Endura

Chest Supported Row vs Barbell Reverse Grip Bent Over Row Strength Standards

Compare your chest supported row and barbell reverse grip bent over row against strength standards for your sex and bodyweight. Enter one recent set of 1–12 reps for each lift to see your estimated one-rep maxes, strength levels, next targets, and which lift you should prioritize.

Use each exercise's canonical input: Displayed or total loaded machine resistance for Chest Supported Row and Weight used for Barbell Reverse Grip Bent Over Row. Use a bilateral chest-supported machine or T-bar row with the torso fully supported, full arm extension, lower-chest or upper-abdomen finish, and controlled return and the entered weight for strict Barbell Reverse Grip Bent Over Row. You can enter either lift in pounds or kilograms. Each lift is compared with its own standards, so the heavier lift is not automatically the stronger one.

Chest Supported Row vs Barbell Reverse Grip Bent Over Row Strength Standards by Bodyweight

Use these tables to compare the estimated one-rep max required for the chest supported row and barbell reverse grip bent over row to reach the same strength level at each listed bodyweight. They show the targets used by the calculator—not a required difference between your chest supported row and barbell reverse grip bent over row.

Choose the men’s or women’s table, find your bodyweight or the closest listed row, then read across to Novice, Intermediate, Advanced, or Elite. Every entry shows Chest Supported Row / Barbell Reverse Grip Bent Over Row, with pounds first and kilograms underneath. For a result based on your exact bodyweight and recent sets, use the calculator above; you do not need to test either true one-rep max.

Men’s Chest Supported Row vs Barbell Reverse Grip Bent Over Row Standards

How to read the table: The first number is Chest Supported Row; the second is Barbell Reverse Grip Bent Over Row. Each number is the lowest estimated one-rep max needed to reach that strength level. Scroll horizontally on smaller screens.

BodyweightNoviceIntermediateAdvancedElite
120 lb
54.4 kg
77 / 73 lb
34.9 / 33.1 kg
104 / 104 lb
47.2 / 47.2 kg
140 / 140 lb
63.5 / 63.5 kg
179 / 177 lb
81.2 / 80.3 kg
130 lb
59 kg
82 / 77 lb
37.2 / 34.9 kg
109 / 109 lb
49.4 / 49.4 kg
148 / 148 lb
67.1 / 67.1 kg
189 / 187 lb
85.7 / 84.8 kg
140 lb
63.5 kg
86 / 81 lb
39 / 36.7 kg
115 / 115 lb
52.2 / 52.2 kg
155 / 155 lb
70.3 / 70.3 kg
198 / 197 lb
89.8 / 89.4 kg
150 lb
68 kg
90 / 85 lb
40.8 / 38.6 kg
120 / 120 lb
54.4 / 54.4 kg
162 / 162 lb
73.5 / 73.5 kg
208 / 206 lb
94.3 / 93.4 kg
160 lb
72.6 kg
94 / 88 lb
42.6 / 39.9 kg
126 / 126 lb
57.2 / 57.2 kg
169 / 169 lb
76.7 / 76.7 kg
217 / 215 lb
98.4 / 97.5 kg
170 lb
77.1 kg
97 / 92 lb
44 / 41.7 kg
131 / 131 lb
59.4 / 59.4 kg
176 / 176 lb
79.8 / 79.8 kg
226 / 224 lb
102.5 / 101.6 kg
180 lb
81.6 kg
101 / 95 lb
45.8 / 43.1 kg
136 / 136 lb
61.7 / 61.7 kg
183 / 183 lb
83 / 83 kg
234 / 232 lb
106.1 / 105.2 kg
190 lb
86.2 kg
105 / 99 lb
47.6 / 44.9 kg
141 / 141 lb
64 / 64 kg
190 / 190 lb
86.2 / 86.2 kg
243 / 241 lb
110.2 / 109.3 kg
200 lb
90.7 kg
109 / 102 lb
49.4 / 46.3 kg
146 / 146 lb
66.2 / 66.2 kg
197 / 197 lb
89.4 / 89.4 kg
251 / 249 lb
113.9 / 112.9 kg
210 lb
95.3 kg
112 / 106 lb
50.8 / 48.1 kg
151 / 151 lb
68.5 / 68.5 kg
203 / 203 lb
92.1 / 92.1 kg
260 / 258 lb
117.9 / 117 kg
220 lb
99.8 kg
116 / 109 lb
52.6 / 49.4 kg
155 / 155 lb
70.3 / 70.3 kg
210 / 210 lb
95.3 / 95.3 kg
268 / 266 lb
121.6 / 120.7 kg
230 lb
104.3 kg
119 / 112 lb
54 / 50.8 kg
160 / 160 lb
72.6 / 72.6 kg
216 / 216 lb
98 / 98 kg
276 / 274 lb
125.2 / 124.3 kg
240 lb
108.9 kg
123 / 116 lb
55.8 / 52.6 kg
165 / 165 lb
74.8 / 74.8 kg
222 / 222 lb
100.7 / 100.7 kg
284 / 282 lb
128.8 / 127.9 kg
250 lb
113.4 kg
126 / 119 lb
57.2 / 54 kg
169 / 169 lb
76.7 / 76.7 kg
228 / 228 lb
103.4 / 103.4 kg
292 / 289 lb
132.4 / 131.1 kg
260 lb
117.9 kg
129 / 122 lb
58.5 / 55.3 kg
174 / 174 lb
78.9 / 78.9 kg
234 / 234 lb
106.1 / 106.1 kg
300 / 297 lb
136.1 / 134.7 kg
270 lb
122.5 kg
133 / 125 lb
60.3 / 56.7 kg
178 / 178 lb
80.7 / 80.7 kg
240 / 240 lb
108.9 / 108.9 kg
307 / 305 lb
139.3 / 138.3 kg
280 lb
127 kg
136 / 128 lb
61.7 / 58.1 kg
183 / 183 lb
83 / 83 kg
246 / 246 lb
111.6 / 111.6 kg
315 / 312 lb
142.9 / 141.5 kg
290 lb
131.5 kg
139 / 131 lb
63 / 59.4 kg
187 / 187 lb
84.8 / 84.8 kg
252 / 252 lb
114.3 / 114.3 kg
322 / 319 lb
146.1 / 144.7 kg
300 lb
136.1 kg
142 / 134 lb
64.4 / 60.8 kg
191 / 191 lb
86.6 / 86.6 kg
258 / 258 lb
117 / 117 kg
329 / 327 lb
149.2 / 148.3 kg

