Barbell Side Lunge vs Single Leg Glute Bridge Hold
Compare your barbell side lunge and single leg glute bridge hold against strength standards for your sex, age range, and bodyweight. Enter one result for each exercise to see your strength levels, next targets, and priority.
First exercise: Weight used and a whole number from 1 to 12 reps. Second exercise: Single Leg Glute Bridge Hold hold time (seconds). Use the units shown. For the first exercise, reps are performed evenly on both sides; weaker side determines valid load and rep count. For the second exercise, stop the timer when the hold no longer matches this test: single-leg glute bridge repetitions, two-leg bridge holds, hip thrusts, feet-elevated bridges. Each exercise keeps its own measurement type; repetitions, seconds, and weights are never converted into one another. Age range changes only an exercise whose standards use age.
Barbell Side Lunge vs Single Leg Glute Bridge Hold Strength Standards
The men’s and women’s tables show the exact Novice-through-Elite targets for both exercises. Weight-based targets use bodyweight and display actual pounds and kilograms. Repetition and time standards keep their exercise-specific units and use age only when the individual exercise standards require it.
Age and bodyweight are never combined as row dimensions. Internal bodyweight-ratio scores are never displayed. When the exercises use unlike measurements, the table presents an explicit reference crosswalk instead of inventing a conversion.
Men’s Barbell Side Lunge vs Single Leg Glute Bridge Hold Standards
Reference crosswalk: Unlike measurements are not subtracted or converted. Each column states its own reference and preserves the exercise’s real unit.
| Strength level | Barbell Side Lunge at 120 lb bodyweight | Single Leg Glute Bridge Hold, Under 30 |
|---|---|---|
| Novice | 36 lb16.3 kg | 20 sec |
| Intermediate | 53 lb24 kg | 45 sec |
| Advanced | 76 lb34.5 kg | 80 sec |
| Elite | 104 lb47.2 kg | 125 sec |
Women’s Barbell Side Lunge vs Single Leg Glute Bridge Hold Standards
Reference crosswalk: Unlike measurements are not subtracted or converted. Each column states its own reference and preserves the exercise’s real unit.
| Strength level | Barbell Side Lunge at 100 lb bodyweight | Single Leg Glute Bridge Hold, Under 30 |
|---|---|---|
| Novice | 22 lb10 kg | 20 sec |
| Intermediate | 34 lb15.4 kg | 50 sec |
| Advanced | 48 lb21.8 kg | 90 sec |
| Elite | 66 lb29.9 kg | 140 sec |
How Your Barbell Side Lunge vs Single Leg Glute Bridge Hold Result Is Calculated
The two exercises can use different measurements. The calculator rates each result against the standards for that exercise first, then compares the resulting strength levels and progress toward the next level. It never invents a conversion between repetitions, seconds, and weight.
1. Estimate the weight-based result
For Barbell Side Lunge, one rep uses the weight entered. For 2–12 reps, the calculator runs both estimates and keeps the lower result.
- Epley: weight × (1 + reps ÷ 30)
- Brzycki: weight × 36 ÷ (37 − reps)
For a useful Barbell Side Lunge vs Single Leg Glute Bridge Hold comparison, use clean, recent sets performed with consistent technique and range of motion. Lower-rep sets usually require less extrapolation.
2. Rate the Barbell Side Lunge result
The standards use the sex-specific thresholds from the individual Barbell Side Lunge tool. The target adjusts to bodyweight using reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.
3. Rate the Single Leg Glute Bridge Hold result
The exercise-specific tool supplies sex-, bodyweight-band-, and age-specific time thresholds plus a stretch target. The calculator uses weaker_side_seconds and keeps hold time in seconds.
4. Compare strength level and progress
The lower strength level is the priority. When both exercises reach the same level, a priority appears only when one is at least 10 points farther from its next target. Otherwise, the result is Balanced. Age range changes only the exercise whose standards include age; it remains an analytics field for the other exercise.
| Stage | What happens |
|---|---|
| Rate the barbell side lunge | Use the exercise-specific estimated max and adjust targets to exact bodyweight with the two-thirds scaling rule. Measurement: estimated one-rep max. |
| Rate the single leg glute bridge hold hold | Compare strict hold seconds with the applicable exercise-specific thresholds without converting time into weight. Measurement: estimated one-rep max. |
| Compare levels | Use each exercise’s own level and next target; do not compare or divide results that use different measurements. |
How Men’s Barbell Side Lunge and Single Leg Glute Bridge Hold Standards Differ
What the men’s standards show:
Elite weight targets from 120 to 300 lb bodyweight.
