Sissy Squat Strength Standards

Understanding Your Sissy Squat Strength Score

Your Sissy Squat score is total strict reps from one continuous test. It is not several sets added together, not a different variation renamed after the fact, and not a count that keeps going after the rep rule changes.

Each counted rep must match this standard: perform bodyweight sissy squat reps through the approved range, keep the trunk and hips controlled, and return to a stable top position without using hand assistance or changing the movement. The calculator treats the final valid rep count as the score, so a set of 15 clean reps is entered as 15, even if the next loose rep almost finished.

This scoring rule matters because Sissy Squat can be overcounted when fatigue changes the range, setup, or rhythm. A smaller strict score gives a better standards result than a bigger number built from partial reps, assistance, or a different exercise.

Sissy Squat Strength Standards

The public standards tables below are age/sex-first reference tables. Choose your sex and age range first, then compare your strict rep score with the level columns.

For example, a man age 20-29 reaches Novice at 6 reps, Intermediate at 16, Advanced at 30, and Elite at 50. A woman age 20-29 reaches Novice at 6 reps, Intermediate at 16, Advanced at 28, and Elite at 46. Beginner means the result is below the Novice line for that age group.

Men – Sissy Squat Standards Reference

Women – Sissy Squat Standards Reference

Use the calculator when you want the page to do the lookup for you. The tables are useful for scanning the main standards, while the calculator gives a direct level, current range, and next target from the exact inputs you enter.

What Is a Good Sissy Squat Score?

A good Sissy Squat score usually starts at Intermediate when every rep is strict. In the public tables, Intermediate starts at 16 reps for men age 20-29, 13 for men age 40-49, 16 for women age 20-29, and 13 for women age 40-49.

Good does not mean the set looked fast or dramatic. It means the same setup, range, finish, and reset stayed visible after fatigue arrived. If the final reps turn into shortcuts, the valid score stopped earlier.

If you are near a boundary, one clean rep can matter. A man age 20-29 who enters 15 reps remains below Intermediate, while 16 strict reps reaches Intermediate. Film a serious test from an angle that shows the range and reset before entering the score.

Test Your Sissy Squat Strength

Test Sissy Squat with one continuous set after a normal warm-up. The test standard is simple: perform bodyweight sissy squat reps through the approved range, keep the trunk and hips controlled, and return to a stable top position without using hand assistance or changing the movement. Keep counting only while every rep matches that same standard.

• Enter total strict reps from one set.
• Use the same setup for the whole test.
• Finish each rep before counting it.
• Return to the approved reset before the next rep.
• Stop counting when range, control, assistance, or exercise choice changes.

Stop the score at the first rep that no longer matches the test. If rep 16 is strict and rep 17 is partial or assisted, enter 16.

What Counts and What Does Not Count

Count only strict bodyweight sissy squat reps with controlled knee travel and return from one continuous test. A valid score comes from the same setup, same range, and same reset from the first rep to the last counted rep.

When a rep is borderline, leave it out. A lower strict score is more useful than a bigger number built from partial range, assistance, or another movement. The number you enter should be the last rep that still looked like the Sissy Squat test you started.

How the Sissy Squat Calculator Works

The calculator starts with the strict rep count you enter, then compares it with the standards for the form fields you selected. For this Sissy Squat tool, the selected exercise is strict bodyweight sissy squat reps with controlled knee travel and return and the score type is total strict reps finished through the required range. More strict reps means a stronger result, as long as those reps came from the same Sissy Squat test.

For Sissy Squat, the useful number is the count that matches the approved test. The calculator turns that number into a level, range, and next target, so you do not have to scan the table and do boundary math yourself. A man age 20-29 who enters 16 reps lands at Intermediate; the next major target is 30 reps for Advanced.

The calculator does not judge the set for you. It assumes the number you enter came from valid Sissy Squat. If late reps lost the standard, enter the earlier clean count.

How to Read Your Sissy Squat Results

After you enter your reps, the result screen shows where that set lands for the selected sex and age range. The main label is your standards level, such as Beginner, Novice, Intermediate, Advanced, or Elite. The supporting line repeats the exercise and score context, so check that the inputs match the test you actually performed.

The result also tells you where you sit inside the level and what target comes next. For example, a woman age 20-29 who enters 16 reps lands at Intermediate, in the 16-27 rep range. Because 28 reps starts Advanced for that group, the next clear target is 12 more strict reps.

If the result looks wrong, check the inputs before retesting. A wrong age range, wrong sex selection, wrong unit, or accidental entry of several sets can move the result. Then check the rep standard. A set that looked strong but became short, rushed, or assisted should be entered as the last strict completed rep.

