Endura

Deficit Deadlift vs Barbell Rack Pull Strength Standards

Compare your deficit deadlift and barbell rack pull against strength standards for your sex and bodyweight. Enter one recent set of 1–12 reps for each lift to see your estimated one-rep maxes, strength levels, next targets, and which lift you should prioritize.

Enter the canonical working weight and a whole number of strict repetitions for each exercise. Pounds and kilograms can be mixed. Use a conventional-stance straight-bar deadlift from a stable 1 to 3 inch deficit, beginning dead stop on the floor and finishing at full lockout and a strapless below-knee rack pull from motionless pins to full hip-and-knee lockout. You can enter either lift in pounds or kilograms. Each lift is compared with its own standards, so the heavier lift is not automatically the stronger one.

Deficit Deadlift vs Barbell Rack Pull Strength Standards by Bodyweight

Use these tables to compare the estimated one-rep max required for the deficit deadlift and barbell rack pull to reach the same strength level at each listed bodyweight. They show the targets used by the calculator—not a required difference between your deficit deadlift and barbell rack pull.

Choose the men’s or women’s table, find your bodyweight or the closest listed row, then read across to Novice, Intermediate, Advanced, or Elite. Every entry shows Deficit Deadlift / Barbell Rack Pull, with pounds first and kilograms underneath. For a result based on your exact bodyweight and recent sets, use the calculator above; you do not need to test either true one-rep max.

Men’s Deficit Deadlift vs Barbell Rack Pull Standards

How to read the table: The first number is Deficit Deadlift; the second is Barbell Rack Pull. Each number is the lowest estimated one-rep max needed to reach that strength level. Scroll horizontally on smaller screens.

BodyweightNoviceIntermediateAdvancedElite
120 lb
54.4 kg
231 / 280 lb
104.8 / 127 kg
294 / 356 lb
133.4 / 161.5 kg
343 / 413 lb
155.6 / 187.3 kg
385 / 469 lb
174.6 / 212.7 kg
130 lb
59 kg
244 / 295 lb
110.7 / 133.8 kg
310 / 376 lb
140.6 / 170.6 kg
362 / 436 lb
164.2 / 197.8 kg
406 / 495 lb
184.2 / 224.5 kg
140 lb
63.5 kg
256 / 310 lb
116.1 / 140.6 kg
326 / 395 lb
147.9 / 179.2 kg
380 / 458 lb
172.4 / 207.7 kg
427 / 520 lb
193.7 / 235.9 kg
150 lb
68 kg
268 / 325 lb
121.6 / 147.4 kg
341 / 413 lb
154.7 / 187.3 kg
398 / 479 lb
180.5 / 217.3 kg
447 / 544 lb
202.8 / 246.8 kg
160 lb
72.6 kg
280 / 339 lb
127 / 153.8 kg
356 / 432 lb
161.5 / 196 kg
416 / 500 lb
188.7 / 226.8 kg
466 / 568 lb
211.4 / 257.6 kg
170 lb
77.1 kg
292 / 353 lb
132.4 / 160.1 kg
370 / 449 lb
167.8 / 203.7 kg
433 / 521 lb
196.4 / 236.3 kg
486 / 591 lb
220.4 / 268.1 kg
180 lb
81.6 kg
303 / 367 lb
137.4 / 166.5 kg
385 / 467 lb
174.6 / 211.8 kg
450 / 541 lb
204.1 / 245.4 kg
504 / 614 lb
228.6 / 278.5 kg
190 lb
86.2 kg
314 / 380 lb
142.4 / 172.4 kg
399 / 484 lb
181 / 219.5 kg
466 / 561 lb
211.4 / 254.5 kg
523 / 637 lb
237.2 / 288.9 kg
200 lb
90.7 kg
325 / 393 lb
147.4 / 178.3 kg
413 / 501 lb
187.3 / 227.2 kg
482 / 581 lb
218.6 / 263.5 kg
541 / 659 lb
245.4 / 298.9 kg
210 lb
95.3 kg
336 / 406 lb
152.4 / 184.2 kg
427 / 517 lb
193.7 / 234.5 kg
498 / 600 lb
225.9 / 272.2 kg
559 / 681 lb
253.6 / 308.9 kg
220 lb
99.8 kg
346 / 419 lb
156.9 / 190.1 kg
440 / 534 lb
199.6 / 242.2 kg
514 / 619 lb
233.1 / 280.8 kg
577 / 702 lb
261.7 / 318.4 kg
230 lb
104.3 kg
357 / 432 lb
161.9 / 196 kg
453 / 550 lb
205.5 / 249.5 kg
529 / 637 lb
240 / 288.9 kg
594 / 724 lb
269.4 / 328.4 kg
240 lb
108.9 kg
367 / 444 lb
166.5 / 201.4 kg
466 / 566 lb
211.4 / 256.7 kg
545 / 656 lb
247.2 / 297.6 kg
611 / 744 lb
277.1 / 337.5 kg
250 lb
113.4 kg
377 / 456 lb
171 / 206.8 kg
479 / 581 lb
217.3 / 263.5 kg
560 / 674 lb
254 / 305.7 kg
628 / 765 lb
284.9 / 347 kg
260 lb
117.9 kg
387 / 468 lb
175.5 / 212.3 kg
492 / 597 lb
223.2 / 270.8 kg
574 / 691 lb
260.4 / 313.4 kg
645 / 785 lb
292.6 / 356.1 kg
270 lb
122.5 kg
397 / 480 lb
180.1 / 217.7 kg
504 / 612 lb
228.6 / 277.6 kg
589 / 709 lb
267.2 / 321.6 kg
661 / 805 lb
299.8 / 365.1 kg
280 lb
127 kg
407 / 492 lb
184.6 / 223.2 kg
517 / 627 lb
234.5 / 284.4 kg
603 / 726 lb
273.5 / 329.3 kg
677 / 825 lb
307.1 / 374.2 kg
290 lb
131.5 kg
416 / 504 lb
188.7 / 228.6 kg
529 / 642 lb
240 / 291.2 kg
618 / 744 lb
280.3 / 337.5 kg
693 / 844 lb
314.3 / 382.8 kg
300 lb
136.1 kg
426 / 515 lb
193.2 / 233.6 kg
541 / 656 lb
245.4 / 297.6 kg
632 / 761 lb
286.7 / 345.2 kg
709 / 864 lb
321.6 / 391.9 kg

