 lb29–38 lb39 lb+
110 lbUnder 8 lb8–13 lb14–20 lb21–30 lb31–40 lb41 lb+
120 lbUnder 9 lb9–14 lb15–21 lb22–32 lb33–43 lb44 lb+
130 lbUnder 9 lb9–14 lb15–23 lb24–34 lb35–45 lb46 lb+
140 lbUnder 10 lb10–15 lb16–24 lb25–35 lb36–48 lb49 lb+
150 lbUnder 10 lb10–16 lb17–25 lb26–37 lb38–50 lb51 lb+
160 lbUnder 10 lb10–17 lb18–26 lb27–39 lb40–52 lb53 lb+
170 lbUnder 11 lb11–17 lb18–27 lb28–40 lb41–54 lb55 lb+
180 lbUnder 11 lb11–18 lb19–28 lb29–42 lb43–57 lb58 lb+
190 lbUnder 12 lb12–19 lb20–29 lb30–43 lb44–59 lb60 lb+
200 lbUnder 12 lb12–20 lb21–30 lb31–45 lb46–61 lb62 lb+
210 lbUnder 13 lb13–20 lb21–32 lb33–47 lb48–63 lb64 lb+
220 lbUnder 13 lb13–21 lb22–33 lb34–48 lb49–65 lb66 lb+

These are Endura’s practical Lying Close Grip Barbell Triceps Extension Behind The Head standards. They are built from exercise-specific reference thresholds and validated against the calculator’s exact lower-inclusive tier boundaries; they are not population averages.

How the Behind-the-Head Triceps Extension Calculator Works

The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.

Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 48 lb estimated 1RM, the ratio is near 0.240x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.

Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Behind-the-Head Triceps Extension and valid behind-the-head triceps extension reps that meet the accepted rule.

Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.

The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Behind-the-Head Triceps Extension question described here, using the same bodyweight-ratio logic as the rest of the standards system.

Elite Behind-the-Head Triceps Extension Strength Levels

Elite Lying Close Grip Barbell Triceps Extension Behind The Head strength means reaching the Elite target for your sex and exact bodyweight. The target rises with bodyweight without increasing pound-for-pound, so use the calculator for your exact Elite and Stretch targets.

At 200 lb bodyweight, Elite begins around 68 lb for men. At 150 lb bodyweight, Elite begins around 38 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Behind-the-Head Triceps Extension, valid behind-the-head triceps extension reps, and the accepted rep.

Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger behind-the-head triceps extension.

Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.

Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.

Behind-the-Head Triceps Extension Strength Compared to Other Lifts

Comparisons are useful because they explain why standards differ. Behind-the-Head Triceps Extension sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.

Related movementComparison purposeWhat the gap can reveal
Lying Barbell Triceps Extensionsclosest neighboring standardA higher behind-the-head triceps extension score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates.
Barbell Overhead Triceps Extensionsame family contrastIf the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here.
Swiss Bar Skull Crusherequipment contrastIf this score is far ahead, confirm the set did not drift into a disallowed variation.
Dumbbell Lying Triceps Extensionsrange and control comparisonThe comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different.
Cable Lying Triceps Extensionheavier strength ceilingA similar tier can suggest balanced development, but it still does not make the two entries interchangeable.
Close Grip Bench Presstechnique transfer checkUse the gap to choose training work instead of forcing one result to predict the other.

If a related lift is much stronger, look for the one constraint unique to behind-the-head triceps extension: range, support position, grip, bracing, or finish control. If behind-the-head triceps extension is much stronger, confirm that the set did not become one of the disallowed variations.

Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.

The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.

Milestones in Behind-the-Head Triceps Extension Strength

Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.

MilestoneExample targetWhy it mattersNext focus
First valid strict behind-the-head triceps extension rep3 to 5 clean reps at a repeatable training weightShows the lifter can follow the accepted rule before a max testKeep setup identical across sets
Novice boundaryMen near 20 lb; women near 10 lbCreates a first bodyweight-ratio benchmarkBuild range and control
Intermediate boundaryMen near 32 lb; women near 17 lbShows the lift is no longer just familiarAddress the main limiter
Advanced boundaryMen near 48 lb; women near 26 lbMarks strong relative performance for this exerciseUse smaller jumps and more video review
Elite boundaryMen near 68 lb; women near 38 lbShows high-level strength in the exact standardProtect strict rep quality
Stretch benchmarkMen near 90 lb; women near 51 lbRepresents an unusually strong score in this calculatorRetest sparingly and recover well
Five-rep practice targetUse a set that estimates near 32 lb for a 200 lb male or 17 lb for a 150 lb femaleBuilds a cleaner estimate before a heavier testKeep every rep visually identical
Ten percent improvement targetMove a 32 lb estimate toward 35 lb, or a 17 lb estimate toward 18 lbGives a concrete block goal without requiring a new tierRetest only when the same rule survives

Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Behind-the-Head Triceps Extension milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.

Related tools place Behind-the-Head Triceps Extension inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.

  • Lying Barbell Triceps Extensions is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Behind-the-Head Triceps Extension. Compare it after a clean behind-the-head triceps extension test to see whether this exact setup is the limiter.
  • Barbell Overhead Triceps Extension gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
  • Swiss Bar Skull Crusher is useful when the current score feels surprising. Check it only after the behind-the-head triceps extension reps are valid, then use the difference to choose assistance work.
  • Dumbbell Lying Triceps Extensions can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
  • Cable Lying Triceps Extension helps frame broader strength without replacing the Behind-the-Head Triceps Extension rep standard. If it is far ahead, audit the exact range and finish required here.

Use these tools after you have a valid behind-the-head triceps extension result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.

Use Calculator