Elite Sissy Squat Strength Levels

Elite Sissy Squat scores are high-rep sets that stay valid when the required range and reset are hardest to keep. In the public tables, Elite begins at 50 reps for men age 20-29, 40 for men age 40-49, 46 for women age 20-29, and 37 for women age 40-49.

The final reps matter most. Elite is not just reaching a big number; it means the same Sissy Squat standard still holds near the end of the set. If the last few reps are mostly shortcuts, the valid score stopped earlier.

Related Tools

Bodyweight Lunges Strength Standards

Bodyweight Lunges gives the closest nearby checkpoint because it is a lower-body bodyweight rep standard. The scoring split matters: Bodyweight Lunges use a floor lunge pattern instead of stepping onto a box. Use it after this test to compare step-up control with a lunge benchmark; for example, compare the two results only as separate standards, not as a shared rep total.

Split Squat Strength Standards

Choose Split Squat when the next question is still in the same neighborhood: single-leg lower-body bodyweight standard. It differs from the current calculator because Split Squat does not use a box or step height; instead of treating both scores as interchangeable, keep the setup difference visible. This is the better next tool if you want to compare step-up performance with a fixed-stance knee and hip test, especially when 1 variation feels much easier than another.

Walking Lunge Strength Standards

Walking Lunge is related for a practical reason: it is a moving lower-body rep standard that can confirm whether the same general capacity carries over. The test changes because Walking Lunge alternates forward travel instead of returning to a step-up setup. Check it next to compare a fixed step-up score with a traveling lunge score; keep the scores separate so a strong result in 1 pattern does not hide a weakness in the other.

Reverse Lunge Strength Standards

Reverse Lunge belongs in the next-step list through its reverse-direction lunge benchmark. Unlike the test on this page, Reverse Lunge uses a backward step from the floor, not a box ascent. It is useful after this calculator when you want to check whether a backward lunge standard matches the step-up result, then compare which result sits closer to Novice, Intermediate, Advanced, or Elite.

Bodyweight Squat Strength Standards

Use Bodyweight Squat as the final adjacent check because it is a two-leg lower-body bodyweight standard. The difference is not cosmetic: Bodyweight Squat scores two-leg reps instead of per-side step-ups. Go there after this page to compare per-side step-up ability with a two-leg squat benchmark, while reserving today’s score for reps that match this exact test from rep 1 onward.

Frequently Asked Questions

What number should I enter?

Enter total strict reps from one continuous Sissy Squat test. If you complete 16 clean reps, rest, then do more, enter 16 for this test, not the total from both sets. If the next rep misses the finish or reset, your score is the last countable rep. This keeps the calculator tied to one clear effort instead of a training-session total.

What counts as a valid Sissy Squat rep?

A valid rep follows the same rule from the first rep to the last: perform bodyweight sissy squat reps through the approved range, keep the trunk and hips controlled, and return to a stable top position without using hand assistance or changing the movement. The rep should be easy to defend on video because the calculator cannot see your range, reset, or setup. If reps 1-16 are clean but the next rep only reaches partial range, enter 16. When in doubt, leave the questionable rep out and retest later.

Do nearby variations count?

No. weighted sissy squats, machine sissy squats, regular bodyweight squats, reverse Nordic curls may be useful in training, but they are not the Sissy Squat test used here. For example, 12 reps of a nearby variation should not be entered as 12 Sissy Squat reps. Entering them anyway can make the result look stronger than the actual test. Retest with the exact standard when you want a result that matches this calculator, and use a related tool when the variation is the one you actually performed.

Why use the calculator instead of only reading the table?

The table is helpful for a quick standards check, but the calculator gives a direct answer from your inputs. It returns the level, the range you landed in, and the next clear rep target. For example, a man age 20-29 entering 16 reps can see Intermediate, the 16-29 range, and 30 reps as the Advanced target without doing boundary math.

What if my result looks different than expected?

Check the inputs first: sex, age range, bodyweight unit, exercise selection, and total reps. For example, entering 18 after adding 2 sets together can show a much stronger level than one strict 9-rep set. A wrong age range or an accidental multi-set total can move the level quickly. Then check the test quality. Many surprising Sissy Squat results come from counting late reps after the movement changed. If the inputs are right, retest with video and enter only the last strict completed rep.

When should I stop counting reps?

Stop counting at the first rep that no longer matches the test. For example, if rep 10 finishes cleanly but rep 11 changes setup, uses assistance, or only reaches partial range, enter 10. Breathing hard is fine; changing the exercise or losing the finish is not. A strict lower number will give you a more useful target than a larger score that came from a different rep rule.