Elite direct-performance targets from the youngest to oldest listed age range at 120 lb bodyweight.
Raw repetitions, seconds, and weights are not divided or converted. The calculator compares each exercise’s strength tier and progress within that tier.
The line chart below preserves each exercise’s real standards measurement in its own panel. Repetitions, seconds, and weights are never converted into one another.
Line chart loading. The standards tables above contain the exact values.
How Women’s Barbell Side Lunge and Single Leg Glute Bridge Hold Standards Differ
What the women’s standards show:
Elite weight targets from 100 to 240 lb bodyweight.
Elite direct-performance targets from the youngest to oldest listed age range at 100 lb bodyweight.
Raw repetitions, seconds, and weights are not divided or converted. The calculator compares each exercise’s strength tier and progress within that tier.
The line chart below preserves each exercise’s real standards measurement in its own panel. Repetitions, seconds, and weights are never converted into one another.
Line chart loading. The standards tables above contain the exact values.
Barbell Side Lunge and Single Leg Glute Bridge Hold Exercises Used by This Calculator
For a useful comparison, perform a strict barbell side lunge and a strict single leg glute bridge hold using the setup and load rules below. Use strict, repeatable Barbell Side Lunge and Single Leg Glute Bridge Hold tests that follow each exercise’s setup, range of motion, equipment, and load rules. Do not mix variations, assistance, partial range, momentum, or different load conventions.
Use the exercise-specific Barbell Side Lunge setup and load convention
Barbell is positioned on the upper back; high-bar or low-bar placement is allowed. Lifter begins standing upright with feet hip-width apart. Lifter steps laterally into a wide stance. Working foot remains flat and planted throughout the rep. Lifter descends by sitting into the working hip. Non-working leg remains extended with minimal knee bend. Working thigh reaches at least parallel, with hip crease at or below knee level. Each repetition counts only after returning to a fully upright standing position with hips and knees extended and feet returned under the body. Torso remains neutral with minimal forward collapse or rotation. Each rep is controlled with consistent depth, step width, and tempo. Reps are performed evenly on both sides; weaker side determines valid load and rep count. Raw lifting only; no equipped or assisted support is included. No shallow side steps without clear depth, forward or rotational lunge substitutions, excessive torso lean, momentum-assisted returns, assisted variations, machine-based lateral lunges, Smith machine variations, partial reps, uneven step widths, or equipped lifting are included. Load input represents total barbell weight only, not bodyweight. Standards reflect unilateral lower-body strength with significant lateral stability demands. Side lunges typically allow less loading than forward or reverse lunges due to reduced mechanical efficiency. Most lifters are limited by hip mobility, adductor strength, and lateral balance. Shallow depth or shortened step width will inflate results. Strict, repeatable execution is required for valid comparisons. Estimated 1RM is calculated from the entered weight used and reps.
Use the exercise-specific Single Leg Glute Bridge Hold setup and load convention
lie supine with one working foot planted, keep the non-working leg off the floor, lift into a controlled bridge top, keep the pelvis level, arms passive, and hold without hand pushing, foot taps, external support, or added weight. Stop the timer when the hold no longer matches this test: single-leg glute bridge repetitions, two-leg bridge holds, hip thrusts, feet-elevated bridges, or any shortcut that changes the score. Do not enter single-leg glute bridge repetitions, two-leg bridge holds, hip thrusts, feet-elevated bridges, weighted bridge holds. Do not combine multiple attempts into one time. Use the same setup and timing convention for retests.
Enter one recent Barbell Side Lunge result and one recent Single Leg Glute Bridge Hold result
First exercise: Weight used and a whole number from 1 to 12 reps. Second exercise: Single Leg Glute Bridge Hold hold time (seconds). Use the units shown.
Related Tools
- Barbell Side Lunge — View the individual Barbell Side Lunge standards and next strength-level target.
- Single Leg Glute Bridge Hold Strength Standards — View the individual Single Leg Glute Bridge Hold standards and next strength-level target.
- Barbell Cossack Squat — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
- Barbell Lunge — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
- Bodyweight Squat Strength Standards — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
- Step Up Strength Standards — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.