Endura

Single Arm Cable Overhead Triceps Extension Strength Standards Calculator

For Single Arm Cable Overhead Triceps Extension, Novice starts at 0.08x bodyweight for men and 0.05x for women, while Elite starts at 0.31x for men and 0.20x for women.

Use entered weight is the selected or weighted cable resistance for the one working handle and one arm at a time. Do not enter bodyweight, combined left-plus-right weight, another station's converted force, or a different implement's weight., count total valid reps across both arms combined, and keep every rep inside the same strict range and finish rule. Do not include Two-arm cable overhead triceps extension, Rope pushdown, Cable triceps kickback, Dumbbell triceps extension, or any set where the stronger side hides a weaker-side miss.

Run the calculator after a valid set to see the estimated 1RM ratio, current level, and next target. If the result feels surprising, check range, path, control, setup, grip, and side-to-side consistency before changing the exercise.

Understanding Your Single Arm Cable Overhead Triceps Extension Strength Score

Your Single Arm Cable Overhead Triceps Extension strength score is estimated 1RM divided by bodyweight. The calculator uses the weight from entered weight is the selected or weighted cable resistance for the one working handle and one arm at a time. Do not enter bodyweight, combined left-plus-right weight, another station’s converted force, or a different implement’s weight., total valid reps across both arms combined, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.

This result is specific to Cable Overhead Triceps Extension. A counted rep should extend the working elbow through a controlled overhead triceps-extension path without shoulder swinging, press-style lockouts, trunk lean, shortened range, or assistance. The score is not a general label for every nearby vertical push exercise, and it should not be used for Two-arm cable overhead triceps extension, Rope pushdown, Cable triceps kickback, Dumbbell triceps extension, Skull crusher, Close-grip press, Partial elbow extensions, Shoulder-swing reps, Assisted reps. Those variations may be useful training choices, but they answer a different standards question.

For example, a 200 lb male with a 44 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 30 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.

The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.

Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same side rule, same range, same support position, and same rep quality were used again.

Single Arm Cable Overhead Triceps Extension Strength Standards

Single Arm Cable Overhead Triceps Extension standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.

The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume entered weight is the selected or weighted cable resistance for the one working handle and one arm at a time. Do not enter bodyweight, combined left-plus-right weight, another station’s converted force, or a different implement’s weight., valid reps, and no substitutions from related lifts.

Men’s Single Arm Cable Overhead Triceps Extension Strength Standards

BodyweightNoviceIntermediateAdvancedEliteStretch
120 lb10 lb17 lb26 lb37 lb+48 lb
130 lb10 lb18 lb29 lb40 lb+52 lb
140 lb11 lb20 lb31 lb43 lb+56 lb
150 lb12 lb21 lb33 lb47 lb+60 lb
160 lb13 lb22 lb35 lb50 lb+64 lb
170 lb14 lb24 lb37 lb53 lb+68 lb
180 lb14 lb25 lb40 lb56 lb+72 lb
190 lb15 lb27 lb42 lb59 lb+76 lb
200 lb16 lb28 lb44 lb62 lb+80 lb
210 lb17 lb29 lb46 lb65 lb+84 lb
220 lb18 lb31 lb48 lb68 lb+88 lb
230 lb18 lb32 lb51 lb71 lb+92 lb
240 lb19 lb34 lb53 lb74 lb+96 lb
250 lb20 lb35 lb55 lb78 lb+100 lb
260 lb21 lb36 lb57 lb81 lb+104 lb

Women’s Single Arm Cable Overhead Triceps Extension Strength Standards

BodyweightNoviceIntermediateAdvancedEliteStretch
100 lb5 lb9 lb14 lb20 lb+27 lb
110 lb6 lb9 lb15 lb22 lb+30 lb
120 lb6 lb10 lb17 lb24 lb+32 lb
130 lb7 lb11 lb18 lb26 lb+35 lb
140 lb7 lb12 lb20 lb28 lb+38 lb
150 lb8 lb13 lb21 lb30 lb+41 lb
160 lb8 lb14 lb22 lb32 lb+43 lb
170 lb9 lb14 lb24 lb34 lb+46 lb
180 lb9 lb15 lb25 lb36 lb+49 lb
190 lb10 lb16 lb27 lb38 lb+51 lb
200 lb10 lb17 lb28 lb40 lb+54 lb
210 lb11 lb18 lb29 lb42 lb+57 lb
220 lb11 lb19 lb31 lb44 lb+59 lb

Men: Beginner is below 0.080x, Novice begins at 0.080x, Intermediate begins at 0.140x, Advanced begins at 0.220x, Elite begins at 0.310x, and Stretch is 0.400x bodyweight. Women: Beginner is below 0.050x, Novice begins at 0.050x, Intermediate begins at 0.085x, Advanced begins at 0.140x, Elite begins at 0.200x, and Stretch is 0.270x bodyweight.

