Endura

Machine Glute Ham Raise Strength Standards Calculator

Under strict Machine Glute Ham Raise strength standards, Novice starts around 0.30x bodyweight for men and 0.22x for women, while Elite starts around 0.96x for men and 0.75x for women.

Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Machine Glute Ham Raise is Novice, Intermediate, Advanced, or Elite for your bodyweight.

The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Machine Glute Ham Raise standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.

Understanding Your Machine Glute Ham Raise Strength Score

Your Machine Glute Ham Raise strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Machine Glute Ham Raise, valid Machine Glute Ham Raise reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.

This result is specific to Machine Glute Ham Raise. A counted rep should meet this standard: The machine must move through a clear, repeatable range that matches controlled knee-flexion and hip-extension raise from an inclined or lowered start to a controlled trunk-raised finish on a glute-ham machine path. A valid finish requires the machine’s intended end position under control with stable body position and no obvious momentum or outside assistance. The score is not a general label for every nearby hinge exercise, and it should not be used for Bodyweight Glute Ham Raise without documented weight convention, Assisted Glute Ham Raise where assistance is entered as positive weight, Nordic Curl, Lying Leg Curl, Seated Leg Curl, Machine Back Extension, Romanian Deadlift, Good Morning, Hip Thrust. Those variations may be useful training choices, but they answer a different standards question.

For example, a 200 lb male with a 144 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 113 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.

The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.

Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.

Machine Glute Ham Raise Strength Standards

The Machine Glute Ham Raise tables show where an estimated 1RM falls from Beginner through Elite, plus the Stretch benchmark, at each listed bodyweight. The ranges use allometric scaling, so they rise with bodyweight without increasing pound-for-pound.

Choose the table for your sex, find the row nearest your bodyweight, and locate the range containing your estimated 1RM. Each boundary belongs to the higher level. The calculator uses your exact bodyweight and remains the final result for bodyweights between rows.

Men’s Machine Glute Ham Raise Strength Standards

BodyweightBeginnerNoviceIntermediateAdvancedEliteStretch
120 lbUnder 42 lb42–67 lb68–100 lb101–134 lb135–159 lb160 lb+
130 lbUnder 44 lb44–70 lb71–105 lb106–141 lb142–168 lb169 lb+
140 lbUnder 47 lb47–74 lb75–111 lb112–148 lb149–177 lb178 lb+
150 lbUnder 49 lb49–78 lb79–116 lb117–155 lb156–185 lb186 lb+
160 lbUnder 51 lb51–81 lb82–121 lb122–162 lb163–193 lb194 lb+
170 lbUnder 53 lb53–84 lb85–126 lb127–169 lb170–201 lb202 lb+
180 lbUnder 55 lb55–88 lb89–131 lb132–176 lb177–209 lb210 lb+
190 lbUnder 57 lb57–91 lb92–136 lb137–182 lb183–217 lb218 lb+
200 lbUnder 59 lb59–94 lb95–141 lb142–188 lb189–225 lb226 lb+
210 lbUnder 61 lb61–97 lb98–145 lb146–195 lb196–232 lb233 lb+
220 lbUnder 63 lb63–100 lb101–150 lb151–201 lb202–239 lb240 lb+
230 lbUnder 65 lb65–103 lb104–155 lb156–207 lb208–247 lb248 lb+
240 lbUnder 67 lb67–107 lb108–159 lb160–213 lb214–254 lb255 lb+
250 lbUnder 68 lb68–109 lb110–164 lb165–219 lb220–261 lb262 lb+
260 lbUnder 70 lb70–112 lb113–168 lb169–225 lb226–268 lb269 lb+

Women’s Machine Glute Ham Raise Strength Standards

BodyweightBeginnerNoviceIntermediateAdvancedEliteStretch
100 lbUnder 25 lb25–40 lb41–62 lb63–85 lb86–104 lb105 lb+
110 lbUnder 27 lb27–43 lb44–66 lb67–91 lb92–111 lb112 lb+
120 lbUnder 28 lb28–46 lb47–71 lb72–96 lb97–118 lb119 lb+
130 lbUnder 30 lb30–48 lb49–74 lb75–102 lb103–124 lb125 lb+
140 lbUnder 32 lb32–51 lb52–78 lb79–107 lb108–131 lb132 lb+
150 lbUnder 33 lb33–53 lb54–82 lb83–112 lb113–137 lb138 lb+
160 lbUnder 34 lb34–55 lb56–86 lb87–117 lb118–143 lb144 lb+
170 lbUnder 36 lb36–58 lb59–89 lb90–122 lb123–149 lb150 lb+
180 lbUnder 37 lb37–60 lb61–93 lb94–127 lb128–155 lb156 lb+
190 lbUnder 39 lb39–62 lb63–96 lb97–131 lb132–161 lb162 lb+
200 lbUnder 40 lb40–64 lb65–100 lb101–136 lb137–166 lb167 lb+
210 lbUnder 41 lb41–67 lb68–103 lb104–140 lb141–172 lb173 lb+
220 lbUnder 43 lb43–69 lb70–106 lb107–145 lb146–177 lb178 lb+

These are Endura’s practical Machine Glute Ham Raise standards. They are built from exercise-specific reference thresholds and validated against the calculator’s exact lower-inclusive tier boundaries; they are not population averages.

