Endura

Chest-Supported Cable Row Strength Standards Calculator

Under strict Chest-Supported Cable Row strength standards, Novice starts around 0.38x bodyweight for men and 0.33x for women, while Elite starts around 0.90x for men and 0.76x for women.

Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Chest-Supported Cable Row is Novice, Intermediate, Advanced, or Elite for your bodyweight.

The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Chest-Supported Cable Row standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.

Understanding Your Chest-Supported Cable Row Strength Score

Your Chest-Supported Cable Row strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Chest-Supported Cable Row, valid Chest-Supported Cable Row reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.

This result is specific to Chest-Supported Cable Row. A counted rep should meet this standard: Set a rigid bench back pad at 45 degrees facing one floor-level cable. Lie prone with sternum through xiphoid continuously supported and feet planted symmetrically; Use a rigid neutral parallel-grip handle with hand centers 40 cm plus or minus 2 cm. Inline-measure working resistance at full reach; enter that measured attachment resistance, not stack mass; Begin with elbows fully extended and shoulders protracted under control. Row simultaneously until the handle contacts the underside of the bench/lower-sternum line, keeping elbows within 30 degrees of trunk; Return under control to full extension without lifting, sliding, or rebounding the chest. Count 1–12 reps; Chalk and wrist wraps allowed; straps/hooks and assistance prohibited. The score is not a general label for every nearby Horizontal pull exercise, and it should not be used for Bench angle other than 45 degrees; lost sternum-to-xiphoid support; trunk lift/rebound; unsupported seated/standing row; grip outside tolerance or non-neutral attachment; nominal stack weight; incomplete reach/contact; elbows over 30 degrees; asymmetric pull; straps/hooks; over 12 reps; assistance. Those variations may be useful training choices, but they answer a different standards question.

For example, a 200 lb male with a 143 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 114 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.

The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.

Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.

Chest-Supported Cable Row Strength Standards

Chest-Supported Cable Row standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.

The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the entered weight for strict Chest-Supported Cable Row, valid reps, and no substitutions from related lifts.

Men’s Chest-Supported Cable Row Strength Standards

BodyweightNoviceIntermediateAdvancedEliteStretch
120 lb46 lb63 lb86 lb108 lb+131 lb
130 lb49 lb68 lb93 lb117 lb+142 lb
140 lb53 lb73 lb100 lb126 lb+153 lb
150 lb57 lb78 lb107 lb135 lb+164 lb
160 lb61 lb84 lb114 lb144 lb+175 lb
170 lb65 lb89 lb121 lb154 lb+186 lb
180 lb68 lb94 lb128 lb163 lb+197 lb
190 lb72 lb99 lb135 lb172 lb+208 lb
200 lb76 lb105 lb143 lb181 lb+219 lb
210 lb80 lb110 lb150 lb190 lb+230 lb
220 lb84 lb115 lb157 lb199 lb+240 lb
230 lb87 lb120 lb164 lb208 lb+251 lb
240 lb91 lb126 lb171 lb217 lb+262 lb
250 lb95 lb131 lb178 lb226 lb+273 lb
260 lb99 lb136 lb185 lb235 lb+284 lb

Women’s Chest-Supported Cable Row Strength Standards

BodyweightNoviceIntermediateAdvancedEliteStretch
100 lb33 lb48 lb62 lb76 lb+90 lb
110 lb37 lb52 lb68 lb84 lb+99 lb
120 lb40 lb57 lb74 lb91 lb+108 lb
130 lb43 lb62 lb80 lb99 lb+117 lb
140 lb47 lb67 lb87 lb106 lb+126 lb
150 lb50 lb71 lb93 lb114 lb+135 lb
160 lb53 lb76 lb99 lb122 lb+144 lb
170 lb57 lb81 lb105 lb129 lb+154 lb
180 lb60 lb86 lb111 lb137 lb+163 lb
190 lb63 lb90 lb117 lb144 lb+172 lb
200 lb67 lb95 lb124 lb152 lb+181 lb
210 lb70 lb100 lb130 lb160 lb+190 lb
220 lb73 lb105 lb136 lb167 lb+199 lb

Men: Beginner is below 0.380x, Novice begins at 0.380x, Intermediate begins at 0.523x, Advanced begins at 0.713x, Elite begins at 0.903x, and Stretch is 1.093x bodyweight. Women: Beginner is below 0.333x, Novice begins at 0.333x, Intermediate begins at 0.475x, Advanced begins at 0.618x, Elite begins at 0.760x, and Stretch is 0.903x bodyweight.

