Endura

Lying Close Grip Barbell Triceps Extension Behind The Head Strength Standards Calculator

Under strict Lying Close Grip Barbell Triceps Extension Behind The Head strength standards, Novice starts around 0.10x bodyweight for men and 0.07x for women, while Elite starts around 0.34x for men and 0.25x for women.

Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Lying Close Grip Barbell Triceps Extension Behind The Head is Novice, Intermediate, Advanced, or Elite for your bodyweight.

The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Lying Close Grip Barbell Triceps Extension Behind The Head standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.

Understanding Your Behind-the-Head Triceps Extension Strength Score

Your Behind-the-Head Triceps Extension strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Behind-the-Head Triceps Extension, valid behind-the-head triceps extension reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.

This result is specific to behind-the-head triceps extension. A counted rep should meet this standard: Lower the bar behind the head under control by bending the elbows, then extend the elbows to return to the defined finish without pressing from the chest and finish in a valid position that shows controlled elbow extension with the upper arms consistent and no close-grip bench press, pullover swing, bounce, or shoulder heave. The score is not a general label for every nearby vertical push exercise, and it should not be used for Lying Barbell Triceps Extension to forehead, Close Grip Bench Press, JM Press, Barbell Pullover, Overhead Triceps Extension standing, Dumbbell Lying Triceps Extension, Cable Lying Triceps Extension, Partial lockout reps, Bounced behind-head reps. Those variations may be useful training choices, but they answer a different standards question.

For example, a 200 lb male with a 48 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 38 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.

The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.

Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.

Behind-the-Head Triceps Extension Strength Standards

Behind-the-Head Triceps Extension standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.

The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the entered weight for strict Behind-the-Head Triceps Extension, valid reps, and no substitutions from related lifts.

Men’s Behind-the-Head Triceps Extension Strength Standards

BodyweightNoviceIntermediateAdvancedEliteStretch
120 lb12 lb19 lb29 lb41 lb+54 lb
130 lb13 lb21 lb31 lb44 lb+59 lb
140 lb14 lb22 lb34 lb48 lb+63 lb
150 lb15 lb24 lb36 lb51 lb+68 lb
160 lb16 lb26 lb38 lb54 lb+72 lb
170 lb17 lb27 lb41 lb58 lb+77 lb
180 lb18 lb29 lb43 lb61 lb+81 lb
190 lb19 lb30 lb46 lb65 lb+86 lb
200 lb20 lb32 lb48 lb68 lb+90 lb
210 lb21 lb34 lb50 lb71 lb+95 lb
220 lb22 lb35 lb53 lb75 lb+99 lb
230 lb23 lb37 lb55 lb78 lb+104 lb
240 lb24 lb38 lb58 lb82 lb+108 lb
250 lb25 lb40 lb60 lb85 lb+113 lb
260 lb26 lb42 lb62 lb88 lb+117 lb

Women’s Behind-the-Head Triceps Extension Strength Standards

BodyweightNoviceIntermediateAdvancedEliteStretch
100 lb7 lb11 lb17 lb25 lb+34 lb
110 lb7 lb12 lb19 lb28 lb+37 lb
120 lb8 lb13 lb20 lb30 lb+41 lb
130 lb8 lb14 lb22 lb33 lb+44 lb
140 lb9 lb15 lb24 lb35 lb+48 lb
150 lb10 lb17 lb26 lb38 lb+51 lb
160 lb10 lb18 lb27 lb40 lb+54 lb
170 lb11 lb19 lb29 lb43 lb+58 lb
180 lb12 lb20 lb31 lb45 lb+61 lb
190 lb12 lb21 lb32 lb48 lb+65 lb
200 lb13 lb22 lb34 lb50 lb+68 lb
210 lb14 lb23 lb36 lb53 lb+71 lb
220 lb14 lb24 lb37 lb55 lb+75 lb

Men: Beginner is below 0.100x, Novice begins at 0.100x, Intermediate begins at 0.160x, Advanced begins at 0.240x, Elite begins at 0.340x, and Stretch is 0.450x bodyweight. Women: Beginner is below 0.065x, Novice begins at 0.065x, Intermediate begins at 0.110x, Advanced begins at 0.170x, Elite begins at 0.250x, and Stretch is 0.340x bodyweight.

