Close Grip Bench Press Strength Standards Calculator
Under strict Barbell Close-Grip Bench Press (Raw) strength standards, Novice starts around 0.60x bodyweight for men and 0.34x for women, while Elite starts around 1.2x for men and 0.77x for women.
Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Barbell Close-Grip Bench Press (Raw) is Novice, Intermediate, Advanced, or Elite for your bodyweight.
The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Barbell Close-Grip Bench Press (Raw) standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.
Understanding Your Close-Grip Bench Press Strength Score
Your score is your estimated one-rep max on the close-grip bench press compared to your bodyweight, which places you into a strength level and shows how close you are to moving up.
The calculator takes a recent set, estimates your max, and compares that number to lifters your size. That comparison determines both your tier and how many more pounds you need to reach the next level.
On the close-grip bench, your hands are set inside shoulder width, your elbows stay tucked, and the bar lowers all the way to your chest before you press it to full lockout. That setup shifts more of the work to your triceps and reduces how much your chest can help. For most lifters, the lift is limited by how strong they are through the top half of the press.
You can see that difference in how two sets feel and where the rep slows down.
For example:
A lifter presses 205 for 5 reps, and every rep slows near the top before the elbows fully straighten
→ estimated max reflects a lockout weakness driven by triceps strength
Another lifter presses 205 for 5 reps, drives the bar off the chest fast, but the last rep stalls just before lockout and needs a grind to finish
→ similar estimated max, but clearly closer to their limit at the top
Both sets produce similar numbers, but they point to the same place—improving lockout strength is what will move the lift forward.
Your result also shows how close you are to the next level.
For example:
A 180 lb lifter with a 215 lb estimated max has just entered Advanced
Another 180 lb lifter with a 235 lb estimated max is still Advanced, but only a small jump away from Elite
That difference is the gap between needing 20–30 more pounds and needing only 5–10 pounds to move up. The calculator shows that number directly so you know exactly what to work toward.
How you perform each rep has a direct impact on this result.
A proper close-grip bench press rep looks like this:
- Bar touches your chest each rep
- Elbows stay tucked instead of flaring out
- You press the bar until your arms are fully straight
- Your upper back stays tight on the bench
If you shorten the range or don’t lock out fully, you’ll be able to use more weight, but it won’t match what you can repeat with proper form.
For example:
185 × 5 with the bar touching your chest and a strong lockout
→ produces a lower, accurate estimated max
195 × 5 with the bar stopping short and the elbows not fully straight at the top
→ produces a higher number, but not one you can repeat with full-range reps
Because the close-grip bench relies heavily on triceps strength, getting stronger through the top half of the press is what usually pushes you into the next tier. You’ll see that reflected in your result and in how much more weight you need to press to move up.
If you’ve hit a recent set where every rep touches your chest and finishes with a solid lockout, enter it into the calculator above and see how your pressing strength stacks up.
Close Grip Bench Press Strength Standards
The Close Grip Bench Press tables show where an estimated 1RM falls from Beginner through Elite, plus the Stretch benchmark, at each listed bodyweight. The ranges use allometric scaling, so they rise with bodyweight without increasing pound-for-pound.
Choose the table for your sex, find the row nearest your bodyweight, and locate the range containing your estimated 1RM. Each boundary belongs to the higher level. The calculator uses your exact bodyweight and remains the final result for bodyweights between rows.