At 200 lb bodyweight, a male lifter needs about 44 lb for Advanced and 62 lb for Elite. At 150 lb bodyweight, a female lifter needs about 21 lb for Advanced and 30 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.

How the Single Arm Cable Overhead Triceps Extension Calculator Works

The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.

Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 44 lb estimated 1RM, the ratio is near 0.220x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.

Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses entered weight is the selected or weighted cable resistance for the one working handle and one arm at a time. Do not enter bodyweight, combined left-plus-right weight, another station’s converted force, or a different implement’s weight. and total valid reps across both arms combined that meet the accepted rule.

Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.

The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Single Arm Cable Overhead Triceps Extension question described here, using the same bodyweight-ratio logic as the rest of the standards system.

Elite Single Arm Cable Overhead Triceps Extension Strength Levels

Elite Single Arm Cable Overhead Triceps Extension strength starts at 0.310x bodyweight for men and 0.200x bodyweight for women. Stretch benchmarks are 0.400x for men and 0.270x for women, marking unusually strong results inside this standards system.

At 200 lb bodyweight, Elite begins around 62 lb for men. At 150 lb bodyweight, Elite begins around 30 lb for women. Those numbers are impressive only when the entry still reflects entered weight is the selected or weighted cable resistance for the one working handle and one arm at a time. Do not enter bodyweight, combined left-plus-right weight, another station’s converted force, or a different implement’s weight., total valid reps across both arms combined, and the accepted rep.

Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Cable Overhead Triceps Extension.

Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.

Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.

Single Arm Cable Overhead Triceps Extension Strength Compared to Other Lifts

Comparisons are useful because they explain why standards differ. Single Arm Cable Overhead Triceps Extension sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator. A press, row, raise, squat, curl, extension, or dumbbell benchmark may look close on the training plan while measuring a different joint angle or support problem.

Related movementComparison purposeWhat the gap can reveal
Cable Overhead Triceps Extensionclosest neighboring standardA higher Cable Overhead Triceps Extension score can show skill in this exact stance, shoulder position, and range, while a lower score points to the constraint this calculator isolates.
Dumbbell Triceps Extensionsame family contrastIf the related lift is far ahead, the limiting factor is often depth, trunk brace, grip security, or strict finish quality here.
Cable Skull Crusherequipment and grip contrastIf this score is far ahead, confirm the set did not drift into a disallowed variation with a different path, hip position, or lockout rule.
Swiss Bar Skull Crusherrange, depth, and shoulder-control comparisonThe comparison is useful because the bodyweight-ratio math is shared while the accepted rep uses different range, support, and tempo demands.
Machine Triceps Extensionheavier strength ceiling with different stance demandsA similar result can suggest balanced development, but the stance, shoulder angle, grip, and finish still keep the entries separate.
Cable Lying Triceps Extensiontechnique transfer check for trunk and hip controlUse the gap to choose training work for the first visible breakdown: depth, path, trunk control, shoulder stability, or weaker-side range.

If a related lift is much stronger, look for the one constraint unique to Cable Overhead Triceps Extension: range, support position, grip, bracing, or finish control. If Cable Overhead Triceps Extension is much stronger, confirm that the set did not become one of the disallowed variations.

The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.

Milestones in Single Arm Cable Overhead Triceps Extension Strength

Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.

MilestoneExample targetWhy it mattersNext focus
First valid strict single arm cable overhead triceps extension rep3 to 5 clean reps at a repeatable training weightShows the lifter can follow the accepted rule before a max testKeep setup identical across sets
Novice boundaryMen near 16 lb; women near 8 lbCreates a first bodyweight-ratio benchmarkBuild range and control
Intermediate boundaryMen near 28 lb; women near 13 lbShows the lift is no longer just familiarAddress the main limiter
Advanced boundaryMen near 44 lb; women near 21 lbMarks strong relative performance for this exerciseUse smaller jumps and more video review
Elite boundaryMen near 62 lb; women near 30 lbShows high-level strength in the exact standardProtect strict rep quality
Stretch benchmarkMen near 80 lb; women near 41 lbRepresents an unusually strong score in this calculatorRetest sparingly and recover well
Five-rep practice targetUse a set that estimates near 28 lb for a 200 lb male or 13 lb for a 150 lb femaleBuilds a cleaner estimate before a heavier testKeep every rep visually identical
Ten percent improvement targetMove a 28 lb estimate toward 31 lb, or a 13 lb estimate toward 14 lbGives a concrete block goal without requiring a new tierRetest only when the same rule survives

Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Single Arm Cable Overhead Triceps Extension milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.

