Swiss Bar Close Grip Bench Press Strength Standards Calculator
Under strict Swiss Bar Close Grip Bench Press strength standards, Novice starts around 0.58x bodyweight for men and 0.34x for women, while Elite starts around 1.3x for men and 0.88x for women.
Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Swiss Bar Close Grip Bench Press is Novice, Intermediate, Advanced, or Elite for your bodyweight.
The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Swiss Bar Close Grip Bench Press standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.
Understanding Your Swiss Bar Close Grip Bench Press Strength Score
Your Swiss Bar Close Grip Bench Press strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Swiss Bar Close Grip Bench Press, valid Swiss Bar Close Grip Bench Press reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.
This result is specific to Swiss Bar Close Grip Bench Press. A counted rep should meet this standard: the lifter must lower under control to the approved chest or near-chest bottom position, then press to full controlled elbow extension. A valid finish requires controlled lockout with stable shoulders, wrists, and bar path without rack contact or spotter assistance. The score is not a general label for every nearby horizontal push exercise, and it should not be used for straight-bar close-grip bench presses, wider Swiss bar bench presses, floor presses, JM presses, skull crushers, machine chest presses, bounced or assisted reps. Those variations may be useful training choices, but they answer a different standards question.
For example, a 200 lb male with a 212 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 132 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.
The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.
Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.
Swiss Bar Close Grip Bench Press Strength Standards
The Swiss Bar Close Grip Bench Press tables show where an estimated 1RM falls from Beginner through Elite, plus the Stretch benchmark, at each listed bodyweight. The ranges use allometric scaling, so they rise with bodyweight without increasing pound-for-pound.
Choose the table for your sex, find the row nearest your bodyweight, and locate the range containing your estimated 1RM. Each boundary belongs to the higher level. The calculator uses your exact bodyweight and remains the final result for bodyweights between rows.
Men’s Swiss Bar Close Grip Bench Press Strength Standards
| Bodyweight | Beginner | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|---|
| 120 lb | Under 82 lb | 82–111 lb | 112–148 lb | 149–184 lb | 185–212 lb | 213 lb+ |
| 130 lb | Under 86 lb | 86–117 lb | 118–156 lb | 157–194 lb | 195–223 lb | 224 lb+ |
| 140 lb | Under 91 lb | 91–123 lb | 124–164 lb | 165–204 lb | 205–235 lb | 236 lb+ |
| 150 lb | Under 95 lb | 95–129 lb | 130–172 lb | 173–213 lb | 214–246 lb | 247 lb+ |
| 160 lb | Under 99 lb | 99–135 lb | 136–179 lb | 180–223 lb | 224–257 lb | 258 lb+ |
| 170 lb | Under 103 lb | 103–140 lb | 141–187 lb | 188–232 lb | 233–267 lb | 268 lb+ |
| 180 lb | Under 107 lb | 107–146 lb | 147–194 lb | 195–241 lb | 242–278 lb | 279 lb+ |
| 190 lb | Under 111 lb | 111–151 lb | 152–201 lb | 202–250 lb | 251–288 lb | 289 lb+ |
| 200 lb | Under 115 lb | 115–156 lb | 157–208 lb | 209–259 lb | 260–298 lb | 299 lb+ |
| 210 lb | Under 119 lb | 119–161 lb | 162–215 lb | 216–267 lb | 268–308 lb | 309 lb+ |
| 220 lb | Under 122 lb | 122–167 lb | 168–222 lb | 223–276 lb | 277–318 lb | 319 lb+ |
| 230 lb | Under 126 lb | 126–172 lb | 173–228 lb | 229–284 lb | 285–327 lb | 328 lb+ |
| 240 lb | Under 130 lb | 130–177 lb | 178–235 lb | 236–292 lb | 293–337 lb | 338 lb+ |
| 250 lb | Under 133 lb | 133–182 lb | 183–242 lb | 243–300 lb | 301–346 lb | 347 lb+ |
| 260 lb | Under 137 lb | 137–186 lb | 187–248 lb | 249–308 lb | 309–355 lb | 356 lb+ |
Women’s Swiss Bar Close Grip Bench Press Strength Standards
| Bodyweight | Beginner | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|---|
| 100 lb | Under 39 lb | 39–56 lb | 57–77 lb | 78–100 lb | 101–118 lb | 119 lb+ |
| 110 lb | Under 41 lb | 41–60 lb | 61–82 lb | 83–106 lb | 107–126 lb | 127 lb+ |
| 120 lb | Under 44 lb | 44–64 lb | 65–87 lb | 88–113 lb | 114–133 lb | 134 lb+ |
| 130 lb | Under 46 lb | 46–67 lb | 68–92 lb | 93–119 lb | 120–141 lb | 142 lb+ |
| 140 lb | Under 49 lb | 49–71 lb | 72–96 lb | 97–125 lb | 126–148 lb | 149 lb+ |
| 150 lb | Under 51 lb | 51–74 lb | 75–101 lb | 102–131 lb | 132–155 lb | 156 lb+ |
| 160 lb | Under 53 lb | 53–77 lb | 78–105 lb | 106–137 lb | 138–162 lb | 163 lb+ |
| 170 lb | Under 55 lb | 55–81 lb | 82–110 lb | 111–142 lb | 143–169 lb | 170 lb+ |
| 180 lb | Under 58 lb | 58–84 lb | 85–114 lb | 115–148 lb | 149–175 lb | 176 lb+ |
| 190 lb | Under 60 lb | 60–87 lb | 88–118 lb | 119–154 lb | 155–182 lb | 183 lb+ |
| 200 lb | Under 62 lb | 62–90 lb | 91–123 lb | 124–159 lb | 160–188 lb | 189 lb+ |
| 210 lb | Under 64 lb | 64–93 lb | 94–127 lb | 128–164 lb | 165–194 lb | 195 lb+ |
| 220 lb | Under 66 lb | 66–96 lb | 97–131 lb | 132–169 lb | 170–200 lb | 201 lb+ |
These are Endura’s practical Swiss Bar Close Grip Bench Press standards. They are built from exercise-specific reference thresholds and validated against the calculator’s exact lower-inclusive tier boundaries; they are not population averages.