Men’s Close Grip Bench Press Strength Standards
| Bodyweight | Beginner | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|---|
| 120 lb | Under 84 lb | 84–112 lb | 113–142 lb | 143–171 lb | 172–195 lb | 196 lb+ |
| 130 lb | Under 89 lb | 89–119 lb | 120–150 lb | 151–181 lb | 182–206 lb | 207 lb+ |
| 140 lb | Under 93 lb | 93–125 lb | 126–157 lb | 158–190 lb | 191–216 lb | 217 lb+ |
| 150 lb | Under 97 lb | 97–131 lb | 132–165 lb | 166–199 lb | 200–226 lb | 227 lb+ |
| 160 lb | Under 102 lb | 102–136 lb | 137–172 lb | 173–208 lb | 209–236 lb | 237 lb+ |
| 170 lb | Under 106 lb | 106–142 lb | 143–179 lb | 180–216 lb | 217–246 lb | 247 lb+ |
| 180 lb | Under 110 lb | 110–148 lb | 149–186 lb | 187–225 lb | 226–256 lb | 257 lb+ |
| 190 lb | Under 114 lb | 114–153 lb | 154–193 lb | 194–233 lb | 234–265 lb | 266 lb+ |
| 200 lb | Under 118 lb | 118–158 lb | 159–200 lb | 201–241 lb | 242–274 lb | 275 lb+ |
| 210 lb | Under 122 lb | 122–164 lb | 165–206 lb | 207–249 lb | 250–283 lb | 284 lb+ |
| 220 lb | Under 126 lb | 126–169 lb | 170–213 lb | 214–257 lb | 258–292 lb | 293 lb+ |
| 230 lb | Under 129 lb | 129–174 lb | 175–219 lb | 220–265 lb | 266–301 lb | 302 lb+ |
| 240 lb | Under 133 lb | 133–179 lb | 180–226 lb | 227–272 lb | 273–310 lb | 311 lb+ |
| 250 lb | Under 137 lb | 137–184 lb | 185–232 lb | 233–280 lb | 281–318 lb | 319 lb+ |
| 260 lb | Under 141 lb | 141–189 lb | 190–238 lb | 239–287 lb | 288–327 lb | 328 lb+ |
Women’s Close Grip Bench Press Strength Standards
| Bodyweight | Beginner | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|---|
| 100 lb | Under 39 lb | 39–53 lb | 54–68 lb | 69–88 lb | 89–102 lb | 103 lb+ |
| 110 lb | Under 41 lb | 41–57 lb | 58–73 lb | 74–93 lb | 94–109 lb | 110 lb+ |
| 120 lb | Under 44 lb | 44–60 lb | 61–77 lb | 78–99 lb | 100–115 lb | 116 lb+ |
| 130 lb | Under 46 lb | 46–64 lb | 65–82 lb | 83–104 lb | 105–122 lb | 123 lb+ |
| 140 lb | Under 49 lb | 49–67 lb | 68–86 lb | 87–110 lb | 111–128 lb | 129 lb+ |
| 150 lb | Under 51 lb | 51–70 lb | 71–90 lb | 91–115 lb | 116–134 lb | 135 lb+ |
| 160 lb | Under 53 lb | 53–73 lb | 74–94 lb | 95–120 lb | 121–140 lb | 141 lb+ |
| 170 lb | Under 55 lb | 55–76 lb | 77–98 lb | 99–125 lb | 126–146 lb | 147 lb+ |
| 180 lb | Under 58 lb | 58–79 lb | 80–102 lb | 103–130 lb | 131–151 lb | 152 lb+ |
| 190 lb | Under 60 lb | 60–82 lb | 83–106 lb | 107–135 lb | 136–157 lb | 158 lb+ |
| 200 lb | Under 62 lb | 62–85 lb | 86–109 lb | 110–140 lb | 141–163 lb | 164 lb+ |
| 210 lb | Under 64 lb | 64–88 lb | 89–113 lb | 114–144 lb | 145–168 lb | 169 lb+ |
| 220 lb | Under 66 lb | 66–91 lb | 92–116 lb | 117–149 lb | 150–173 lb | 174 lb+ |
These are Endura’s practical Close Grip Bench Press standards. They are built from exercise-specific reference thresholds and validated against the calculator’s exact lower-inclusive tier boundaries; they are not population averages.
How the Close-Grip Bench Press Calculator Works
The calculator takes a set you’ve already done and turns it into a number you can compare.
It uses three inputs:
- your bodyweight
- the weight you pressed
- the number of reps completed
From that, it estimates your one-rep max and compares it to your bodyweight to determine your strength level.
What Each Input Does
| Input | What It Does | Why It Matters |
|---|---|---|
| Bodyweight | Used to calculate your strength ratio | Shows how strong you are for your size |
| Weight Lifted | Forms the base of your estimated max | Heavier weight raises your calculated strength |
| Reps Completed | Adjusts your estimated max using the formula | More reps increase your estimated max if the reps are done cleanly |
Here’s how your result is calculated.
The Barbell Close-Grip Bench Press calculator estimates your one-rep max from the weight and reps you enter, then compares it with allometrically adjusted targets for your sex and exact bodyweight.
That’s your level.
Now compare that to a loose version.
A lifter presses 195 × 5 but the bar stops short of the chest and the elbows don’t fully lock
→ e1RM ≈ 228 lb
→ ratio looks higher
Run the same set with full range—bar to chest, elbows locked—and the number drops back closer to 215–220.
