Landmine Press to Bradford Press Conversion Calculator
This Landmine Press to Bradford Press Conversion calculator estimates Bradford Press Conversion strength from Landmine Press performance.
Enter your sex, bodyweight, and Landmine Press performance to see your Bradford Press Conversion estimate, expected range, strength tier, and ratio to bodyweight.
The calculator uses the conversion model for this tool to translate Landmine Press performance into the Bradford Press Conversion estimate. Use the result as a planning estimate, not a guaranteed max or attempt recommendation.
What Your Landmine Press Result Means for Bradford Press
This calculator turns one strict Landmine Press result into a predicted Bradford Press 1RM. The result gives you a center estimate, a planning range, and a strength level for the Bradford Press only.
| Example | Landmine Press result | Estimated Landmine Press max | Predicted Bradford Press | Expected range | Target level |
|---|---|---|---|---|---|
| 190 lb male | 45 lb total loaded free-end landmine load used by one arm at a time × 8 | 56 lb | 63 lb | 61–68 lb | Intermediate |
| 150 lb female | 25 lb total loaded free-end landmine load used by one arm at a time × 8 | 31 lb | 33 lb | 32–36 lb | Novice |
For the male example, 45 lb total loaded free-end landmine load used by one arm at a time × 8 predicts 63 lb with a 61–68 lb range. The Intermediate label rates the predicted Bradford Press result; it does not rate the Landmine Press result.
How the Landmine Press to Bradford Press Conversion Works
The calculator keeps the source and target measurement rules separate: the source entry is total loaded free-end landmine load used by one arm at a time, while the target result is total barbell load.
| Step | What the calculator does | Worked example |
|---|---|---|
| 1. Read the source load | Use total loaded free-end landmine load used by one arm at a time exactly as entered. | 45 lb total loaded free-end landmine load used by one arm at a time × 8 |
| 2. Estimate the source max | Convert the completed set into an estimated source 1RM using the calculator’s approved repetition rule. | 56 lb |
| 3. Map to the target result | Apply the Landmine Press-to-Bradford Press mapping (0.889 center coefficient for this male example). | 63 lb |
| 4. Show uncertainty | Calculate the lower and upper ends of the expected transfer range. | 61–68 lb |
| 5. Rate the target | Classify the unrounded center against Bradford Press standards. | Intermediate |
The conversion matches reviewed strength levels for these two exercises. It does not claim that their loads, repetitions, equipment, or execution are interchangeable—or that the center is guaranteed.
Landmine Press to Bradford Press Conversion Chart
This chart holds the source set at 5 strict reps. Every value is generated by the same calculation as the calculator.
| Landmine Press result | male estimate | male range | female estimate | female range |
|---|---|---|---|---|
| 20 lb total loaded free-end landmine load used by one arm at a time × 5 | 25 lb | 25–28 lb | 24 lb | 23–26 lb |
| 30 lb total loaded free-end landmine load used by one arm at a time × 5 | 38 lb | 37–41 lb | 36 lb | 35–39 lb |
| 45 lb total loaded free-end landmine load used by one arm at a time × 5 | 57 lb | 55–62 lb | 54 lb | 53–59 lb |
| 70 lb total loaded free-end landmine load used by one arm at a time × 5 | 89 lb | 86–96 lb | 84 lb | 82–92 lb |
| 90 lb total loaded free-end landmine load used by one arm at a time × 5 | 114 lb | 111–124 lb | 108 lb | 105–118 lb |
| 100 lb total loaded free-end landmine load used by one arm at a time × 5 | 127 lb | 123–138 lb | 120 lb | 117–131 lb |
The range reflects transfer uncertainty. Use the center to compare or plan, and use direct Bradford Press performance to learn your actual result.
Bradford Press Strength Standards
The calculator rates only the predicted Bradford Press result. These reference standards use the same bodyweights and sex profiles as the examples above.
| Bradford Press level | 190 lb male: total barbell load | 150 lb female: total barbell load |
|---|---|---|
| Beginner | Below 42 lb | Below 22 lb |
| Novice | 42–60 lb | 22–33 lb |
| Intermediate | 61–85 lb | 34–48 lb |
| Advanced | 86–110 lb | 49–63 lb |
| Elite | 111 lb or more | 64 lb or more |
| Stretch benchmark | 133 lb | 78 lb |
The live calculator resolves the target standard for the bodyweight entered. The source exercise keeps its own separate standards.