At 200 lb bodyweight, a male lifter needs about 48 lb for Advanced and 68 lb for Elite. At 150 lb bodyweight, a female lifter needs about 26 lb for Advanced and 38 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.

How the Behind-the-Head Triceps Extension Calculator Works

The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.

Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 48 lb estimated 1RM, the ratio is near 0.240x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.

Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Behind-the-Head Triceps Extension and valid behind-the-head triceps extension reps that meet the accepted rule.

Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.

The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Behind-the-Head Triceps Extension question described here, using the same bodyweight-ratio logic as the rest of the standards system.

Elite Behind-the-Head Triceps Extension Strength Levels

Elite Behind-the-Head Triceps Extension strength starts at 0.340x bodyweight for men and 0.250x bodyweight for women. Stretch benchmarks are 0.450x for men and 0.340x for women, marking unusually strong results inside this standards system.

At 200 lb bodyweight, Elite begins around 68 lb for men. At 150 lb bodyweight, Elite begins around 38 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Behind-the-Head Triceps Extension, valid behind-the-head triceps extension reps, and the accepted rep.

Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger behind-the-head triceps extension.

Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.

Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.

Behind-the-Head Triceps Extension Strength Compared to Other Lifts

Comparisons are useful because they explain why standards differ. Behind-the-Head Triceps Extension sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.

Related movementComparison purposeWhat the gap can reveal
Lying Barbell Triceps Extensionsclosest neighboring standardA higher behind-the-head triceps extension score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates.
Barbell Overhead Triceps Extensionsame family contrastIf the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here.
Swiss Bar Skull Crusherequipment contrastIf this score is far ahead, confirm the set did not drift into a disallowed variation.
Dumbbell Lying Triceps Extensionsrange and control comparisonThe comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different.
Cable Lying Triceps Extensionheavier strength ceilingA similar tier can suggest balanced development, but it still does not make the two entries interchangeable.
Close Grip Bench Presstechnique transfer checkUse the gap to choose training work instead of forcing one result to predict the other.

If a related lift is much stronger, look for the one constraint unique to behind-the-head triceps extension: range, support position, grip, bracing, or finish control. If behind-the-head triceps extension is much stronger, confirm that the set did not become one of the disallowed variations.

Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.

The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.

Milestones in Behind-the-Head Triceps Extension Strength

Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.

MilestoneExample targetWhy it mattersNext focus
First valid strict behind-the-head triceps extension rep3 to 5 clean reps at a repeatable training weightShows the lifter can follow the accepted rule before a max testKeep setup identical across sets
Novice boundaryMen near 20 lb; women near 10 lbCreates a first bodyweight-ratio benchmarkBuild range and control
Intermediate boundaryMen near 32 lb; women near 17 lbShows the lift is no longer just familiarAddress the main limiter
Advanced boundaryMen near 48 lb; women near 26 lbMarks strong relative performance for this exerciseUse smaller jumps and more video review
Elite boundaryMen near 68 lb; women near 38 lbShows high-level strength in the exact standardProtect strict rep quality
Stretch benchmarkMen near 90 lb; women near 51 lbRepresents an unusually strong score in this calculatorRetest sparingly and recover well
Five-rep practice targetUse a set that estimates near 32 lb for a 200 lb male or 17 lb for a 150 lb femaleBuilds a cleaner estimate before a heavier testKeep every rep visually identical
Ten percent improvement targetMove a 32 lb estimate toward 35 lb, or a 17 lb estimate toward 18 lbGives a concrete block goal without requiring a new tierRetest only when the same rule survives

Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Behind-the-Head Triceps Extension milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.

Related tools place Behind-the-Head Triceps Extension inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.