How the Swiss Bar Close Grip Bench Press Calculator Works
The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.
Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 212 lb estimated 1RM, the ratio is near 1.060x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.
Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Swiss Bar Close Grip Bench Press and valid Swiss Bar Close Grip Bench Press reps that meet the accepted rule.
Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.
The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Swiss Bar Close Grip Bench Press question described here, using the same bodyweight-ratio logic as the rest of the standards system.
Elite Swiss Bar Close Grip Bench Press Strength Levels
Elite Swiss Bar Close Grip Bench Press strength means reaching the Elite target for your sex and exact bodyweight. The target rises with bodyweight without increasing pound-for-pound, so use the calculator for your exact Elite and Stretch targets.
At 200 lb bodyweight, Elite begins around 264 lb for men. At 150 lb bodyweight, Elite begins around 132 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Swiss Bar Close Grip Bench Press, valid Swiss Bar Close Grip Bench Press reps, and the accepted rep.
Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Swiss Bar Close Grip Bench Press.
Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.
Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.
Swiss Bar Close Grip Bench Press Strength Compared to Other Lifts
Comparisons are useful because they explain why standards differ. Swiss Bar Close Grip Bench Press sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.
| Related movement | Comparison purpose | What the gap can reveal |
|---|---|---|
| Close Grip Bench Press | closest neighboring standard | A higher Swiss Bar Close Grip Bench Press score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates. |
| Swiss Bar Floor Press | same family contrast | If the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here. |
| Close Grip Floor Press | equipment contrast | If this score is far ahead, confirm the set did not drift into a disallowed variation. |
| Barbell Floor Press | range and control comparison | The comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different. |
| Smith Machine Bench Press | heavier strength ceiling | A similar tier can suggest balanced development, but it still does not make the two entries interchangeable. |
| Dumbbell Floor Press | technique transfer check | Use the gap to choose training work instead of forcing one result to predict the other. |
If a related lift is much stronger, look for the one constraint unique to Swiss Bar Close Grip Bench Press: range, support position, grip, bracing, or finish control. If Swiss Bar Close Grip Bench Press is much stronger, confirm that the set did not become one of the disallowed variations.
Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.
The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.
Milestones in Swiss Bar Close Grip Bench Press Strength
Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.
| Milestone | Example target | Why it matters | Next focus |
|---|---|---|---|
| First valid strict swiss bar close grip bench press rep | 3 to 5 clean reps at a repeatable training weight | Shows the lifter can follow the accepted rule before a max test | Keep setup identical across sets |
| Novice boundary | Men near 116 lb; women near 51 lb | Creates a first bodyweight-ratio benchmark | Build range and control |
| Intermediate boundary | Men near 160 lb; women near 75 lb | Shows the lift is no longer just familiar | Address the main limiter |
| Advanced boundary | Men near 212 lb; women near 102 lb | Marks strong relative performance for this exercise | Use smaller jumps and more video review |
| Elite boundary | Men near 264 lb; women near 132 lb | Shows high-level strength in the exact standard | Protect strict rep quality |
| Stretch benchmark | Men near 304 lb; women near 156 lb | Represents an unusually strong score in this calculator | Retest sparingly and recover well |
| Five-rep practice target | Use a set that estimates near 160 lb for a 200 lb male or 75 lb for a 150 lb female | Builds a cleaner estimate before a heavier test | Keep every rep visually identical |
| Ten percent improvement target | Move a 160 lb estimate toward 176 lb, or a 75 lb estimate toward 83 lb | Gives a concrete block goal without requiring a new tier | Retest only when the same rule survives |
Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Swiss Bar Close Grip Bench Press milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.
Related Strength Standards Tools
Related tools place Swiss Bar Close Grip Bench Press inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.
- Close Grip Bench Press is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Swiss Bar Close Grip Bench Press. Compare it after a clean Swiss Bar Close Grip Bench Press test to see whether this exact setup is the limiter.
- Swiss Bar Floor Press gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
- Close Grip Floor Press is useful when the current score feels surprising. Check it only after the Swiss Bar Close Grip Bench Press reps are valid, then use the difference to choose assistance work.
- Barbell Floor Press can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
- Smith Machine Bench Press helps frame broader strength without replacing the Swiss Bar Close Grip Bench Press standard. If it is far ahead, audit the exact range and finish required here.
Use these tools after you have a valid Swiss Bar Close Grip Bench Press result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.