Endura

Landmine Squat Strength Standards Calculator

Under strict Landmine Squat strength standards, Novice starts around 0.58x bodyweight for men and 0.46x for women, while Elite starts around 1.4x for men and 1.1x for women.

Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Landmine Squat is Novice, Intermediate, Advanced, or Elite for your bodyweight.

The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Landmine Squat standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.

Understanding Your Landmine Squat Strength Score

Your Landmine Squat strength score is your Estimated 1RM divided by bodyweight, using the total loaded free-end landmine load as the tested load. It ranks how much strict two-hand front-loaded squat strength you can show while controlling an anchored angled bar path.

The key number is a bodyweight ratio, not a full-barbell squat comparison. A 200 lb lifter with a 216 lb Landmine Squat Estimated 1RM has a 1.08 ratio, which reaches Advanced for men. That does not mean the lifter has a 216 lb front squat or back squat; it means the anchored free-end load cleared the Advanced Landmine Squat line.

A valid score requires one end of the bar fixed in a landmine base or secure corner, both hands holding the loaded free end at the upper chest or handle, consistent squat depth, and a full standing lockout. Pressing the sleeve, leaning bodyweight into the bar, cutting depth, or turning the rep into a landmine thruster changes the test.

Read the result as strict front-loaded landmine squat strength: the number is useful only when the same anchor, handle, stance, depth, and free-end loading rule survive the whole set.

Landmine Squat Strength Standards

Landmine Squat strength standards convert your Estimated 1RM-to-bodyweight ratio into Beginner, Novice, Intermediate, Advanced, Elite, and Stretch targets. Use the table for your sex, find the closest bodyweight row, then compare your Estimated 1RM with the listed free-end load targets.

These tables use total loaded free-end landmine load. The standards sit above strict goblet squat expectations because the bar is anchored, but below front squat, back squat, machine hack squat, and leg press strength because the load is not a full free-bar or machine-supported squat equivalent.

Men's Landmine Squat Strength Standards

Bodyweight Beginner Novice Intermediate Advanced Elite Stretch
120 lb Under 82 lb 82–114 lb 115–151 lb 152–190 lb 191–220 lb 221 lb+
130 lb Under 86 lb 86–120 lb 121–159 lb 160–200 lb 201–232 lb 233 lb+
140 lb Under 91 lb 91–126 lb 127–167 lb 168–210 lb 211–244 lb 245 lb+
150 lb Under 95 lb 95–132 lb 133–175 lb 176–220 lb 221–255 lb 256 lb+
160 lb Under 99 lb 99–138 lb 139–183 lb 184–230 lb 231–267 lb 268 lb+
170 lb Under 103 lb 103–144 lb 145–190 lb 191–239 lb 240–278 lb 279 lb+
180 lb Under 107 lb 107–149 lb 150–198 lb 199–249 lb 250–288 lb 289 lb+
190 lb Under 111 lb 111–155 lb 156–205 lb 206–258 lb 259–299 lb 300 lb+
200 lb Under 115 lb 115–160 lb 161–212 lb 213–267 lb 268–309 lb 310 lb+
210 lb Under 119 lb 119–166 lb 167–219 lb 220–276 lb 277–320 lb 321 lb+
220 lb Under 122 lb 122–171 lb 172–226 lb 227–285 lb 286–330 lb 331 lb+
230 lb Under 126 lb 126–176 lb 177–233 lb 234–293 lb 294–340 lb 341 lb+
240 lb Under 130 lb 130–181 lb 182–240 lb 241–302 lb 303–350 lb 351 lb+
250 lb Under 133 lb 133–186 lb 187–246 lb 247–310 lb 311–359 lb 360 lb+
260 lb Under 137 lb 137–191 lb 192–253 lb 254–318 lb 319–369 lb 370 lb+

Women's Landmine Squat Strength Standards

Bodyweight Beginner Novice Intermediate Advanced Elite Stretch
100 lb Under 53 lb 53–75 lb 76–100 lb 101–128 lb 129–150 lb 151 lb+
110 lb Under 57 lb 57–80 lb 81–107 lb 108–136 lb 137–160 lb 161 lb+
120 lb Under 60 lb 60–85 lb 86–114 lb 115–145 lb 146–170 lb 171 lb+
130 lb Under 64 lb 64–90 lb 91–120 lb 121–153 lb 154–179 lb 180 lb+
140 lb Under 67 lb 67–95 lb 96–126 lb 127–160 lb 161–188 lb 189 lb+
150 lb Under 70 lb 70–99 lb 100–132 lb 133–168 lb 169–197 lb 198 lb+
160 lb Under 73 lb 73–103 lb 104–138 lb 139–175 lb 176–206 lb 207 lb+
170 lb Under 76 lb 76–108 lb 109–144 lb 145–183 lb 184–214 lb 215 lb+
180 lb Under 79 lb 79–112 lb 113–149 lb 150–190 lb 191–223 lb 224 lb+
190 lb Under 82 lb 82–116 lb 117–155 lb 156–197 lb 198–231 lb 232 lb+
200 lb Under 85 lb 85–120 lb 121–160 lb 161–204 lb 205–239 lb 240 lb+
210 lb Under 88 lb 88–124 lb 125–165 lb 166–210 lb 211–247 lb 248 lb+
220 lb Under 90 lb 90–128 lb 129–171 lb 172–217 lb 218–255 lb 256 lb+

How the Landmine Squat Calculator Works

The Landmine Squat calculator estimates 1RM from your entered free-end load and reps, divides that estimate by bodyweight, then compares the ratio with sex-specific standards. It does not adjust for handle style, anchor height, stance width, age, or how much of the bar sleeve weight you choose to count.

