Tire Flip Strength Standards Calculator
Under strict Tire Flip loaded-distance standards, Novice starts around 1.25x bodyweight for men and 0.9x for women, while Elite starts around 3.2x for men and 2.4x for women over 20 meters.
Enter your sex, bodyweight, and tire weight to see whether your Tire Flip is Novice, Intermediate, Advanced, or Elite for your bodyweight.
The calculator divides tire weight by bodyweight, then compares that load-to-bodyweight ratio with the Tire Flip standards for your sex over 20 meters. This keeps the result focused on fixed-distance loaded strength instead of reps, estimated 1RM, time, or a different distance.
Understanding Your Score
Your Tire Flip score is the heaviest valid tire weight you can move for the full 20 meters course. The calculator uses a fixed-distance loaded-distance model: entered load divided by bodyweight, with both values normalized to the same unit before the tier lookup. The result keeps the entered load as the main snapshot value, then adds the load/bodyweight ratio so different body sizes can be compared against the same standards table.
Tire weight means the full tire weight used for the 20-meter flip course. For this page, enter the external load that matches the spec convention: total_implement_load. Do not enter estimated hand force, partial tire label, or a different tire model. The calculator does not ask for distance because the course is fixed at 20 meters; distance is a test condition, not a score input.
The tier rule is lower-inclusive. If a men’s Advanced boundary is 2.50x bodyweight, a 200 lb man reaches Advanced at exactly 500 lb tire weight. A lower number remains in the prior tier. The result also shows the current range, the next target load, and the remaining load gap so a standards label becomes a clear loading target.
| Result field | Meaning for Tire Flip | Why it matters |
|---|---|---|
| Tire weight | the full tire weight used for the 20-meter flip course. | Prevents wrong load accounting from changing the standards result. |
| Fixed distance | Exactly 20 meters for every scored attempt. | Keeps every result attached to the same loaded-distance test. |
| Load/bodyweight ratio | Tire weight divided by bodyweight. | Lets two lifters compare relative loaded-distance strength without hiding the entered load. |
| Tier | The highest sex-specific threshold your ratio reaches. | Shows where the result sits inside the approved standards model. |
| Current range | The ratio band that contains your result. | Explains whether the result barely reached a tier or is close to the next one. |
| Next target | The tire weight needed for the next lower-inclusive threshold. | Turns the next tier into a specific pounds or kilograms target. |
Example: a 200 lb male entering 430 lb tire weight scores 2.15x bodyweight. That clears the men’s Intermediate boundary of 1.80x and points toward the Advanced target at 500 lb. Example: a 150 lb female entering 278 lb tire weight reaches the women’s Advanced boundary at 1.85x bodyweight and sees the Elite target at 360 lb.
Because this is a standards calculator, setup details matter. The same tractor tire or fixed flip tire, same 20 meters lane, same surface, same start rule, and same finish rule should be used whenever results are compared. tire diameter, tread, course surface, flip rhythm, and finish line definition can all change the practical difficulty even when the load entry is the same.
Strength Standards
These Tire Flip standards are for one valid 20 meters test using tire weight. The ratio table is the scoring model. The target-load tables translate those ratios into practical loads at common bodyweights. Use the tables as a readable map, then use the calculator for the exact bodyweight and unit combination.
Tire Flip Ratio Standards – 20 meters, Tire weight
| Sex | Beginner | Novice | Intermediate | Advanced | Elite | Stretch benchmark |
|---|---|---|---|---|---|---|
| Men | Below 1.25x | 1.25x | 1.80x | 2.50x | 3.20x | 4.00x |
| Women | Below 0.90x | 0.90x | 1.30x | 1.85x | 2.40x | 3.00x |
Men – Target Tire weight Examples in Pounds
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 140 lb | 175 lb | 252 lb | 350 lb | 448 lb | 560 lb |
| 160 lb | 200 lb | 288 lb | 400 lb | 512 lb | 640 lb |
| 180 lb | 225 lb | 324 lb | 450 lb | 576 lb | 720 lb |
| 200 lb | 250 lb | 360 lb | 500 lb | 640 lb | 800 lb |
| 220 lb | 275 lb | 396 lb | 550 lb | 704 lb | 880 lb |
| 240 lb | 300 lb | 432 lb | 600 lb | 768 lb | 960 lb |
| 260 lb | 325 lb | 468 lb | 650 lb | 832 lb | 1040 lb |
Women – Target Tire weight Examples in Pounds
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 110 lb | 99 lb | 143 lb | 204 lb | 264 lb | 330 lb |
| 125 lb | 113 lb | 163 lb | 231 lb | 300 lb | 375 lb |
| 140 lb | 126 lb | 182 lb | 259 lb | 336 lb | 420 lb |
| 155 lb | 140 lb | 202 lb | 287 lb | 372 lb | 465 lb |
| 170 lb | 153 lb | 221 lb | 315 lb | 408 lb | 510 lb |
| 185 lb | 167 lb | 241 lb | 342 lb | 444 lb | 555 lb |
| 200 lb | 180 lb | 260 lb | 370 lb | 480 lb | 600 lb |
Metric Target Tire weight Examples
| Sex | Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|---|
| Men | 70 kg | 88 kg | 126 kg | 175 kg | 224 kg | 280 kg |
| Men | 80 kg | 100 kg | 144 kg | 200 kg | 256 kg | 320 kg |
| Men | 90 kg | 113 kg | 162 kg | 225 kg | 288 kg | 360 kg |
| Men | 100 kg | 125 kg | 180 kg | 250 kg | 320 kg | 400 kg |
| Women | 55 kg | 50 kg | 72 kg | 102 kg | 132 kg | 165 kg |
| Women | 65 kg | 59 kg | 85 kg | 120 kg | 156 kg | 195 kg |
| Women | 75 kg | 68 kg | 98 kg | 139 kg | 180 kg | 225 kg |
| Women | 85 kg | 77 kg | 111 kg | 157 kg | 204 kg | 255 kg |
The standards are intentionally tied to the named exercise. A tire flip result should not be swapped with another carry, push, drag, lunge, or flip just because the load is similar. The fixed-distance setup and load-entry rule are part of the test.