Related tools place Single Arm Cable Overhead Triceps Extension inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.

  • Cable Overhead Triceps Extension is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Single Arm Cable Overhead Triceps Extension. Compare it after a clean Cable Overhead Triceps Extension test to see whether this exact setup is the limiter.
  • Dumbbell Triceps Extension gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
  • Cable Skull Crusher is useful when the current score feels surprising. Check it only after the Cable Overhead Triceps Extension reps are valid, then use the difference to choose assistance work.
  • Swiss Bar Skull Crusher can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
  • Machine Triceps Extension helps frame broader strength without replacing the Single Arm Cable Overhead Triceps Extension standard. If it is far ahead, audit the exact range and finish required here.
  • Cable Lying Triceps Extension offers a technique-transfer check. Similar tiers suggest balanced development, while different tiers can reveal where the path, support, or rep count breaks down.
  • Tricep Rope Pushdown belongs in the comparison set because the name may sound close while the accepted rep is not identical. Use the tool as context, not as a replacement entry.
  • Single Dumbbell Seated Triceps Extensions gives another bodyweight-ratio lens for the same training neighborhood. The most useful note is why the gap exists: range, depth, path, bracing, or control.

Use these tools after you have a valid Cable Overhead Triceps Extension result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.

FAQ

What is a good Single Arm Cable Overhead Triceps Extension score?

A good score depends on sex, bodyweight, and valid rep quality. Intermediate means the lifter has moved past basic familiarity with Cable Overhead Triceps Extension. Advanced means the result is strong for bodyweight. Elite means the lifter is showing high relative strength in this specific exercise. Use the exact calculator result rather than one absolute weight.

What should I enter in the calculator?

Enter sex, bodyweight, total valid reps across both arms combined, and the working weight for entered weight is the selected or weighted cable resistance for the one working handle and one arm at a time. Do not enter bodyweight, combined left-plus-right weight, another station’s converted force, or a different implement’s weight.. Keep bodyweight and working weight in the same unit family. Do not enter a number from another exercise, an uneven left-right total that hides invalid reps, or a plate-only note unless this exact tool defines that entry. The entry should match a valid set, because the tier threshold is only meaningful when the rep standard matches the calculator.

Can I enter a related exercise if it feels close?

No. Related lifts are useful for context and comparison, but they are not entries for this calculator. Two-arm cable overhead triceps extension, Rope pushdown, Cable triceps kickback, Dumbbell triceps extension, Skull crusher, Close-grip press, Partial elbow extensions, Shoulder-swing reps, Assisted reps change the strength demand enough to distort the ratio. Use the matching calculator for the movement you actually performed, then compare tiers only after both results use valid reps.

Do multi-rep sets work for this standard?

Yes, as long as every counted rep follows the same rule. The calculator estimates 1RM from the entered reps, then divides by bodyweight. Lower-rep sets usually give a cleaner estimate than long sets where range, path, or control changes under fatigue.

Should I use pounds or kilograms?

Either unit works. Enter bodyweight and working weight in the same unit family shown by the calculator. The tier is based on a ratio, so a correct kilogram entry and a correct pound entry produce the same classification.

Why is my Single Arm Cable Overhead Triceps Extension lower than a related lift?

That is often normal. This tool includes constraints that nearby lifts may not share, such as range, support, path, grip, depth, or finish control. A lower ratio can reveal the exact quality the exercise is meant to train. Compare the gap with the standards table before changing the exercise, because the difference may be a valid weakness rather than a bad score.

When should I reject a result?

Reject the result when the setup changes, assistance appears, range shortens, control disappears, or the rep becomes Two-arm cable overhead triceps extension, Rope pushdown, Cable triceps kickback, Dumbbell triceps extension, Skull crusher, Close-grip press, Partial elbow extensions, Shoulder-swing reps, Assisted reps. The calculator is most useful when it reflects the strict version of the exercise, not the heaviest neighboring movement.

How often should I retest?

Retest every four to eight weeks for most training blocks, or after a clear technical improvement. Testing too often can reward short-term risk more than durable strength. Use practice sets between tests to make the accepted rep more automatic.

Use Calculator