EZ-Bar Close-Grip Bench Press Strength Standards Calculator
Under strict EZ-Bar Close-Grip Bench Press strength standards, Novice starts around 0.57x bodyweight for men and 0.32x for women, while Elite starts around 1.2x for men and 0.73x for women.
Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your EZ-Bar Close-Grip Bench Press is Novice, Intermediate, Advanced, or Elite for your bodyweight.
The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the EZ-Bar Close-Grip Bench Press standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.
Understanding Your EZ-Bar Close-Grip Bench Press Strength Score
Your EZ-Bar Close-Grip Bench Press strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict EZ-Bar Close-Grip Bench Press, valid EZ-Bar Close-Grip Bench Press reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.
This result is specific to EZ-Bar Close-Grip Bench Press. A counted rep should meet this standard: Use the recorded brand-neutral Olympic EZ-bar envelope (1.15–1.25 m, 27–29 mm grips, rotating 50 mm sleeves); record actual mass/dimensions/grip and score bar/plates/collars; On a flat 0.0° bench use mirrored inner segments at 28–32 cm hand-center spacing and 25–35° from full supination. Head, shoulders, and buttocks remain planted; feet flat. Legal leg drive is allowed without contact loss; Unrack to full extension; lower to lower sternum; hold motionless one full second without bounce or sink; press to simultaneous full elbow lockout. Same setup for 1–10 reps. Spotter may hand off/protect only; Belt, wrist wraps, chalk, and shoes allowed. Elbow sleeves, supportive shirt, blocks/boards, assistance, and bar/plate floor contact prohibited. The score is not a general label for every nearby horizontal press / close grip exercise, and it should not be used for Straight/other bar; outer/unequal grip; other bench angle; floor/JM/board/pin press; touch-and-go/bounce/sink; contact loss; partial/asymmetric lockout; unknown/excluded bar mass; assistance. Those variations may be useful training choices, but they answer a different standards question.
For example, a 200 lb male with a 194 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 110 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.
The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.
Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.
EZ-Bar Close-Grip Bench Press Strength Standards
EZ-Bar Close-Grip Bench Press standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.
The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the entered weight for strict EZ-Bar Close-Grip Bench Press, valid reps, and no substitutions from related lifts.
Men’s EZ-Bar Close-Grip Bench Press Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 120 lb | 68 lb | 92 lb | 116 lb | 140 lb+ | 160 lb |
| 130 lb | 74 lb | 100 lb | 126 lb | 152 lb+ | 173 lb |
| 140 lb | 80 lb | 108 lb | 136 lb | 164 lb+ | 186 lb |
| 150 lb | 85 lb | 115 lb | 145 lb | 175 lb+ | 200 lb |
| 160 lb | 91 lb | 123 lb | 155 lb | 187 lb+ | 213 lb |
| 170 lb | 97 lb | 131 lb | 165 lb | 199 lb+ | 226 lb |
| 180 lb | 103 lb | 139 lb | 174 lb | 210 lb+ | 239 lb |
| 190 lb | 108 lb | 146 lb | 184 lb | 222 lb+ | 253 lb |
| 200 lb | 114 lb | 154 lb | 194 lb | 234 lb+ | 266 lb |
| 210 lb | 120 lb | 162 lb | 203 lb | 245 lb+ | 279 lb |
| 220 lb | 125 lb | 169 lb | 213 lb | 257 lb+ | 293 lb |
| 230 lb | 131 lb | 177 lb | 223 lb | 269 lb+ | 306 lb |
| 240 lb | 137 lb | 185 lb | 233 lb | 280 lb+ | 319 lb |
| 250 lb | 143 lb | 192 lb | 242 lb | 292 lb+ | 333 lb |
| 260 lb | 148 lb | 200 lb | 252 lb | 304 lb+ | 346 lb |
Women’s EZ-Bar Close-Grip Bench Press Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 100 lb | 32 lb | 45 lb | 57 lb | 73 lb+ | 86 lb |
| 110 lb | 36 lb | 49 lb | 63 lb | 80 lb+ | 94 lb |
| 120 lb | 39 lb | 54 lb | 68 lb | 88 lb+ | 103 lb |
| 130 lb | 42 lb | 58 lb | 74 lb | 95 lb+ | 111 lb |
| 140 lb | 45 lb | 63 lb | 80 lb | 102 lb+ | 120 lb |
| 150 lb | 48 lb | 67 lb | 85 lb | 110 lb+ | 128 lb |
| 160 lb | 52 lb | 71 lb | 91 lb | 117 lb+ | 137 lb |
| 170 lb | 55 lb | 76 lb | 97 lb | 124 lb+ | 145 lb |
| 180 lb | 58 lb | 80 lb | 103 lb | 132 lb+ | 154 lb |
| 190 lb | 61 lb | 85 lb | 108 lb | 139 lb+ | 162 lb |
| 200 lb | 65 lb | 89 lb | 114 lb | 146 lb+ | 171 lb |
| 210 lb | 68 lb | 94 lb | 120 lb | 154 lb+ | 180 lb |
| 220 lb | 71 lb | 98 lb | 125 lb | 161 lb+ | 188 lb |
Men: Beginner is below 0.570x, Novice begins at 0.570x, Intermediate begins at 0.769x, Advanced begins at 0.969x, Elite begins at 1.169x, and Stretch is 1.330x bodyweight. Women: Beginner is below 0.323x, Novice begins at 0.323x, Intermediate begins at 0.447x, Advanced begins at 0.570x, Elite begins at 0.732x, and Stretch is 0.855x bodyweight.