Women’s Deficit Deadlift vs Barbell Rack Pull Standards

How to read the table: The first number is Deficit Deadlift; the second is Barbell Rack Pull. Each number is the lowest estimated one-rep max needed to reach that strength level. Scroll horizontally on smaller screens.

BodyweightNoviceIntermediateAdvancedElite
100 lb
45.4 kg
135 / 166 lb
61.2 / 75.3 kg
183 / 224 lb
83 / 101.6 kg
217 / 269 lb
98.4 / 122 kg
246 / 309 lb
111.6 / 140.2 kg
110 lb
49.9 kg
144 / 177 lb
65.3 / 80.3 kg
195 / 238 lb
88.5 / 108 kg
232 / 287 lb
105.2 / 130.2 kg
263 / 329 lb
119.3 / 149.2 kg
120 lb
54.4 kg
153 / 188 lb
69.4 / 85.3 kg
207 / 252 lb
93.9 / 114.3 kg
246 / 304 lb
111.6 / 137.9 kg
278 / 349 lb
126.1 / 158.3 kg
130 lb
59 kg
161 / 198 lb
73 / 89.8 kg
218 / 266 lb
98.9 / 120.7 kg
259 / 321 lb
117.5 / 145.6 kg
294 / 368 lb
133.4 / 166.9 kg
140 lb
63.5 kg
169 / 208 lb
76.7 / 94.3 kg
229 / 280 lb
103.9 / 127 kg
272 / 337 lb
123.4 / 152.9 kg
308 / 387 lb
139.7 / 175.5 kg
150 lb
68 kg
177 / 218 lb
80.3 / 98.9 kg
240 / 293 lb
108.9 / 132.9 kg
285 / 353 lb
129.3 / 160.1 kg
323 / 405 lb
146.5 / 183.7 kg
160 lb
72.6 kg
185 / 228 lb
83.9 / 103.4 kg
251 / 306 lb
113.9 / 138.8 kg
298 / 369 lb
135.2 / 167.4 kg
337 / 423 lb
152.9 / 191.9 kg
170 lb
77.1 kg
192 / 237 lb
87.1 / 107.5 kg
261 / 318 lb
118.4 / 144.2 kg
310 / 384 lb
140.6 / 174.2 kg
351 / 440 lb
159.2 / 199.6 kg
180 lb
81.6 kg
200 / 246 lb
90.7 / 111.6 kg
271 / 331 lb
122.9 / 150.1 kg
322 / 399 lb
146.1 / 181 kg
365 / 457 lb
165.6 / 207.3 kg
190 lb
86.2 kg
207 / 255 lb
93.9 / 115.7 kg
281 / 343 lb
127.5 / 155.6 kg
334 / 413 lb
151.5 / 187.3 kg
378 / 474 lb
171.5 / 215 kg
200 lb
90.7 kg
214 / 264 lb
97.1 / 119.7 kg
291 / 355 lb
132 / 161 kg
345 / 428 lb
156.5 / 194.1 kg
391 / 491 lb
177.4 / 222.7 kg
210 lb
95.3 kg
222 / 273 lb
100.7 / 123.8 kg
300 / 367 lb
136.1 / 166.5 kg
357 / 442 lb
161.9 / 200.5 kg
404 / 507 lb
183.3 / 230 kg
220 lb
99.8 kg
228 / 281 lb
103.4 / 127.5 kg
310 / 378 lb
140.6 / 171.5 kg
368 / 456 lb
166.9 / 206.8 kg
417 / 523 lb
189.1 / 237.2 kg
230 lb
104.3 kg
235 / 290 lb
106.6 / 131.5 kg
319 / 390 lb
144.7 / 176.9 kg
379 / 469 lb
171.9 / 212.7 kg
429 / 539 lb
194.6 / 244.5 kg
240 lb
108.9 kg
242 / 298 lb
109.8 / 135.2 kg
328 / 401 lb
148.8 / 181.9 kg
390 / 483 lb
176.9 / 219.1 kg
442 / 554 lb
200.5 / 251.3 kg

