Reverse Grip Lat Pulldown Strength Standards Calculator
Compare your Reverse Grip Lat Pulldown strength with Endura's strength standards for men and women at your bodyweight. A useful benchmark for a good one-rep max is our Intermediate standard: approximately 175 lb at 190 lb for a man and 106 lb at 150 lb for a woman.
How does your best lift compare? Enter your bodyweight, the selected or loaded resistance for the scored set using the same unit family as bodyweight, and the reps you completed below. The calculator estimates your one-rep max and shows your strength level for your bodyweight. Enter the number of repetitions you completed in one set, using whole numbers. The bar must travel down in front of the body through a vertical-pull path. The movement must be driven mainly by the lats, upper back, and elbow flexors working together, not by torso heave, hip drive, shoulder shrugging, or curl-only mechanics.
The calculator compares that estimated one-rep max with the Reverse Grip Lat Pulldown standards for your sex at your bodyweight. It preserves the calculator's existing equations, thresholds, and input meanings; the benchmark is a comparison target, not a working-set prescription.
Understanding Your Reverse Grip Lat Pulldown Strength Score
Your Reverse Grip Lat Pulldown strength score is estimated 1RM divided by bodyweight, using strict seated reverse-grip lat pulldown using selected cable-machine resistance. The result ranks strict seated supinated cable vertical pull, not general gym strength or every nearby movement.
For example, a 180 lb male reaches Advanced around 220 lb and Elite around 277 lb. A 140 lb female reaches Advanced around 134 lb and Elite around 171 lb when the same strict movement rules are preserved.
Those examples only matter when every counted rep uses a supinated underhand grip, controlled overhead start, front-of-body vertical pull, chest-level finish, stable seated position, and controlled return. A higher number made with pronated pulldowns, neutral-grip pulldowns, chin-ups, pull-ups, rows, curls, excessive layback, low-row finishes, stack bounce, or behind-the-neck pulls is not a stronger standards result for this calculator.
The calculator is useful because it turns one repeatable exercise setup into a bodyweight-relative score. Use it for same-setup retests, coaching decisions, and comparison with nearby tools, not for copying another exercise into this calculator.
Reverse Grip Lat Pulldown Strength Standards
Reverse Grip Lat Pulldown strength standards convert estimated 1RM-to-bodyweight ratio into Beginner, Novice, Intermediate, Advanced, Elite, and Stretch benchmarks. Use the table for your sex, choose the nearest bodyweight row, then compare your estimated 1RM with the listed targets.
These tables assume same cable station, bar, grip width, seat height, thigh-pad setup, body angle, overhead range, and chest-level finish. Different equipment friction, station geometry, attachment length, or body position can change effective resistance, so same-setup retests are the cleanest comparison.
Men’s Reverse Grip Lat Pulldown Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 120 lb | 74 lb | 110 lb | 146 lb | 185 lb+ | 216 lb |
| 130 lb | 81 lb | 120 lb | 159 lb | 200 lb+ | 234 lb |
| 140 lb | 87 lb | 129 lb | 171 lb | 216 lb+ | 252 lb |
| 150 lb | 93 lb | 138 lb | 183 lb | 231 lb+ | 270 lb |
| 160 lb | 99 lb | 147 lb | 195 lb | 246 lb+ | 288 lb |
| 170 lb | 105 lb | 156 lb | 207 lb | 262 lb+ | 306 lb |
| 180 lb | 112 lb | 166 lb | 220 lb | 277 lb+ | 324 lb |
