Log Clean And Jerk Strength Standards Calculator
Compare your Log Clean And Jerk strength with Endura's strength standards for men and women at your bodyweight. A useful benchmark for a good one-rep max is our Intermediate standard: approximately 145 lb at 190 lb for a man and 76 lb at 150 lb for a woman.
How does your best lift compare? Enter your bodyweight, the total barbell weight, including the bar, plates, and collars, and the reps you completed below. The calculator estimates your one-rep max and shows your strength level for your bodyweight. Use the exercise-specific approved repetition convention.
The calculator compares that estimated one-rep max with the Log Clean And Jerk standards for your sex at your bodyweight. It preserves the calculator's existing equations, thresholds, and input meanings; the benchmark is a comparison target, not a working-set prescription.
Understanding Your Log Clean And Jerk Strength Score
Your Log Clean And Jerk strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Log Clean And Jerk, valid Log Clean And Jerk reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.
This result is specific to Log Clean And Jerk. A counted rep should meet this standard: Clean the log to a stable rack, then dip and drive it overhead using a valid jerk receiving style, and recover to standing. A valid finish requires the log controlled overhead with elbows locked, hips and knees extended, and feet stable after recovery. The score is not a general label for every nearby vertical push exercise, and it should not be used for Log Push Press from rack only, Log Strict Press, Log Clean only, Barbell Clean And Jerk, Axle Clean And Press, Viking Press, Partial clean, Unstable overhead saves, Any variation where bodyweight-only ability, per-side weight, cable-stack weight, machine weight, implement weight, or combined weight is entered under the wrong convention. Those variations may be useful training choices, but they answer a different standards question.
For example, a 200 lb male with a 202 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 139 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.
The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.
Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.
Log Clean And Jerk Strength Standards
Log Clean And Jerk standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.
The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the entered weight for strict Log Clean And Jerk, valid reps, and no substitutions from related lifts.
Men’s Log Clean And Jerk Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 120 lb | 66 lb | 91 lb | 121 lb | 154 lb+ | 181 lb |
| 130 lb | 71 lb | 99 lb | 131 lb | 166 lb+ | 196 lb |
| 140 lb | 77 lb | 106 lb | 141 lb | 179 lb+ | 211 lb |
| 150 lb | 82 lb | 114 lb | 152 lb | 192 lb+ | 226 lb |
| 160 lb | 88 lb | 122 lb | 162 lb | 205 lb+ | 241 lb |
| 170 lb | 93 lb | 129 lb | 172 lb | 218 lb+ | 256 lb |
| 180 lb | 99 lb | 137 lb | 182 lb | 230 lb+ | 271 lb |
| 190 lb | 104 lb | 144 lb | 192 lb | 243 lb+ | 286 lb |
| 200 lb | 110 lb | 152 lb | 202 lb | 256 lb+ | 301 lb |
| 210 lb | 115 lb | 160 lb | 212 lb | 269 lb+ | 316 lb |
| 220 lb | 121 lb | 167 lb | 222 lb | 282 lb+ | 332 lb |
| 230 lb | 126 lb | 175 lb | 232 lb | 294 lb+ | 347 lb |
| 240 lb | 132 lb | 182 lb | 242 lb | 307 lb+ | 362 lb |
| 250 lb | 137 lb | 190 lb | 253 lb | 320 lb+ | 377 lb |
| 260 lb | 142 lb | 198 lb | 263 lb | 333 lb+ | 392 lb |
Women’s Log Clean And Jerk Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 100 lb | 35 lb | 51 lb | 71 lb | 93 lb+ | 111 lb |
| 110 lb | 38 lb | 56 lb | 78 lb | 102 lb+ | 122 lb |
| 120 lb | 42 lb | 61 lb | 85 lb | 111 lb+ | 134 lb |
| 130 lb | 45 lb | 66 lb | 92 lb | 120 lb+ | 145 lb |
| 140 lb | 49 lb | 71 lb | 99 lb | 130 lb+ | 156 lb |
| 150 lb | 52 lb | 76 lb | 106 lb | 139 lb+ | 167 lb |
| 160 lb | 56 lb | 81 lb | 113 lb | 148 lb+ | 178 lb |
| 170 lb | 59 lb | 86 lb | 120 lb | 157 lb+ | 189 lb |
| 180 lb | 63 lb | 91 lb | 127 lb | 167 lb+ | 200 lb |
| 190 lb | 66 lb | 96 lb | 135 lb | 176 lb+ | 211 lb |
| 200 lb | 70 lb | 101 lb | 142 lb | 185 lb+ | 223 lb |
| 210 lb | 73 lb | 106 lb | 149 lb | 194 lb+ | 234 lb |
| 220 lb | 77 lb | 111 lb | 156 lb | 204 lb+ | 245 lb |
Men: Beginner is below 0.548x, Novice begins at 0.548x, Intermediate begins at 0.760x, Advanced begins at 1.010x, Elite begins at 1.280x, and Stretch is 1.507x bodyweight. Women: Beginner is below 0.348x, Novice begins at 0.348x, Intermediate begins at 0.505x, Advanced begins at 0.708x, Elite begins at 0.925x, and Stretch is 1.113x bodyweight.