How Your Deficit Deadlift vs Barbell Rack Pull Result Is Calculated

The calculator estimates each max, rates it against the standards for that exercise and bodyweight, then compares the two ratings. Here is the complete process.

1. Estimate a one-rep max from each set

For one rep, it uses the weight entered. For 2–12 reps, it runs both formulas and keeps the lower, less aggressive estimate.

  • Epley: weight × (1 + reps ÷ 30)
  • Brzycki: weight × 36 ÷ (37 − reps)

A published back-squat study supports estimated-max prediction under its study conditions. It does not independently validate every exercise or population used by this comparison. Estimates are more dependable from clean, difficult, lower-rep sets. See the Back-squat formula validation study and Published discussion of back-squat one-rep-max prediction research.

2. Find the deficit deadlift strength level

The deficit deadlift standards use the sex-specific strength levels from the individual Deficit Deadlift tool. Targets begin at 190 lb for men and 150 lb for women, then adjust to your exact bodyweight: reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so heavier lifters are expected to lift more total weight without requiring strength to increase pound for pound.

3. Find the barbell rack pull strength level

The standards use the sex-specific strength levels from the individual Barbell Rack Pull tool. Targets begin at 190 lb for men and 150 lb for women, then adjust to your exact bodyweight: reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so heavier lifters are expected to pull more total barbell weight without requiring strength to increase pound for pound.

4. Compare the two results

Each max receives a level from Beginner through Elite. The lower-level lift is the priority. If the levels match, a priority appears only when one lift is at least 10 points farther from its next level. Otherwise, the result is Balanced.

The result shows which lift ranks lower, not why. Technique, fatigue, training history, and set quality can affect it. Age range is recorded anonymously but does not change the standards.

StageWhat happens
Estimate each maxUse the entered weight for 1 rep; for 2–12 reps, keep the lower formula result.
Rate the deficit deadliftAdjust deficit deadlift targets to exact bodyweight with the two-thirds rule.
Rate the barbell rack pullAdjust barbell rack pull targets to exact bodyweight with the two-thirds rule.
Compare different levelsName the lower-level lift as the priority.
Compare matching levelsUse Balanced unless the difference in progress toward the next level reaches 10 points.

Use the calculator above to see both estimated maxes, strength levels, the priority or Balanced result, and both next-level targets.

How Men’s Deficit Deadlift and Barbell Rack Pull Standards Differ

How to read both charts: Choose a strength level, find bodyweight along the bottom, and follow that level’s line. Zero means the two standards are equal. Above zero means the barbell rack pull standard is higher; below zero means the deficit deadlift standard is higher. On a phone, swipe the chart left and right to inspect the full-size lines and labels. The tables provide the exact pounds and kilograms.

What the men’s data shows:

Novice closest match120 lb

The standards come closest at 120 lb.

Barbell Rack Pull target is higher4 strength levels

Novice, Intermediate, Advanced, and Elite at every displayed bodyweight.

Elite difference84 → 155 lb

38.1 → 70.3 kg from 120 to 300 lb bodyweight.