How the Calculator Works
The calculator collects sex, bodyweight, bodyweight unit, exercise, tire weight, and load unit. It does not collect a user-entered course length because every Tire Flip standards result uses 20 meters. It converts pounds and kilograms to a common basis, divides load by bodyweight, applies lower-inclusive tier boundaries, and returns the current tier plus the next target load.
| Input or output | How the calculator uses it | Tire Flip detail |
|---|---|---|
| Sex | Selects the sex-specific threshold table. | Men and women use separate lower-inclusive ratio boundaries. |
| Bodyweight | Denominator for load/bodyweight ratio and next-target math. | Bodyweight is not added to tire weight. |
| Bodyweight unit | Normalizes pounds or kilograms before ratio math. | Use the same bodyweight unit you normally track. |
| Exercise | Locks the result to the Tire Flip standards model. | The fixed distance remains 20 meters. |
| Tire weight | Numerator for the ratio and the primary result value. | Use the full tire weight used for the 20-meter flip course. |
| Load unit | Displays target and gap values in the selected unit. | The result can show pounds or kilograms without changing the tier. |
| Current range | Shows the lower and upper ratio band around the result. | Helpful when a result is close to the next target. |
| Next target | Multiplies the next threshold by bodyweight. | Higher valid load is stronger for this fixed-distance model. |
Boundary behavior is exact. A result equal to a threshold qualifies for that threshold. A result below the threshold remains in the previous tier. The reader-facing ratio is displayed with boundary-safe formatting so a result just below a tier does not appear to have crossed it.
Testing Rules
A valid Tire Flip result requires the same named exercise, same 20 meters distance, same load-entry rule, same lane or surface, and the same start and finish definitions. The test begins only when the athlete has the tractor tire or fixed flip tire moving under control and ends when the athlete and implement have crossed the full course under control.
| Rule area | Required Tire Flip standard | Why it matters |
|---|---|---|
| Setup | Use the same tractor tire or fixed flip tire, load accounting, footwear, and start line. | Changed setup can create a different standards result. |
| Lane and surface | Use the same lane, floor, turf, pavement, or platform when comparing results. | Surface friction and lane condition can change difficulty. |
| Distance | Complete exactly 20 meters for the scored result. | The calculator assumes a fixed-distance course. |
| Start | Begin from a controlled legal setup for tire flip. | The start must match the selected exercise, not a nearby variation. |
| Finish | Cross the finish under control with the implement still part of the attempt. | A controlled finish makes the load comparable. |
| Load entry | Enter Tire weight: the full tire weight used for the 20-meter flip course. | Wrong load accounting changes the ratio and tier. |
| Attempt status | Counts for this calculator | Does not count for this calculator |
|---|---|---|
| Valid | Same tractor tire or fixed flip tire, full 20 meters, correct tire weight, controlled start and finish. | Changed implement, changed lane, changed surface, or shortened course. |
| Valid | Small balance or gait adjustments while the attempt standard remains intact. | Drop, rest, restart, outside assistance, or route change. |
| Valid | Load recorded clearly in pounds or kilograms before entering the calculator. | Per-side entry, unclear loading, bodyweight-added entry, or a different exercise result. |
| Valid | Retest under the same setup so progress reflects more valid load. | Comparing a different setup as if it were the same tire flip standard. |
These rules are not meant to make testing complicated. They protect the meaning of the standards. A result can be useful in training notes while still being outside the Tire Flip calculator standard if the implement, lane, distance, load entry, or finish rule changed.