At 200 lb bodyweight, a male lifter needs about 202 lb for Advanced and 256 lb for Elite. At 150 lb bodyweight, a female lifter needs about 106 lb for Advanced and 139 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.
How the Log Clean And Jerk Calculator Works
The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.
Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 202 lb estimated 1RM, the ratio is near 1.010x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.
Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Log Clean And Jerk and valid Log Clean And Jerk reps that meet the accepted rule.
Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.
The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Log Clean And Jerk question described here, using the same bodyweight-ratio logic as the rest of the standards system.
Elite Log Clean And Jerk Strength Levels
Elite Log Clean And Jerk strength starts at 1.280x bodyweight for men and 0.925x bodyweight for women. Stretch benchmarks are 1.507x for men and 1.113x for women, marking unusually strong results inside this standards system.
At 200 lb bodyweight, Elite begins around 256 lb for men. At 150 lb bodyweight, Elite begins around 139 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Log Clean And Jerk, valid Log Clean And Jerk reps, and the accepted rep.
Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Log Clean And Jerk.
Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.
Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.
At the elite boundary, the useful question is whether the lift is repeatable under the same rule, not whether one heavier attempt can be explained afterward. Keep the same setup, load convention, and counted-rep standard when comparing future tests to this result.
Log Clean And Jerk Strength Compared to Other Lifts
Comparisons are useful because they explain why standards differ. Log Clean And Jerk sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.
| Related movement | Comparison purpose | What the gap can reveal |
|---|---|---|
| Standing Log Overhead Press | closest neighboring standard | A higher Log Clean And Jerk score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates. |
| Log Split Jerk | same family contrast | If the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here. |
| Log Push Press | equipment contrast | If this score is far ahead, confirm the set did not drift into a disallowed variation. |
| Barbell Clean And Jerk | range and control comparison | The comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different. |
| Barbell Clean And Press | heavier strength ceiling | A similar tier can suggest balanced development, but it still does not make the two entries interchangeable. |
| Log Strict Press | technique transfer check | Use the gap to choose training work instead of forcing one result to predict the other. |
If a related lift is much stronger, look for the one constraint unique to Log Clean And Jerk: range, support position, grip, bracing, or finish control. If Log Clean And Jerk is much stronger, confirm that the set did not become one of the disallowed variations.
Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.
The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.
Milestones in Log Clean And Jerk Strength
Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.
| Milestone | Example target | Why it matters | Next focus |
|---|---|---|---|
| First valid strict log clean and jerk rep | 3 to 5 clean reps at a repeatable training weight | Shows the lifter can follow the accepted rule before a max test | Keep setup identical across sets |
| Novice boundary | Men near 110 lb; women near 52 lb | Creates a first bodyweight-ratio benchmark | Build range and control |
| Intermediate boundary | Men near 152 lb; women near 76 lb | Shows the lift is no longer just familiar | Address the main limiter |
| Advanced boundary | Men near 202 lb; women near 106 lb | Marks strong relative performance for this exercise | Use smaller jumps and more video review |
| Elite boundary | Men near 256 lb; women near 139 lb | Shows high-level strength in the exact standard | Protect strict rep quality |
| Stretch benchmark | Men near 301 lb; women near 167 lb | Represents an unusually strong score in this calculator | Retest sparingly and recover well |
| Five-rep practice target | Use a set that estimates near 152 lb for a 200 lb male or 76 lb for a 150 lb female | Builds a cleaner estimate before a heavier test | Keep every rep visually identical |
| Ten percent improvement target | Move a 152 lb estimate toward 167 lb, or a 76 lb estimate toward 83 lb | Gives a concrete block goal without requiring a new tier | Retest only when the same rule survives |
Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Log Clean And Jerk milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.
Related Strength Standards Tools
Related tools place Log Clean And Jerk inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.
- Standing Log Overhead Press is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Log Clean And Jerk. Compare it after a clean Log Clean And Jerk test to see whether this exact setup is the limiter.
- Log Split Jerk gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
- Log Push Press is useful when the current score feels surprising. Check it only after the Log Clean And Jerk reps are valid, then use the difference to choose assistance work.
- Barbell Clean And Jerk can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
- Barbell Clean And Press helps frame broader strength without replacing the Log Clean And Jerk standard. If it is far ahead, audit the exact range and finish required here.
- Log Strict Press offers a technique-transfer check. Similar tiers suggest balanced development, while different tiers can reveal where the path, support, or rep count breaks down.
- Machine Shoulder Press belongs in the comparison set because the name may sound close while the accepted rep is not identical. Use the tool as context, not as a replacement entry.
- Barbell Power Clean gives another bodyweight-ratio lens for the same training neighborhood. The most useful note is why the gap exists: range, depth, path, bracing, or control.
Use these tools after you have a valid Log Clean And Jerk result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.