How men’s deficit deadlift and barbell rack pull standards differ by bodyweightFour colored lines show the difference in pounds between the barbell rack pull and deficit deadlift standards at Novice, Intermediate, Advanced, and Elite. Zero means the two standards are equal. Above zero means the barbell rack pull standard is higher. Below zero means the deficit deadlift standard is higher.NoviceIntermediateAdvancedElite0+50+100+150+200120140160180200220240260280300Bodyweight (lb)Difference between standards (lb)

How to read the table: Every number is the barbell rack pull standard minus the deficit deadlift standard. A plus sign means the barbell rack pull standard is higher. A minus sign means the deficit deadlift standard is higher.

BodyweightNoviceIntermediateAdvancedElite
120 lb
54.4 kg
+49 lb
+22.2 kg
+62 lb
+28.1 kg
+70 lb
+31.7 kg
+84 lb
+38.1 kg
130 lb
59 kg
+51 lb
+23.1 kg
+66 lb
+30 kg
+74 lb
+33.6 kg
+89 lb
+40.3 kg
140 lb
63.5 kg
+54 lb
+24.5 kg
+69 lb
+31.3 kg
+78 lb
+35.3 kg
+93 lb
+42.2 kg
150 lb
68 kg
+57 lb
+25.8 kg
+72 lb
+32.6 kg
+81 lb
+36.8 kg
+97 lb
+44 kg
160 lb
72.6 kg
+59 lb
+26.8 kg
+76 lb
+34.5 kg
+84 lb
+38.1 kg
+102 lb
+46.2 kg
170 lb
77.1 kg
+61 lb
+27.7 kg
+79 lb
+35.9 kg
+88 lb
+39.9 kg
+105 lb
+47.7 kg
180 lb
81.6 kg
+64 lb
+29.1 kg
+82 lb
+37.2 kg
+91 lb
+41.3 kg
+110 lb
+49.9 kg
190 lb
86.2 kg
+66 lb
+30 kg
+85 lb
+38.5 kg
+95 lb
+43.1 kg
+114 lb
+51.7 kg
200 lb
90.7 kg
+68 lb
+30.9 kg
+88 lb
+39.9 kg
+99 lb
+44.9 kg
+118 lb
+53.5 kg
210 lb
95.3 kg
+70 lb
+31.8 kg
+90 lb
+40.8 kg
+102 lb
+46.3 kg
+122 lb
+55.3 kg
220 lb
99.8 kg
+73 lb
+33.2 kg
+94 lb
+42.6 kg
+105 lb
+47.7 kg
+125 lb
+56.7 kg
230 lb
104.3 kg
+75 lb
+34.1 kg
+97 lb
+44 kg
+108 lb
+48.9 kg
+130 lb
+59 kg
240 lb
108.9 kg
+77 lb
+34.9 kg
+100 lb
+45.3 kg
+111 lb
+50.4 kg
+133 lb
+60.4 kg
250 lb
113.4 kg
+79 lb
+35.8 kg
+102 lb
+46.2 kg
+114 lb
+51.7 kg
+137 lb
+62.1 kg
260 lb
117.9 kg
+81 lb
+36.8 kg
+105 lb
+47.6 kg
+117 lb
+53 kg
+140 lb
+63.5 kg
270 lb
122.5 kg
+83 lb
+37.6 kg
+108 lb
+49 kg
+120 lb
+54.4 kg
+144 lb
+65.3 kg
280 lb
127 kg
+85 lb
+38.6 kg
+110 lb
+49.9 kg
+123 lb
+55.8 kg
+148 lb
+67.1 kg
290 lb
131.5 kg
+88 lb
+39.9 kg
+113 lb
+51.2 kg
+126 lb
+57.2 kg
+151 lb
+68.5 kg
300 lb
136.1 kg
+89 lb
+40.4 kg
+115 lb
+52.2 kg
+129 lb
+58.5 kg
+155 lb
+70.3 kg

How Women’s Deficit Deadlift and Barbell Rack Pull Standards Differ

What the women’s data shows:

Novice closest match100 lb

The standards come closest at 100 lb.

Barbell Rack Pull target is higher4 strength levels

Novice, Intermediate, Advanced, and Elite at every displayed bodyweight.

Elite difference63 → 112 lb

28.6 → 50.8 kg from 100 to 240 lb bodyweight.

How women’s deficit deadlift and barbell rack pull standards differ by bodyweightFour colored lines show the difference in pounds between the barbell rack pull and deficit deadlift standards at Novice, Intermediate, Advanced, and Elite. Zero means the two standards are equal. Above zero means the barbell rack pull standard is higher. Below zero means the deficit deadlift standard is higher.NoviceIntermediateAdvancedElite0+50+100+150100120140160180200220240Bodyweight (lb)Difference between standards (lb)

How to read the table: Every number is the barbell rack pull standard minus the deficit deadlift standard. A plus sign means the barbell rack pull standard is higher. A minus sign means the deficit deadlift standard is higher.