The calculator assumes every rep is done the same way:
- bar touches your chest
- elbows stay tucked
- arms fully straighten at the top
Change any of those and the result changes.
Bodyweight is what turns that number into a useful comparison.
A 160 lb lifter with a 215 lb estimated max
→ 215 ÷ 160 = 1.34 → Elite
A 220 lb lifter with the same number
→ 215 ÷ 220 = 0.98 → Intermediate
Same strength, different level.
This system works because it stays consistent.
You can take any clean set, run it through the calculator, and compare it to:
- your past workouts
- your current bodyweight
- your next target
That’s how you track real progress instead of guessing.
Use a recent set where every rep touches your chest and locks out cleanly, enter it into the calculator above, and use that result as your baseline moving forward.
Calculation and Standards Method
Where These Strength Standards Come From
| Source | Contribution | Limitation |
|---|---|---|
| Strength databases | Large volume of lifting data | Includes inconsistent rep quality |
| Coaching standards | Defines strict execution rules | Smaller datasets |
| Ratio models | Normalizes strength by bodyweight | Does not reflect individual variation |
| Real-world lifting | Shows how people actually lift | Includes inflated reps |
Elite Close-Grip Bench Press Strength Levels
Reaching Elite on the close-grip bench press means you can press heavy weight and finish every rep cleanly from chest to lockout.
If either one drops off—range or lockout—you’re not there yet.
Elite Close-Grip Bench Press Strength Levels
| Level | Men (Ratio) | Women (Ratio) |
|---|---|---|
| Elite | ≥ 1.23 × bodyweight | ≥ 0.77 × bodyweight |
| Stretch | 1.40 × bodyweight | 0.90 × bodyweight |
Here’s what that looks like in the gym.
A 180 lb lifter presses 225 × 5 with:
- the bar touching the chest
- elbows tucked
- full lockout on every rep
→ estimated max ≈ 262 lb
→ 262 ÷ 180 = 1.45 → beyond Elite
You can repeat that set with the same form—that’s elite.
Now compare that to a loose version.
A lifter presses 245 × 5 but:
- uses a wider grip
- shortens the range
- finishes with soft lockouts
→ the number looks higher
→ but when tested strictly, it drops back into Advanced
Heavy weight only counts if you can repeat it with full range.
Bodyweight still changes how elite strength is defined.
A 160 lb lifter with a 225 lb estimated max
→ 225 ÷ 160 = 1.40 → Elite
A 220 lb lifter with the same 225 lb estimated max
→ 225 ÷ 220 = 1.02 → Advanced
Same lift, different level.
Here’s where most people get it wrong.
You’ll see heavy close-grip numbers online, but:
- grip is wider
- reps are shorter
- lockout isn’t finished
When you bring the grip in, touch the chest, and lock out every rep, the number drops—but now it reflects real strength.
Elite close-grip strength is simple:
- heavy weight
- narrow grip
- full range
- repeatable reps
If you can’t repeat the lift with full range, it doesn’t count.
Take a recent clean set, enter it into the calculator above, and check if your ratio actually reaches the Elite threshold.
Close-Grip Bench Press vs Other Lifts
The close-grip bench press is not just a lighter bench press—it’s a different strength test.
As your grip narrows, your triceps take over and the lockout becomes the hardest part of the lift.
Close-Grip Bench Press vs Other Lifts (Relative Strength)
| Lift | Typical % of Bench Press | Main Limitation |
|---|---|---|
| Close-Grip Bench Press | 80–85% | Triceps / Lockout |
| Bench Press | 100% | Chest / Mid-range |
| Incline Bench Press | 70–80% | Upper chest / shoulders |
| Dips | Bodyweight-dependent, typically similar to close-grip pressing strength | Triceps + stability |
| Overhead Press | 50–65% | Shoulders / lockout |
Here’s how that shows up with real numbers.
A 180 lb lifter:
- Bench press → 225 × 5 → estimated max ≈ 262 lb
- Close-grip bench → 185 × 5 → estimated max ≈ 215 lb
215 ÷ 262 ≈ 82%
That falls right inside the expected range.
Now look at execution.
A lifter presses 205 × 5 on close-grip bench but:
- elbows flare
- the bar doesn’t reach the chest
- lockout is soft
→ the lift turns into a standard bench pattern
When the same lift is done correctly:
- elbows tucked
- bar touches the chest
- full lockout
→ the number drops into the correct range
That’s your real close-grip strength.