Estimated 1RM is the tool’s strength estimate for the set. Ratio is Estimated 1RM divided by bodyweight. If a 200 lb male enters a 216 lb one-rep Landmine Squat, the ratio is 216 / 200 = 1.08, which is Advanced because the Advanced boundary is lower-inclusive.

The calculator only answers the Landmine Squat question when the load entry matches the movement: total loaded free-end landmine load, not per-side plates, not the full barbell weight from a back squat, and not a machine or leg press result.

Use the same loading convention every time. If you include a handle or part of the sleeve weight in one test, include it the same way in future tests so the snapshot change reflects strength rather than bookkeeping.

Elite Landmine Squat Strength Levels

Elite Landmine Squat strength means reaching the Elite target for your sex and exact bodyweight. The target rises with bodyweight without increasing pound-for-pound, so use the calculator for your exact Elite and Stretch targets.

For a 200 lb male, Elite starts around 272 lb Estimated 1RM and Stretch is 316 lb. For a 150 lb woman, Elite starts around 168 lb Estimated 1RM and Stretch is 198 lb.

An Elite result should still look like a squat: the bar stays close to the upper chest or handle, the lifter reaches consistent depth, and the rep finishes with full hip and knee extension. Sleeve-supported leaning, quarter-depth reps, or a push-press finish can move more load without proving Elite Landmine Squat strength.

Treat Elite as a controlled relative-strength line, not a license to turn the landmine into a different implement or movement.

Landmine Squat Strength Compared to Other Lifts

Landmine Squat strength is best compared with nearby squat patterns, but it should not be merged with front squat, back squat, machine hack squat, leg press, or goblet squat standards. The angled anchored bar changes loading, balance, and limiting factors.

Movement Typical Relationship What The Gap Reveals
Goblet Squat Often lower than Landmine Squat A large gap can show how much the anchor reduces grip and rack-position limits.
Front Squat Usually higher as a full free-bar benchmark A weak front squat relative to landmine work can point to rack position, bracing, or full-bar balance limits.
Back Squat Usually higher as a broad squat benchmark The comparison shows why free-end landmine load cannot be treated as full-barbell squat load.
Machine Hack Squat Usually higher because support is greater Large machine numbers may reflect external support rather than standing landmine control.
Leg Press Usually much higher The sled removes standing balance, upper-body support, and sleeve control.

If a 200 lb male has a 216 lb Landmine Squat Estimated 1RM and a much higher leg press, the difference is not a contradiction. The landmine test includes free-end control, trunk bracing, and standing lockout under an angled bar path.

Use comparisons to diagnose constraints, not to convert one lift into another.

Milestones in Landmine Squat Strength

Landmine Squat milestones are bodyweight-ratio targets that show when your Estimated 1RM moves from Novice toward Intermediate, Advanced, Elite, and Stretch-level strength. Each milestone should preserve the same free-end load rule and strict squat execution.

Men’s Milestone Ratio 200 lb Target
Intermediate 0.82x bodyweight 164 lb Estimated 1RM
Advanced 1.08x bodyweight 216 lb Estimated 1RM
Elite 1.36x bodyweight 272 lb Estimated 1RM+
Stretch Benchmark 1.58x bodyweight 316 lb Estimated 1RM
Women’s Milestone Ratio 150 lb Target
Intermediate 0.66x bodyweight 99 lb Estimated 1RM
Advanced 0.88x bodyweight 132 lb Estimated 1RM
Elite 1.12x bodyweight 168 lb Estimated 1RM+
Stretch Benchmark 1.32x bodyweight 198 lb Estimated 1RM

Your next Landmine Squat milestone is the first strength-level target above your current result for your sex and exact bodyweight. Use the calculator to see the precise estimated one-rep-max gap to that target.

Use milestones as retest targets only when the next load can be reached without shortening depth, pressing the sleeve, or changing the setup.

Use these tools to compare Landmine Squat with closely related movements, implements, and strength demands. Each calculator keeps its own movement and scoring rules.

Related tool Why it is related How it differs
Goblet Squat (Raw) Compare Goblet Squat (Raw) with Landmine Squat as a closely related strength standard. Goblet Squat (Raw) uses its own movement, implement, and scoring rules.
Barbell Front Squat (Raw) Compare Barbell Front Squat (Raw) with Landmine Squat as a closely related strength standard. Barbell Front Squat (Raw) uses its own movement, implement, and scoring rules.
Barbell Back Squat (High-Bar, Full Depth) Compare Barbell Back Squat (High-Bar, Full Depth) with Landmine Squat as a closely related strength standard. Barbell Back Squat (High-Bar, Full Depth) uses its own movement, implement, and scoring rules.
Machine Hack Squat Compare Machine Hack Squat with Landmine Squat as a closely related strength standard. Machine Hack Squat uses its own movement, implement, and scoring rules.
Barbell Hack Squat Compare Barbell Hack Squat with Landmine Squat as a closely related strength standard. Barbell Hack Squat uses its own movement, implement, and scoring rules.

Use Calculator