| 190 lb | 118 lb | 175 lb | 232 lb | 293 lb+ | 342 lb |
| 200 lb | 124 lb | 184 lb | 244 lb | 308 lb+ | 360 lb |
| 210 lb | 130 lb | 193 lb | 256 lb | 323 lb+ | 378 lb |
| 220 lb | 136 lb | 202 lb | 268 lb | 339 lb+ | 396 lb |
| 230 lb | 143 lb | 212 lb | 281 lb | 354 lb+ | 414 lb |
| 240 lb | 149 lb | 221 lb | 293 lb | 370 lb+ | 432 lb |
| 250 lb | 155 lb | 230 lb | 305 lb | 385 lb+ | 450 lb |
| 260 lb | 161 lb | 239 lb | 317 lb | 400 lb+ | 468 lb |
Women’s Reverse Grip Lat Pulldown Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 100 lb | 46 lb | 70 lb | 96 lb | 122 lb+ | 140 lb |
| 110 lb | 51 lb | 77 lb | 106 lb | 134 lb+ | 154 lb |
| 120 lb | 55 lb | 84 lb | 115 lb | 146 lb+ | 168 lb |
| 130 lb | 60 lb | 91 lb | 125 lb | 159 lb+ | 182 lb |
| 140 lb | 64 lb | 98 lb | 134 lb | 171 lb+ | 196 lb |
| 150 lb | 69 lb | 105 lb | 144 lb | 183 lb+ | 210 lb |
| 160 lb | 74 lb | 112 lb | 154 lb | 195 lb+ | 224 lb |
| 170 lb | 78 lb | 119 lb | 163 lb | 207 lb+ | 238 lb |
| 180 lb | 83 lb | 126 lb | 173 lb | 220 lb+ | 252 lb |
| 190 lb | 87 lb | 133 lb | 182 lb | 232 lb+ | 266 lb |
| 200 lb | 92 lb | 140 lb | 192 lb | 244 lb+ | 280 lb |
| 210 lb | 97 lb | 147 lb | 202 lb | 256 lb+ | 294 lb |
| 220 lb | 101 lb | 154 lb | 211 lb | 268 lb+ | 308 lb |
For men, Beginner below 0.62x, Novice 0.62x to below 0.92x, Intermediate 0.92x to below 1.22x, Advanced 1.22x to below 1.54x, Elite 1.54x and above, stretch benchmark 1.80x. For women, Beginner below 0.46x, Novice 0.46x to below 0.70x, Intermediate 0.70x to below 0.96x, Advanced 0.96x to below 1.22x, Elite 1.22x and above, stretch benchmark 1.40x. Exact threshold values count as the higher listed level, so a ratio equal to the Advanced or Elite boundary earns that level.
How the Reverse Grip Lat Pulldown Calculator Works
The Reverse Grip Lat Pulldown calculator estimates 1RM from the entered weight and reps, divides that estimate by bodyweight, then compares the ratio with sex-specific standards. Ratio = estimated 1RM / bodyweight.
If a 180 lb male records a 277 lb single, the ratio reaches the Elite threshold. If he records a lighter weight for multiple reps, the shared e1RM helper estimates a single-rep equivalent before the bodyweight comparison is made.
If a 140 lb female records 171 lb, the ratio reaches Elite for women. A result below the next threshold shows exactly how much estimated 1RM is needed to advance.
The calculation only applies to Reverse Grip Lat Pulldown reps using a supinated underhand grip, controlled overhead start, front-of-body vertical pull, chest-level finish, stable seated position, and controlled return. Do not enter other exercise results, per-side values when the spec requires a total, assisted reps, partials, or values borrowed from a different setup.
Elite Reverse Grip Lat Pulldown Strength Levels
Elite Reverse Grip Lat Pulldown strength starts at 1.54x bodyweight for men and 1.22x bodyweight for women. Stretch benchmarks sit higher at 1.80x for men and 1.40x for women.
At 180 lb bodyweight, the male Elite benchmark is about 277 lb estimated 1RM and the stretch benchmark is about 324 lb. At 140 lb bodyweight, the female Elite benchmark is about 171 lb and the stretch benchmark is about 196 lb.
Elite status proves the tested movement remains strong under strict conditions. It does not count when the number is inflated by pronated pulldowns, neutral-grip pulldowns, chin-ups, pull-ups, rows, curls, excessive layback, low-row finishes, stack bounce, or behind-the-neck pulls, because those changes alter what the calculator is meant to rank.