How the Machine Glute Ham Raise Calculator Works

The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.

Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 144 lb estimated 1RM, the ratio is near 0.720x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.

Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Machine Glute Ham Raise and valid Machine Glute Ham Raise reps that meet the accepted rule.

Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.

The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Machine Glute Ham Raise question described here, using the same bodyweight-ratio logic as the rest of the standards system.

Elite Machine Glute Ham Raise Strength Levels

Elite entries should still show controlled hip position and hamstring-led reps, not a shortened hinge that turns the score into a different machine pattern.

Elite Machine Glute Ham Raise strength means reaching the Elite target for your sex and exact bodyweight. The target rises with bodyweight without increasing pound-for-pound, so use the calculator for your exact Elite and Stretch targets.

At 200 lb bodyweight, Elite begins around 192 lb for men. At 150 lb bodyweight, Elite begins around 113 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Machine Glute Ham Raise, valid Machine Glute Ham Raise reps, and the accepted rep.

Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Machine Glute Ham Raise.

Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.

Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.

Machine Glute Ham Raise Strength Compared to Other Lifts

Comparisons are useful because they explain why standards differ. Machine Glute Ham Raise sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.

Related movementComparison purposeWhat the gap can reveal
Bodyweight Nordic Curlclosest neighboring standardA higher Machine Glute Ham Raise score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates.
Machine Back Extensionsame family contrastIf the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here.
Lying Leg Curlequipment contrastIf this score is far ahead, confirm the set did not drift into a disallowed variation.
Seated Leg Curlrange and control comparisonThe comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different.
Romanian Deadliftheavier strength ceilingA similar tier can suggest balanced development, but it still does not make the two entries interchangeable.
Hip Thrust Machinetechnique transfer checkUse the gap to choose training work instead of forcing one result to predict the other.

If a related lift is much stronger, look for the one constraint unique to Machine Glute Ham Raise: range, support position, grip, bracing, or finish control. If Machine Glute Ham Raise is much stronger, confirm that the set did not become one of the disallowed variations.

Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.

The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.

Milestones in Machine Glute Ham Raise Strength

Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.

MilestoneExample targetWhy it mattersNext focus
First valid strict machine glute ham raise rep3 to 5 clean reps at a repeatable training weightShows the lifter can follow the accepted rule before a max testKeep setup identical across sets
Novice boundaryMen near 60 lb; women near 33 lbCreates a first bodyweight-ratio benchmarkBuild range and control
Intermediate boundaryMen near 96 lb; women near 54 lbShows the lift is no longer just familiarAddress the main limiter
Advanced boundaryMen near 144 lb; women near 83 lbMarks strong relative performance for this exerciseUse smaller jumps and more video review
Elite boundaryMen near 192 lb; women near 113 lbShows high-level strength in the exact standardProtect strict rep quality
Stretch benchmarkMen near 230 lb; women near 138 lbRepresents an unusually strong score in this calculatorRetest sparingly and recover well
Five-rep practice targetUse a set that estimates near 96 lb for a 200 lb male or 54 lb for a 150 lb femaleBuilds a cleaner estimate before a heavier testKeep every rep visually identical
Ten percent improvement targetMove a 96 lb estimate toward 106 lb, or a 54 lb estimate toward 59 lbGives a concrete block goal without requiring a new tierRetest only when the same rule survives

Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Machine Glute Ham Raise milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.

Related tools place Machine Glute Ham Raise inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.

  • Bodyweight Nordic Curl is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Machine Glute Ham Raise. Compare it after a clean Machine Glute Ham Raise test to see whether this exact setup is the limiter.
  • Machine Back Extension gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
  • Lying Leg Curl is useful when the current score feels surprising. Check it only after the Machine Glute Ham Raise reps are valid, then use the difference to choose assistance work.
  • Seated Leg Curl can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
  • Romanian Deadlift helps frame broader strength without replacing the Machine Glute Ham Raise standard. If it is far ahead, audit the exact range and finish required here.

Use these tools after you have a valid Machine Glute Ham Raise result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.

Use Calculator