BodyweightNoviceIntermediateAdvancedElite
100 lb
45.4 kg
+31 lb
+14.1 kg
+41 lb
+18.6 kg
+52 lb
+23.6 kg
+63 lb
+28.6 kg
110 lb
49.9 kg
+33 lb
+15 kg
+43 lb
+19.5 kg
+55 lb
+25 kg
+66 lb
+29.9 kg
120 lb
54.4 kg
+35 lb
+15.9 kg
+45 lb
+20.4 kg
+58 lb
+26.3 kg
+71 lb
+32.2 kg
130 lb
59 kg
+37 lb
+16.8 kg
+48 lb
+21.8 kg
+62 lb
+28.1 kg
+74 lb
+33.5 kg
140 lb
63.5 kg
+39 lb
+17.6 kg
+51 lb
+23.1 kg
+65 lb
+29.5 kg
+79 lb
+35.8 kg
150 lb
68 kg
+41 lb
+18.6 kg
+53 lb
+24 kg
+68 lb
+30.8 kg
+82 lb
+37.2 kg
160 lb
72.6 kg
+43 lb
+19.5 kg
+55 lb
+24.9 kg
+71 lb
+32.2 kg
+86 lb
+39 kg
170 lb
77.1 kg
+45 lb
+20.4 kg
+57 lb
+25.8 kg
+74 lb
+33.6 kg
+89 lb
+40.4 kg
180 lb
81.6 kg
+46 lb
+20.9 kg
+60 lb
+27.2 kg
+77 lb
+34.9 kg
+92 lb
+41.7 kg
190 lb
86.2 kg
+48 lb
+21.8 kg
+62 lb
+28.1 kg
+79 lb
+35.8 kg
+96 lb
+43.5 kg
200 lb
90.7 kg
+50 lb
+22.6 kg
+64 lb
+29 kg
+83 lb
+37.6 kg
+100 lb
+45.3 kg
210 lb
95.3 kg
+51 lb
+23.1 kg
+67 lb
+30.4 kg
+85 lb
+38.6 kg
+103 lb
+46.7 kg
220 lb
99.8 kg
+53 lb
+24.1 kg
+68 lb
+30.9 kg
+88 lb
+39.9 kg
+106 lb
+48.1 kg
230 lb
104.3 kg
+55 lb
+24.9 kg
+71 lb
+32.2 kg
+90 lb
+40.8 kg
+110 lb
+49.9 kg
240 lb
108.9 kg
+56 lb
+25.4 kg
+73 lb
+33.1 kg
+93 lb
+42.2 kg
+112 lb
+50.8 kg

Deficit Deadlift and Barbell Rack Pull Exercises Used by This Calculator

This calculator uses a conventional-stance barbell deficit deadlift and a strict below-knee barbell rack pull. Use strict canonical Deficit Deadlift and Barbell Rack Pull tests. Do not mix variations, assistance, partial range, momentum, or different load conventions.

Use a stable 1 to 3 inch deficit and a dead-stop floor start

Stand on the same stable 1 to 3 inch platform for the full test. Use a straight bar, conventional stance, and total barbell weight. Begin each repetition with the bar motionless on the floor and finish at full standing lockout. Do not enter a conventional floor deadlift, sumo deadlift, rack pull, block pull, trap-bar deadlift, Romanian deadlift, strapped pull, bounced repetition, or touch-and-go set.

Start motionless from below-knee pins

Enter total barbell weight including the bar. Start every rep motionless on below-knee rack pins, keep the bar close, and finish at full hip-and-knee lockout before resetting under control. Do not use high pins, blocks, straps, bounce, hitching, thigh ramping, segmented lockout, supportive suits, or lockout-only overloads.

Enter one recent Deficit Deadlift result and one recent Barbell Rack Pull result

Enter the canonical working weight and a whole number of strict repetitions for each exercise. Pounds and kilograms can be mixed.

  • Deficit Deadlift — View the individual Deficit Deadlift standards and next strength-level target.
  • Barbell Rack Pull — View the individual Barbell Rack Pull standards and next strength-level target.
  • Barbell Deadlift — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
  • Barbell Sumo Deadlift — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
  • Romanian Deadlift — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
  • Barbell Stiff-Leg Deadlift — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
Use Calculator