Reverse Grip Lat Pulldown Strength Compared to Other Lifts
Reverse Grip Lat Pulldown comparisons are useful for weakness detection, not for copying standards from one calculator into another. Nearby tools change support, path, grip, implement, range, or muscle contribution, which is why the comparison table focuses on contrast rather than substitution.
| Related Movement | Comparison Purpose | Key Difference | What The Gap Reveals |
|---|---|---|---|
| Lat Pulldown | closest strict cable vertical-pull anchor | pronated grip changes wrist position and elbow path | A pronated pulldown gap can show whether the underhand grip helps elbow support or exposes wrist and shoulder limits. |
| Close Grip Lat Pulldown | nearby cable pulldown variation | neutral handles are not the same as a supinated bar | A close-neutral pulldown result that is far higher often points to attachment comfort rather than stronger supinated pulling. |
| Weighted Chin-Up | bodyweight vertical-pull context | bodyweight-plus-added-weight is not cable-stack weight | A chin-up comparison is useful for bodyweight pulling context, but the cable result should move independently of added-weight math. |
| Strict Pull-Up | bodyweight vertical-pull comparison | the body is lifted instead of a cable bar being pulled | A strict pull-up gap highlights full-body control and overhead strength without converting bodyweight reps into stack numbers. |
| Seated Cable Row | horizontal-pull contrast | rows pull toward the body instead of down from overhead | A row gap confirms whether horizontal pulling is appropriately stronger than this front-of-body vertical pull. |
| Cable Biceps Curl | elbow-flexor boundary | curl strength must not replace a vertical pulldown score | A curl gap helps identify elbow-flexor contribution, but the bar still must travel through a pulldown path. |
Use these comparisons when the Reverse Grip Lat Pulldown score does not match training expectations. A strong score in another tool can reveal a setup or control limitation here, but it cannot replace a strict Reverse Grip Lat Pulldown test.
Milestones in Reverse Grip Lat Pulldown Strength
Reverse Grip Lat Pulldown milestones show when the bodyweight-ratio score moves from basic standards toward Advanced, Elite, and Stretch-level performance. Every milestone assumes the same setup, range, and strict rep rules.
| Men’s Milestone | Ratio | 180 lb Target | Decision Rule |
|---|---|---|---|
| Intermediate | 0.92x bodyweight | 166 lb | Build repeatable range before chasing Advanced. |
| Advanced | 1.22x bodyweight | 220 lb | Retest only when the same setup is preserved. |
| Elite | 1.54x bodyweight | 277 lb | Reject any score raised by rebound or body swing. |
| Stretch Benchmark | 1.80x bodyweight | 324 lb | Use as a long-range benchmark, not a shortcut target. |
| Women’s Milestone | Ratio | 140 lb Target | Decision Rule |
|---|---|---|---|
| Intermediate | 0.70x bodyweight | 98 lb | Build repeatable range before chasing Advanced. |
| Advanced | 0.96x bodyweight | 134 lb | Retest only when the same setup is preserved. |
| Elite | 1.22x bodyweight | 171 lb | Reject any score raised by rebound or assistance. |
| Stretch Benchmark | 1.40x bodyweight | 196 lb | Use as a long-range benchmark, not a shortcut target. |
Related Strength Standards Tools
Related strength standards tools place Reverse Grip Lat Pulldown inside the vertical-pull, cable-stack, and bodyweight-pull ecosystem. Each link gives a different diagnostic angle for grip, bar path, range, or elbow contribution rather than a replacement score.
- Lat Pulldown is the strict pronated cable anchor; compare it when the underhand grip changes wrist comfort, elbow travel, or the final chest-level target.
- Close Grip Lat Pulldown uses a neutral attachment, making it useful when a handle feels stronger than the supinated bar because the wrist and elbow path are friendlier.
- Weighted Chin-Up gives bodyweight-pull comparison context, but added-weight chin-up math should stay separate from seated cable-machine resistance and thigh-pad setup.
- Strict Pull-Up contrasts full-body vertical pulling from a bar, which helps explain overhead control differences without converting reps into a cable-stack number.
- Seated Cable Row is a horizontal-pull contrast; use it to catch attempts that turn the pulldown into a low row or shorten the overhead start.
- Cable Biceps Curl isolates arm contribution, so it helps identify elbow-flexor bottlenecks while still rejecting curl-only pulldown reps.
Use these tools as comparison lenses. They can show whether nearby back or arm strength is ahead of Reverse Grip Lat Pulldown, but each calculator keeps its own setup, range, and scoring rules.