Endura

Bent Over Two Dumbbell Row Strength Standards Calculator

Compare your Bent Over Two Dumbbell Row strength with Endura's strength standards for men and women at your bodyweight. A useful benchmark for a good one-rep max is our Intermediate standard: approximately 129 lb at 190 lb for a man and 80 lb at 150 lb for a woman.

How does your best lift compare? Enter your bodyweight, the combined weight of both dumbbells, and the reps you completed below. The calculator estimates your one-rep max and shows your strength level for your bodyweight. Count 1–5 whole repetitions with both sides moving together through the same controlled range.

The calculator compares that estimated one-rep max with the Bent Over Two Dumbbell Row standards for your sex at your bodyweight. Use the result to compare sets performed with the same equipment and movement rules. The benchmark is a comparison target, not a working-set prescription.

What Is a Good Weight for Bent Over Two Dumbbell Row?

A useful Endura benchmark for Bent Over Two Dumbbell Row is the Intermediate level. At the reference bodyweights used by this model, Intermediate begins around 129 lb for a 190 lb man and 80 lb for a 150 lb woman. These are estimated one-rep-max comparison targets, not universal starting weights or measured population averages.

Enter the combined weight of both dumbbells. Keep the same convention when comparing sets. Count 1–5 whole repetitions with both sides moving together through the same controlled range. Enter your bodyweight, exact exercise weight, and valid reps to see how your set compares with the bodyweight-adjusted standards and the next target.

Your Bent Over Two Dumbbell Row result compares your estimated one-rep max with strength targets adjusted for your sex and exact bodyweight. The result is still specific to Bent Over Two Dumbbell Row; it should not be treated as a rating for a nearby exercise.

A heavier lifter receives higher target weights, but those targets do not rise pound-for-pound with bodyweight. This is why the calculator uses your exact bodyweight instead of assigning every lifter’s tier from one fixed bodyweight ratio.

Bent Over Two Dumbbell Row Strength Standards

Use the men’s or women’s table and find the row closest to your bodyweight for a quick reference. For an exact result, enter your bodyweight, weight lifted, and reps into the calculator. It will estimate your one-rep max, identify your strength level, and show the next target to pursue.

Enter the combined weight of both dumbbells. Count 1–5 whole repetitions with both sides moving together through the same controlled range. Stand with one matched dumbbell in each hand, brace the trunk, and hinge to the same unsupported torso position before every rep. Pull both dumbbells simultaneously toward the lower ribs or upper abdomen with palms facing the thighs, then lower until the elbows are extended and shoulders are controlled. Return to the same hinge without torso rise, leg drive, rotation, bounce, or swing.

Endura built these standards from reviewed Bent Over Two Dumbbell Row targets and adjusts them for different bodyweights. They are practical benchmarks for this exact test—not population averages.

Men

BodyweightNoviceIntermediateAdvancedEliteStretch
120 lb67 lb95 lb129 lb162 lb+188 lb+
130 lb71 lb100 lb136 lb171 lb+198 lb+
140 lb74 lb105 lb143 lb179 lb+208 lb+
150 lb78 lb110 lb149 lb188 lb+218 lb+
160 lb81 lb115 lb156 lb196 lb+227 lb+
170 lb84 lb120 lb162 lb204 lb+237 lb+
180 lb88 lb124 lb169 lb212 lb+246 lb+
190 lb91 lb129 lb175 lb220 lb+255 lb+
200 lb94 lb133 lb181 lb228 lb+264 lb+
210 lb97 lb138 lb187 lb235 lb+273 lb+
220 lb100 lb142 lb193 lb243 lb+281 lb+
230 lb103 lb147 lb199 lb250 lb+290 lb+
240 lb106 lb151 lb204 lb257 lb+298 lb+
250 lb109 lb155 lb210 lb264 lb+306 lb+
260 lb112 lb159 lb216 lb271 lb+314 lb+

Women

BodyweightNoviceIntermediateAdvancedEliteStretch
100 lb41 lb61 lb82 lb103 lb+121 lb+
110 lb44 lb65 lb87 lb110 lb+128 lb+
120 lb47 lb69 lb92 lb116 lb+136 lb+
130 lb49 lb73 lb97 lb123 lb+144 lb+
140 lb52 lb76 lb102 lb129 lb+151 lb+
150 lb54 lb80 lb107 lb135 lb+158 lb+
160 lb56 lb84 lb112 lb141 lb+165 lb+
170 lb59 lb87 lb116 lb147 lb+172 lb+
180 lb61 lb90 lb121 lb152 lb+178 lb+
190 lb63 lb94 lb125 lb158 lb+185 lb+
200 lb65 lb97 lb130 lb164 lb+191 lb+
210 lb68 lb100 lb134 lb169 lb+198 lb+
220 lb70 lb103 lb138 lb174 lb+204 lb+

How the Bent Over Two Dumbbell Row Calculator Works

Enter your sex, bodyweight, weight lifted, and reps. The calculator estimates your one-rep max from the set, then compares that estimate with the Bent Over Two Dumbbell Row targets for your exact bodyweight. A one-rep entry uses the entered weight directly.

The bodyweight adjustment starts with reviewed targets for a 190 lb man and a 150 lb woman. For example, the men’s Advanced target is 149 lb at 150 lb bodyweight, 175 lb at 190 lb, and 199 lb at 230 lb. That is why the calculator needs your exact bodyweight instead of using one fixed bodyweight ratio for everyone.