At 200 lb bodyweight, a male lifter needs about 143 lb for Advanced and 181 lb for Elite. At 150 lb bodyweight, a female lifter needs about 93 lb for Advanced and 114 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.

How the Chest-Supported Cable Row Calculator Works

The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.

Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 143 lb estimated 1RM, the ratio is near 0.713x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.

Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Chest-Supported Cable Row and valid Chest-Supported Cable Row reps that meet the accepted rule.

Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.

The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Chest-Supported Cable Row question described here, using the same bodyweight-ratio logic as the rest of the standards system.

Elite Chest-Supported Cable Row Strength Levels

Elite Chest-Supported Cable Row strength starts at 0.903x bodyweight for men and 0.760x bodyweight for women. Stretch benchmarks are 1.093x for men and 0.903x for women, marking unusually strong results inside this standards system.

At 200 lb bodyweight, Elite begins around 181 lb for men. At 150 lb bodyweight, Elite begins around 114 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Chest-Supported Cable Row, valid Chest-Supported Cable Row reps, and the accepted rep.

Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Chest-Supported Cable Row.

Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.

Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.

Chest-Supported Cable Row Strength Compared to Other Lifts

Comparisons are useful because they explain why standards differ. Chest-Supported Cable Row sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.

Related movementComparison purposeWhat the gap can reveal
Seated Cable Rowclosest neighboring standardA higher Chest-Supported Cable Row score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates.
Lat Pulldownsame family contrastIf the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here.
Chest Supported Dumbbell Rowequipment contrastIf this score is far ahead, confirm the set did not drift into a disallowed variation.
Cable Reverse Flyrange and control comparisonThe comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different.
Face Pullheavier strength ceilingA similar tier can suggest balanced development, but it still does not make the two entries interchangeable.
Cable External Rotationtechnique transfer checkUse the gap to choose training work instead of forcing one result to predict the other.

If a related lift is much stronger, look for the one constraint unique to Chest-Supported Cable Row: range, support position, grip, bracing, or finish control. If Chest-Supported Cable Row is much stronger, confirm that the set did not become one of the disallowed variations.

Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.

The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.

Milestones in Chest-Supported Cable Row Strength

Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.

MilestoneExample targetWhy it mattersNext focus
First valid strict chest-supported cable row rep3 to 5 clean reps at a repeatable training weightShows the lifter can follow the accepted rule before a max testKeep setup identical across sets
Novice boundaryMen near 76 lb; women near 50 lbCreates a first bodyweight-ratio benchmarkBuild range and control
Intermediate boundaryMen near 105 lb; women near 71 lbShows the lift is no longer just familiarAddress the main limiter
Advanced boundaryMen near 143 lb; women near 93 lbMarks strong relative performance for this exerciseUse smaller jumps and more video review
Elite boundaryMen near 181 lb; women near 114 lbShows high-level strength in the exact standardProtect strict rep quality
Stretch benchmarkMen near 219 lb; women near 135 lbRepresents an unusually strong score in this calculatorRetest sparingly and recover well
Five-rep practice targetUse a set that estimates near 105 lb for a 200 lb male or 71 lb for a 150 lb femaleBuilds a cleaner estimate before a heavier testKeep every rep visually identical
Ten percent improvement targetMove a 105 lb estimate toward 115 lb, or a 71 lb estimate toward 78 lbGives a concrete block goal without requiring a new tierRetest only when the same rule survives

Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Chest-Supported Cable Row milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.

Related tools place Chest-Supported Cable Row inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.

  • Seated Cable Row is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Chest-Supported Cable Row. Compare it after a clean Chest-Supported Cable Row test to see whether this exact setup is the limiter.
  • Lat Pulldown gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
  • Chest Supported Dumbbell Row is useful when the current score feels surprising. Check it only after the Chest-Supported Cable Row reps are valid, then use the difference to choose assistance work.
  • Cable Reverse Fly can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
  • Face Pull helps frame broader strength without replacing the Chest-Supported Cable Row standard. If it is far ahead, audit the exact range and finish required here.

Use these tools after you have a valid Chest-Supported Cable Row result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.

Use Calculator