Bodyweight still affects how these lifts compare.
A 160 lb lifter pressing 185 × 5
→ estimated max ≈ 215 lb → Advanced
A 220 lb lifter pressing the same set
→ estimated max ≈ 215 lb → Intermediate
Same lift, different level.
Each lift exposes a different weakness:
- Close-grip bench → triceps and lockout strength
- Bench press → chest and mid-range power
- Incline bench → upper chest and shoulders
- Dips → triceps strength with bodyweight control
- Overhead press → shoulder strength and stability
If your close-grip bench is much lower than your bench press, your lockout is the problem.
Take a recent close-grip bench set, enter it into the calculator above, and compare it to your other lifts to see where your pressing strength is balanced—and where it isn’t.
Milestones in Close-Grip Bench Press Strength
A milestone on the close-grip bench press only counts if you hit it with a narrow grip, touch your chest, and lock out every rep.
If you change the grip, shorten the range, or skip lockout, the number does not reflect your actual strength.
Close-Grip Bench Press Milestones
| Milestone | What It Represents | Execution Requirement |
|---|---|---|
| 135 lb | Entering intermediate pressing strength | Chest contact + full lockout |
| 185 lb | Solid intermediate to early advanced | Elbows tucked, no soft lockout |
| 225 lb | Advanced to elite range | Clean reps from chest to lockout |
| 275 lb | Elite-level pressing strength | No breakdown under heavy load |
| 315 lb | High elite performance | Repeatable full-range reps |
Now interpret this correctly using your system.
A 180 lb lifter pressing 185 × 5 with:
- bar touching the chest
- elbows tucked
- full lockout
→ e1RM ≈ 215 lb
→ 215 ÷ 180 = 1.20 → Advanced (correct per 1.02–1.23 range)
That’s a real 185 milestone.
Now compare that to a misleading version.
A lifter presses 205 × 5 but:
- grip widens
- bar stops short
- lockout is incomplete
→ looks like a “225 milestone”
→ but when done correctly, it drops back near 185-level strength
That’s an ego milestone.
Bodyweight changes what each milestone means.
Your next Barbell Close-Grip Bench Press milestone is the first strength-level target above your current result for your sex and exact bodyweight. Use the calculator to see the precise estimated one-rep-max gap to that target.
A 220 lb lifter pressing the same set
→ 215 ÷ 220 = 0.98 → Intermediate (0.81–1.02)
Same milestone, different level.
Most lifters fail at the same point:
The bar moves off the chest, then slows as the elbows straighten.
That’s your lockout.
If you don’t fix that, you won’t hold the next milestone.
A real milestone means:
- bar touches the chest
- elbows stay tucked
- full lockout
- repeatable reps
If you can’t repeat it, you haven’t earned it.
Pick the next milestone you’re close to, fix your lockout, and retest with strict reps—then enter that set into the calculator above to see where it actually ranks.
Related Tools
Use these tools to compare Barbell Close-Grip Bench Press (Raw) with closely related movements, implements, and strength demands. Each calculator keeps its own movement and scoring rules.
| Related tool | Why it is related | How it differs |
|---|---|---|
| Barbell Incline Bench Press (Raw) | Compare Barbell Incline Bench Press (Raw) with Barbell Close-Grip Bench Press (Raw) as a closely related strength standard. | Barbell Incline Bench Press (Raw) uses its own movement, implement, and scoring rules. |
| Bodyweight Dip Strength Standards | Compare Bodyweight Dip Strength Standards with Barbell Close-Grip Bench Press (Raw) as a closely related strength standard. | Bodyweight Dip Strength Standards uses its own movement, implement, and scoring rules. |
| Bench Press 1RM Calculator | Compare Bench Press 1RM Calculator with Barbell Close-Grip Bench Press (Raw) as a closely related strength standard. | Bench Press 1RM Calculator uses its own movement, implement, and scoring rules. |
| Archer Push Up Strength Standards | Compare Archer Push Up Strength Standards with Barbell Close-Grip Bench Press (Raw) as a closely related strength standard. | Archer Push Up Strength Standards uses its own movement, implement, and scoring rules. |
| Barbell JM Press | Compare Barbell JM Press with Barbell Close-Grip Bench Press (Raw) as a closely related strength standard. | Barbell JM Press uses its own movement, implement, and scoring rules. |