Elite Bent Over Two Dumbbell Row Strength Levels

Elite Bent Over Two Dumbbell Row strength means reaching the Elite target for your sex and exact bodyweight while following the calculator’s accepted testing rules. The target increases as bodyweight increases, but not pound-for-pound, so use the calculator for your exact Elite and Stretch targets.

Bent Over Two Dumbbell Row Elite and Stretch Reference Targets
SexBodyweightElite beginsStretch begins
Men150 lb188 lb218 lb
Men190 lb220 lb255 lb
Men230 lb250 lb290 lb
Women120 lb116 lb136 lb
Women150 lb135 lb158 lb
Women180 lb152 lb178 lb

Bent Over Two Dumbbell Row Strength Compared to Other Lifts

Use these comparisons to see how your Bent Over Two Dumbbell Row strength carries over when the implement, starting position, or finish changes. Test each movement under its own rules so every result reflects the exercise you actually performed.

Compare the strength levels each calculator gives you instead of assuming the same weight means the same thing in different exercises. A meaningful gap can point you toward the part of the movement worth working on next.

Bent Over Two Dumbbell Row Exercise Comparisons
Compare withWhat the comparison can showHow the test differs
Lat PulldownCompare your lat pulldown set with Endura’s targets. Keep the same machine, attachment, grip, and range when tracking progress.Uses the Lat Pulldown exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Seated Cable RowCheck a seated cable row on your usual station. Use the same handle and setup so your result gives you a useful target for future sessions.Uses the Seated Cable Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Chest Supported RowCheck your rowing strength with your chest supported. Match the calculator’s equipment and weight instructions, then use the same bench setup when retesting.Uses the Chest Supported Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
One Arm Dumbbell RowCheck the strength of a row performed with one dumbbell. Use the same arm, support, and range of motion when comparing sessions.Uses the One Arm Dumbbell Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Bent Over RowCheck a bent-over barbell row set. Use the same grip and torso position when comparing your estimated maximum and strength targets.Uses the Bent Over Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.

Milestones in Bent Over Two Dumbbell Row Strength

Enter the combined weight of both dumbbells. Count 1–5 whole repetitions with both sides moving together through the same controlled range. Stand with one matched dumbbell in each hand, brace the trunk, and hinge to the same unsupported torso position before every rep. Pull both dumbbells simultaneously toward the lower ribs or upper abdomen with palms facing the thighs, then lower until the elbows are extended and shoulders are controlled. Return to the same hinge without torso rise, leg drive, rotation, bounce, or swing.

Enter the combined weight of both dumbbells. Count 1–5 whole repetitions with both sides moving together through the same controlled range. Stand with one matched dumbbell in each hand, brace the trunk, and hinge to the same unsupported torso position before every rep. Pull both dumbbells simultaneously toward the lower ribs or upper abdomen with palms facing the thighs, then lower until the elbows are extended and shoulders are controlled. Return to the same hinge without torso rise, leg drive, rotation, bounce, or swing.

Bent Over Two Dumbbell Row Reference Milestone Jumps
GroupReference bodyweightNovice to IntermediateIntermediate to AdvancedAdvanced to EliteElite to Stretch
Men190 lb+38 lb+46 lb+45 lb+35 lb
Women150 lb+26 lb+27 lb+28 lb+23 lb

Use these related calculators for context, not as substitutes for the Bent Over Two Dumbbell Row result. Each movement has its own execution rules and strength standards.

  • Lat Pulldown — Compare your lat pulldown set with Endura’s targets. Keep the same machine, attachment, grip, and range when tracking progress.
  • Seated Cable Row — Check a seated cable row on your usual station. Use the same handle and setup so your result gives you a useful target for future sessions.
  • Chest Supported Row — Check your rowing strength with your chest supported. Match the calculator’s equipment and weight instructions, then use the same bench setup when retesting.
  • One Arm Dumbbell Row — Check the strength of a row performed with one dumbbell. Use the same arm, support, and range of motion when comparing sessions.
  • Bent Over Row — Check a bent-over barbell row set. Use the same grip and torso position when comparing your estimated maximum and strength targets.
Bent Over Two Dumbbell Row Exercise Comparisons
Compare withWhat the comparison can showHow the test differs
Lat PulldownCompare your lat pulldown set with Endura’s targets. Keep the same machine, attachment, grip, and range when tracking progress.Uses the Lat Pulldown exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Seated Cable RowCheck a seated cable row on your usual station. Use the same handle and setup so your result gives you a useful target for future sessions.Uses the Seated Cable Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Chest Supported RowCheck your rowing strength with your chest supported. Match the calculator’s equipment and weight instructions, then use the same bench setup when retesting.Uses the Chest Supported Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
One Arm Dumbbell RowCheck the strength of a row performed with one dumbbell. Use the same arm, support, and range of motion when comparing sessions.Uses the One Arm Dumbbell Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Bent Over RowCheck a bent-over barbell row set. Use the same grip and torso position when comparing your estimated maximum and strength targets.Uses the Bent Over Row exercise and its own equipment, range, and weight instructions. Track that result separately from Bent Over Two Dumbbell Row.
Use Calculator