Single Leg Glute Bridge Hold Strength Standards Calculator

Understanding Your Single Leg Glute Bridge Hold Strength Score

Your Single Leg Glute Bridge Hold score is weaker-side hold time from one continuous valid hold. It is not multiple attempts added together, not a different variation renamed after the fact, and not time kept after the position no longer matches the test.

Every counted second must match this standard: lie supine with one working foot planted, keep the non-working leg off the floor, lift into a controlled bridge top, keep the pelvis level, arms passive, and hold without hand pushing, foot taps, external support, or added weight. The calculator treats the final valid second as the score, so a hold that breaks at 35 sec should be entered as 35 seconds even if the timer kept running longer.

This stricter number is more useful because Single Leg Glute Bridge Hold can be inflated by changing leverage, using support, or relaxing the stop rule. A shorter valid hold gives a better standards result than a longer timer number from a different exercise.

Single Leg Glute Bridge Hold Strength Standards

The public standards tables below are age/sex-first reference tables. Choose your sex and age range first, then compare your strict hold time with the level columns.

For example, a man age 20-29 reaches Novice at 20 sec, Intermediate at 40 sec, Advanced at 1:10, and Elite at 1:50. A woman age 20-29 reaches Novice at 20 sec, Intermediate at 45 sec, Advanced at 1:20, and Elite at 2:05. Beginner means the result is below the Novice line for that age group.

Men – Single Leg Glute Bridge Hold Standards Reference

Women – Single Leg Glute Bridge Hold Standards Reference

Use the calculator when you want the page to do the lookup for you. The tables are useful for scanning the main standards, while the calculator gives a direct level, current range, and next hold-time target from the exact seconds you enter.

What Is a Good Single Leg Glute Bridge Hold Score?

A good Single Leg Glute Bridge Hold score usually starts at Intermediate when every second is valid. In the public tables, Intermediate starts at 40 sec for men age 20-29, 35 sec for men age 40-49, 45 sec for women age 20-29, and 40 sec for women age 40-49.

Good does not mean the timer ran a long time while the position drifted. It means the same setup, leverage, and stop rule stayed visible after fatigue arrived. If the hold turns into a shortcut, the valid score stopped earlier.

If you are near a boundary, a few seconds can matter. A man age 20-29 who enters 35 seconds remains below Intermediate, while 40 seconds reaches Intermediate. Film a serious test from an angle that shows the position before entering the score.

Test Your Single Leg Glute Bridge Hold Strength

Test Single Leg Glute Bridge Hold with one continuous hold after a normal warm-up. The test standard is simple: lie supine with one working foot planted, keep the non-working leg off the floor, lift into a controlled bridge top, keep the pelvis level, arms passive, and hold without hand pushing, foot taps, external support, or added weight. Start the clock only once the hold is fully set.

• Enter weaker-side hold time from one attempt.
• Use the same setup for the whole test.
• Start timing only after the approved position is established.
• Stop timing at the first clear break in position.
• Enter total seconds, so 40 sec is entered as 40.

Stop the score at the first second that no longer matches the test. If the hold is valid through 40 sec and then loses position, enter 40.

What Counts and What Does Not Count

Count only weaker-side strict single-leg glute bridge hold seconds from one continuous valid attempt. A usable score comes from the same setup, same body position, and same stop rule from the first second to the last counted second.

When a hold is borderline, use the earlier time. A lower strict score is more useful than a bigger number built from support, changed leverage, or another movement. The number you enter should be the last second that still looked like the Single Leg Glute Bridge Hold test you started.

How the Single Leg Glute Bridge Hold Calculator Works

The calculator starts with the hold time you enter, then compares it with the standards for the form fields you selected. For this Single Leg Glute Bridge Hold tool, the selected exercise is weaker-side strict single-leg glute bridge hold seconds. More seconds means a stronger result, but only when the timer still matches the exercise-specific floor, hip, knee, shoulder, grip, or support rule for Single Leg Glute Bridge Hold.

The useful number is the hold time that matches the approved test. The calculator turns that number into a level, range, and next target, so you do not have to scan the table, convert times in your head, and do boundary math yourself. A man age 20-29 who enters 40 seconds lands at Intermediate; the next major target is 1:10 for Advanced.

The calculator does not judge the attempt for you. It assumes the number you enter came from valid Single Leg Glute Bridge Hold. If the position broke before the timer stopped, enter the earlier valid time.

How to Read Your Single Leg Glute Bridge Hold Results

After you enter your time, the result screen shows where that hold lands for the selected sex and age range. The main label is your standards level, such as Beginner, Novice, Intermediate, Advanced, or Elite. The supporting line repeats the exercise and score context, so check that the inputs match the test you actually performed.

The result also tells you where you sit inside the level and what target comes next. For example, a woman age 20-29 who enters 45 seconds lands at Intermediate, in the 45 sec-1:19 range. Because 1:20 starts Advanced for that group, the result screen can point to 35 sec more valid seconds as the next clear target.