  • Lying Barbell Triceps Extensions is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Behind-the-Head Triceps Extension. Compare it after a clean behind-the-head triceps extension test to see whether this exact setup is the limiter.
  • Barbell Overhead Triceps Extension gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
  • Swiss Bar Skull Crusher is useful when the current score feels surprising. Check it only after the behind-the-head triceps extension reps are valid, then use the difference to choose assistance work.
  • Dumbbell Lying Triceps Extensions can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
  • Cable Lying Triceps Extension helps frame broader strength without replacing the Behind-the-Head Triceps Extension rep standard. If it is far ahead, audit the exact range and finish required here.
  • Close Grip Bench Press offers a technique-transfer check. Similar tiers suggest balanced development, while different tiers can reveal where the path, support, or rep count breaks down.
  • Barbell JM Press belongs in the comparison set because the name may sound close while the accepted rep is not identical. Use the tool as context, not as a replacement entry.
  • Dumbbell Skull Crusher gives another bodyweight-ratio lens for the same training neighborhood. The most useful note is why the gap exists: range, depth, path, bracing, or control.

Use these tools after you have a valid behind-the-head triceps extension result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.

FAQ

What is a good Behind-the-Head Triceps Extension score?

A good score depends on sex, bodyweight, and valid rep quality. Intermediate means the lifter has moved past basic familiarity with the tested movement. Advanced means the result is strong for bodyweight. Elite means the lifter is showing high relative strength in this exact pattern. Use the exact calculator result rather than one absolute weight.

What should I enter in the calculator?

Enter sex, bodyweight, the counted reps from the valid set, and the working weight defined by this tool’s setup. Keep bodyweight and working weight in the same unit family. Do not enter a number from another exercise, a partial-range set that hides invalid reps, or a plate-only note unless this exact tool defines that entry. The entry should match a valid set, because the tier threshold is only meaningful when the rep rule matches the calculator.

Can I enter a related exercise if it feels close?

No. Related lifts are useful for context and comparison, but they are not entries for this calculator. Lying Barbell Triceps Extension to forehead, Close Grip Bench Press, JM Press, Barbell Pullover, Overhead Triceps Extension standing, Dumbbell Lying Triceps Extension, Cable Lying Triceps Extension, Partial lockout reps, Bounced behind-head reps change the strength demand enough to distort the ratio. Use the matching calculator for the movement you actually performed, then compare tiers only after both results use valid reps.

Do multi-rep sets work for this standard?

Yes, as long as every counted rep follows the same rule. The calculator estimates 1RM from the entered reps, then divides by bodyweight. Lower-rep sets usually give a cleaner estimate than long sets where range, path, or control changes under fatigue.

Should I use pounds or kilograms?

Either unit works. Enter bodyweight and working weight in the same unit family shown by the calculator. The tier is based on a ratio, so a correct kilogram entry and a correct pound entry produce the same classification.

Why is my Behind-the-Head Triceps Extension lower than a related lift?

That is often normal. This calculator includes constraints that nearby lifts may not share, such as range, support, path, grip, depth, or finish control. A lower ratio can reveal the exact quality the accepted rep is meant to train. Compare the gap with the standards table before changing the exercise, because the difference may be a valid weakness rather than a bad score.

When should I reject a result?

Reject the result when the setup changes, assistance appears, range shortens, control disappears, or the rep becomes Lying Barbell Triceps Extension to forehead, Close Grip Bench Press, JM Press, Barbell Pullover, Overhead Triceps Extension standing, Dumbbell Lying Triceps Extension, Cable Lying Triceps Extension, Partial lockout reps, Bounced behind-head reps. The calculator is most useful when it reflects the strict version of the exercise, not the heaviest neighboring movement.

How often should I retest?

Retest every four to eight weeks for most training blocks, or after a clear technical improvement. Testing too often can reward short-term risk more than durable strength. Use practice sets between tests to make the accepted rep more automatic.

Use Calculator