Elite Strength Levels
Elite Tire Flip strength means the athlete can move a high tire weight across the whole 20 meters course while preserving the same test definition. The load is not judged by absolute weight alone; it must reach the approved load/bodyweight boundary and still satisfy the setup, lane, start, finish, and validity rules.
| Sex | Elite begins at | Common bodyweight | Elite target | Stretch target | Audit focus |
|---|---|---|---|---|---|
| Men | 3.20x bodyweight | 200 lb | 640 lb tire weight | 800 lb tire weight | Same tractor tire or fixed flip tire, same lane, same finish control. |
| Men | 3.20x bodyweight | 90 kg | 288 kg tire weight | 360 kg tire weight | Load entry must match total_implement_load. |
| Women | 2.40x bodyweight | 155 lb | 372 lb tire weight | 465 lb tire weight | Full 20 meters course and controlled finish. |
| Women | 2.40x bodyweight | 70 kg | 168 kg tire weight | 210 kg tire weight | No outside help and no changed implement. |
The stretch benchmark is a high-end reference after Elite is already established. It does not create another tier. It simply gives a clear internal target for very strong results that already pass the Elite boundary under the same 20 meters test rules.
Milestones and Next Targets
Milestones make the Tire Flip standards useful between tiers. Because the model uses bodyweight-relative load, the next useful target is not the same absolute number for every athlete. It is the next threshold ratio multiplied by bodyweight, displayed as tire weight.
| Current result | Next men’s target | Next women’s target | What the target means | What to record before retesting |
|---|---|---|---|---|
| Beginner | 1.25x | 0.90x | First listed boundary for a valid 20 meters tire flip. | tractor tire or fixed flip tire, exact load, lane, surface, footwear, and finish rule. |
| Novice | 1.80x | 1.30x | Moves beyond basic completion into a stronger relative load. | Whether the same load-entry rule and setup were used. |
| Intermediate | 2.50x | 1.85x | Marks a heavier controlled result for the same fixed course. | Whether the attempt stayed continuous and finished under control. |
| Advanced | 3.20x | 2.40x | Reaches the Elite threshold for this standards model. | Video or notes showing the setup did not change. |
| Elite | 4.00x | 3.00x | Uses the stretch benchmark as the next internal target. | All setup variables, because small changes matter more at high loads. |
Next-Target Examples
| Example result | Current ratio | Current tier | Next target | Remaining load gap | |
|---|---|---|---|---|---|
| 200 lb male | 430 lb tire weight | 2.15 | Intermediate | 500 lb for Advanced | 70 lb |
| 200 lb male | 500 lb tire weight | 2.50 | Advanced | 640 lb for Elite | 140 lb |
| 150 lb female | 195 lb tire weight | 1.30 | Intermediate | 278 lb for Advanced | 83 lb |
| 150 lb female | 278 lb tire weight | 1.85 | Advanced | 360 lb for Elite | 82 lb |
| 90 kg male | 225 kg tire weight | 2.50 | Advanced | 288 kg for Elite | 63 kg |
| 70 kg female | 130 kg tire weight | 1.85 | Advanced | 168 kg for Elite | 38 kg |
These next-target examples show why the calculator keeps both the entered load and the ratio. The entered load is the performance snapshot. The ratio decides the tier. The gap number turns the next lower-inclusive boundary into a specific load target in the unit the athlete selected.
Related Tools
Related tools are useful only when they clarify the next comparison. The links below stay inside loaded-distance or close strength standards, but each one has its own load-entry rule and exercise boundary. Keep those boundaries separate when reading a result.
Yoke Walk
Use this live comparison anchor when you want a related standard without treating it as the same Tire Flip test. Yoke Walk has its own load-entry rule and setup, while Tire Flip uses tire weight over 20 meters. Check it when the question is about that exact implement or fixed-distance constraint rather than Tire Flip.
Sandbag Carry
Use this live comparison anchor when you want a related standard without treating it as the same Tire Flip test. Sandbag Carry has its own load-entry rule and setup, while Tire Flip uses tire weight over 20 meters. Check it when the question is about that exact implement or fixed-distance constraint rather than Tire Flip.
Frame Carry Strength Standards
Choose Frame Carry Strength Standards to compare Tire Flip with another fixed-distance test using loaded carry frame. It scores total frame load over 20 meters, so use that calculator separately instead of transferring this Tire Flip result.
Husafell Stone Carry Strength Standards
Try Husafell Stone Carry Strength Standards when you want to compare Tire Flip with another fixed-distance test using Husafell stone or stone replica. It scores stone load over 20 meters, so use that calculator separately instead of transferring this Tire Flip result.
Keg Carry Strength Standards
Open Keg Carry Strength Standards to compare Tire Flip with another fixed-distance test using loaded keg. It scores keg load over 20 meters, so use that calculator separately instead of transferring this Tire Flip result.