Key Differences Between Landmine Press and Bradford Press
These exercises share relevant strength demands, but the differences below are why their raw numbers cannot be interchanged.
| Difference | Landmine Press | Bradford Press | Why it affects the estimate |
|---|---|---|---|
| Movement and setup | Landmine Press: strict one-arm angled landmine press from shoulder/chest height to controlled lockout. | Bradford Press: strict Bradford Press. | The starting position and movement path determine the leverage and muscles that can contribute to a valid repetition. |
| Equipment and recorded resistance | The total weighted free-end landmine load used by one arm at a time, not per-side plate load and not a full-barbell overhead press load. | Total barbell load, not per-side plate load, overhead-press max, push-press load, machine-stack load, or dumbbell load. | The equipment and the way resistance is recorded make the displayed numbers unsuitable for direct substitution. |
| Primary performance demands | angled pressing force, shoulder and upper-chest strength, triceps lockout | the stated exercise setup and action, repeatable full-range execution, stable positioning | A different mix of force, stability, mobility, and repetition endurance can move actual target performance away from the estimate. |
| Valid repetition standard | Each rep begins with the free end of the anchored bar controlled at the working-side shoulder or upper chest, upper body braced, and feet or kneeling stance stable. | Each counted cycle begins with the barbell controlled at the front shoulder/clavicle area. The bar moves from front shoulder position over the head to a controlled behind-neck position, then returns over the head to the front shoulder position. | A set only belongs in the conversion when it follows the source test, and the prediction only represents the stated target test. |
Getting and Using a Useful Landmine Press-to-Bradford Press Estimate
Source test: Each rep begins with the free end of the anchored bar controlled at the working-side shoulder or upper chest, upper body braced, and feet or kneeling stance stable. The working arm presses the free end forward and upward along the landmine arc to full elbow extension without leg drive.
Target represented: Each counted cycle begins with the barbell controlled at the front shoulder/clavicle area. The bar moves from front shoulder position over the head to a controlled behind-neck position, then returns over the head to the front shoulder position. A valid rep finishes when the bar returns to the front shoulder position under control after passing behind the neck.
| Before calculating | What to do |
|---|---|
| Use a valid Landmine Press set | Each rep begins with the free end of the anchored bar controlled at the working-side shoulder or upper chest, upper body braced, and feet or kneeling stance stable. |
| Use 1 to 10 strict repetitions | Enter one whole-number Landmine Press set inside the calculator’s approved repetition range. |
| Keep the measurement convention straight | Enter total loaded free-end landmine load used by one arm at a time. Read the target as total barbell load. |
| Use the range for planning | Start Bradford Press practice near the conservative end and use the center as the main comparison point. |
| Retest under the same conditions | Keep the Landmine Press setup, range, way of recording resistance, and repetition standard consistent. |
Do not substitute Bradford Press results entered as Landmine Press results, Landmine Press repetitions performed with a changed setup or range, partial-range, assisted, or momentum-driven Landmine Press repetitions, source resistance recorded under a different convention than total loaded free-end landmine load used by one arm at a time, multiple sets combined into one repetition total. Those are different tests, so their numbers do not belong in this conversion.
| Result component | How to use it |
|---|---|
| Predicted center | Use it as the main comparison point for the Landmine Press-to-Bradford Press estimate. |
| Low end of range | Use it as the conservative reference when beginning or resuming Bradford Press practice. |
| High end of range | Treat it as possible context—not a guaranteed result or attempt recommendation. |
| Bradford Press strength level | Use it only to understand where the predicted result falls against Bradford Press standards. |
| Direct Bradford Press result | Replace the prediction with the actual result once Bradford Press has been performed under the stated test. |
Example: 45 lb total loaded free-end landmine load used by one arm at a time × 8 predicts 63 lb with a 61–68 lb range. Use 63 lb as the comparison point, treat 61 lb as the conservative edge, and do not interpret 68 lb as a recommended attempt. Once you record a strict Bradford Press result, use that direct result instead.
Related Landmine Press and Bradford Press Tools
Use a direct standards tool when you have performed the exercise itself. Use neighboring tools to answer a different question—not to overwrite this conversion.