If the result looks wrong, check the inputs before retesting. A wrong age range, wrong sex selection, wrong unit, or accidental entry of several attempts can move the result. Then check the hold standard. A time that looked strong but changed position should be entered as the last valid second.

Elite Single Leg Glute Bridge Hold Strength Levels

Elite Single Leg Glute Bridge Hold scores are long holds that stay valid when the position is hardest to keep. In the public tables, Elite begins at 1:50 for men age 20-29, 1:35 for men age 40-49, 2:05 for women age 20-29, and 1:45 for women age 40-49.

Elite is not just reaching a big timer number. It means the same Single Leg Glute Bridge Hold standard still holds near the end of the attempt. If the last seconds are mostly shortcuts, the valid score stopped earlier.

Related Tools

Bodyweight Squat Strength Standards

Bodyweight Squat is useful beside this hold because it gives a bodyweight lower-body movement standard near the same capacity family. It differs from this page because Bodyweight Squat uses a standing knee-and-hip pattern instead of a floor bridge. Use it next when you want to compare floor hip-extension endurance with a two-leg squat benchmark while keeping today’s score tied to one timed bridge-hold attempt.

Step Up Strength Standards

Step Up answers a different support-strength question through its single-leg lower-body control benchmark. It is not the same test, since Step Up uses a box ascent and balance demand rather than floor hip extension. Choose it next if you want to check whether bridge-side control carries over to standing hip drive, especially when the hold result looks limited by strength rather than position control.

Machine Back Extension Strength Standards

Machine Back Extension belongs beside this calculator because it is a published posterior-chain extension standard, not because the scores convert directly. The difference matters: Machine Back Extension uses a selectorized machine and external resistance instead of bodyweight floor repetitions. Check it next to compare floor glute control with a machine-supported back-extension score and compare the two results as separate standards.

Cable Pull Through Strength Standards

Cable Pull Through gives another view of hip-extension capacity when you want a resisted benchmark after floor bridge testing. Unlike this timed hold, Cable Pull Through uses cable resistance and a standing hinge setup. Go there next to compare bodyweight bridge endurance with a cable hinge standard, then use the contrast to decide whether endurance, hip drive, or bracing is the limiting quality.

Single Leg Romanian Deadlift Strength Standards

Single Leg Romanian Deadlift rounds out the related list because it is a weighted single-leg hinge benchmark with a clear standards page of its own. The setup differs because Single Leg Romanian Deadlift uses added weight and a standing hinge instead of floor repetitions. Try it next when you want to move from floor bridge control to a balance-heavy weighted hinge check without treating a stronger result there as a replacement for this hold score.

Frequently Asked Questions

What time should I enter?

Enter weaker-side hold time from one continuous Single Leg Glute Bridge Hold test. If you hold 40 sec, rest, then do more, enter 40 only for that first attempt. If the next seconds miss the position standard, your score is the last valid time. This keeps the calculator tied to one clear effort instead of a training-session total.

What counts as a valid Single Leg Glute Bridge Hold hold?

A valid hold follows the same rule from the first second to the last: lie supine with one working foot planted, keep the non-working leg off the floor, lift into a controlled bridge top, keep the pelvis level, arms passive, and hold without hand pushing, foot taps, external support, or added weight. The attempt should be easy to defend on video because the calculator cannot see your setup or stop point. If the hold is valid through 40 sec and then position breaks, enter 40. When in doubt, use the earlier time and retest later.

Do nearby variations count?

No. single-leg glute bridge repetitions, two-leg bridge holds, hip thrusts, feet-elevated bridges may be useful in training, but they are not the Single Leg Glute Bridge Hold test used here. For example, a 60-second variation should not be entered as 60 seconds for this calculator if the setup changes the support, leverage, or stop rule. Retest with the exact standard when you want a result that matches this calculator, and use a related tool when the variation is the one you actually performed.

Why use the calculator instead of only reading the table?

The table is helpful for a quick standards check, but the calculator gives a direct answer from your inputs. It returns the level, the range you landed in, and the next clear time target. For example, a man age 20-29 entering 40 seconds can see Intermediate, the 40 sec-1:09 range, and 1:10 as the Advanced target without doing boundary math.

What if my result looks different than expected?

Check the inputs first: sex, age range, bodyweight unit, exercise selection, and seconds. For example, entering 145 is not the same as entering 1:45, and adding several attempts together can show a much stronger level than one valid hold. Then check the test quality. Many surprising Single Leg Glute Bridge Hold results come from counting time after the position changed.

When should I stop the timer?

Stop timing at the first clear break in the test. For example, if the hold is valid through 20 sec but then uses support, changes leverage, or loses the required position, enter 20. Breathing hard is fine; changing the exercise is not. A strict lower time will give you a more useful target than a larger score from a different hold rule.