At 200 lb bodyweight, a male lifter needs about 194 lb for Advanced and 234 lb for Elite. At 150 lb bodyweight, a female lifter needs about 85 lb for Advanced and 110 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.
How the EZ-Bar Close-Grip Bench Press Calculator Works
The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.
Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 194 lb estimated 1RM, the ratio is near 0.969x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.
Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict EZ-Bar Close-Grip Bench Press and valid EZ-Bar Close-Grip Bench Press reps that meet the accepted rule.
Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.
The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific EZ-Bar Close-Grip Bench Press question described here, using the same bodyweight-ratio logic as the rest of the standards system.
Elite EZ-Bar Close-Grip Bench Press Strength Levels
Elite EZ-Bar Close-Grip Bench Press strength starts at 1.169x bodyweight for men and 0.732x bodyweight for women. Stretch benchmarks are 1.330x for men and 0.855x for women, marking unusually strong results inside this standards system.
At 200 lb bodyweight, Elite begins around 234 lb for men. At 150 lb bodyweight, Elite begins around 110 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict EZ-Bar Close-Grip Bench Press, valid EZ-Bar Close-Grip Bench Press reps, and the accepted rep.
Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger EZ-Bar Close-Grip Bench Press.
Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.
Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.
EZ-Bar Close-Grip Bench Press Strength Compared to Other Lifts
Comparisons are useful because they explain why standards differ. EZ-Bar Close-Grip Bench Press sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.
| Related movement | Comparison purpose | What the gap can reveal |
|---|---|---|
| Bench Press | closest neighboring standard | A higher EZ-Bar Close-Grip Bench Press score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates. |
| Close-Grip Bench Press | same family contrast | If the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here. |
| Incline Bench Press | equipment contrast | If this score is far ahead, confirm the set did not drift into a disallowed variation. |
| Wide-Grip Bench Press | range and control comparison | The comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different. |
| Paused Bench Press | heavier strength ceiling | A similar tier can suggest balanced development, but it still does not make the two entries interchangeable. |
| Spoto Press | technique transfer check | Use the gap to choose training work instead of forcing one result to predict the other. |
If a related lift is much stronger, look for the one constraint unique to EZ-Bar Close-Grip Bench Press: range, support position, grip, bracing, or finish control. If EZ-Bar Close-Grip Bench Press is much stronger, confirm that the set did not become one of the disallowed variations.
Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.
The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.
Milestones in EZ-Bar Close-Grip Bench Press Strength
Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.
| Milestone | Example target | Why it matters | Next focus |
|---|---|---|---|
| First valid strict ez-bar close-grip bench press rep | 3 to 5 clean reps at a repeatable training weight | Shows the lifter can follow the accepted rule before a max test | Keep setup identical across sets |
| Novice boundary | Men near 114 lb; women near 48 lb | Creates a first bodyweight-ratio benchmark | Build range and control |
| Intermediate boundary | Men near 154 lb; women near 67 lb | Shows the lift is no longer just familiar | Address the main limiter |
| Advanced boundary | Men near 194 lb; women near 85 lb | Marks strong relative performance for this exercise | Use smaller jumps and more video review |
| Elite boundary | Men near 234 lb; women near 110 lb | Shows high-level strength in the exact standard | Protect strict rep quality |
| Stretch benchmark | Men near 266 lb; women near 128 lb | Represents an unusually strong score in this calculator | Retest sparingly and recover well |
| Five-rep practice target | Use a set that estimates near 154 lb for a 200 lb male or 67 lb for a 150 lb female | Builds a cleaner estimate before a heavier test | Keep every rep visually identical |
| Ten percent improvement target | Move a 154 lb estimate toward 169 lb, or a 67 lb estimate toward 74 lb | Gives a concrete block goal without requiring a new tier | Retest only when the same rule survives |
Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced EZ-Bar Close-Grip Bench Press milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.
Related Strength Standards Tools
Related tools place EZ-Bar Close-Grip Bench Press inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.
- Bench Press is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from EZ-Bar Close-Grip Bench Press. Compare it after a clean EZ-Bar Close-Grip Bench Press test to see whether this exact setup is the limiter.
- Close-Grip Bench Press gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
- Incline Bench Press is useful when the current score feels surprising. Check it only after the EZ-Bar Close-Grip Bench Press reps are valid, then use the difference to choose assistance work.
- Wide-Grip Bench Press can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
- Paused Bench Press helps frame broader strength without replacing the EZ-Bar Close-Grip Bench Press standard. If it is far ahead, audit the exact range and finish required here.
Use these tools after you have a valid EZ-Bar Close-Grip Bench Press result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.