Women’s Chest Supported Row vs Barbell Reverse Grip Bent Over Row Standards

How to read the table: The first number is Chest Supported Row; the second is Barbell Reverse Grip Bent Over Row. Each number is the lowest estimated one-rep max needed to reach that strength level. Scroll horizontally on smaller screens.

BodyweightNoviceIntermediateAdvancedElite
100 lb
45.4 kg
53 / 38 lb
24 / 17.2 kg
72 / 57 lb
32.7 / 25.9 kg
98 / 80 lb
44.5 / 36.3 kg
124 / 105 lb
56.2 / 47.6 kg
110 lb
49.9 kg
56 / 41 lb
25.4 / 18.6 kg
77 / 61 lb
34.9 / 27.7 kg
104 / 85 lb
47.2 / 38.6 kg
132 / 111 lb
59.9 / 50.3 kg
120 lb
54.4 kg
59 / 43 lb
26.8 / 19.5 kg
82 / 65 lb
37.2 / 29.5 kg
110 / 90 lb
49.9 / 40.8 kg
140 / 118 lb
63.5 / 53.5 kg
130 lb
59 kg
63 / 45 lb
28.6 / 20.4 kg
86 / 68 lb
39 / 30.8 kg
116 / 95 lb
52.6 / 43.1 kg
147 / 125 lb
66.7 / 56.7 kg
140 lb
63.5 kg
66 / 48 lb
29.9 / 21.8 kg
91 / 72 lb
41.3 / 32.7 kg
122 / 100 lb
55.3 / 45.4 kg
155 / 131 lb
70.3 / 59.4 kg
150 lb
68 kg
69 / 50 lb
31.3 / 22.7 kg
95 / 75 lb
43.1 / 34 kg
128 / 105 lb
58.1 / 47.6 kg
162 / 137 lb
73.5 / 62.1 kg
160 lb
72.6 kg
72 / 52 lb
32.7 / 23.6 kg
99 / 78 lb
44.9 / 35.4 kg
134 / 110 lb
60.8 / 49.9 kg
169 / 143 lb
76.7 / 64.9 kg
170 lb
77.1 kg
75 / 54 lb
34 / 24.5 kg
103 / 82 lb
46.7 / 37.2 kg
139 / 114 lb
63 / 51.7 kg
176 / 149 lb
79.8 / 67.6 kg
180 lb
81.6 kg
78 / 56 lb
35.4 / 25.4 kg
107 / 85 lb
48.5 / 38.6 kg
145 / 119 lb
65.8 / 54 kg
183 / 155 lb
83 / 70.3 kg
190 lb
86.2 kg
81 / 59 lb
36.7 / 26.8 kg
111 / 88 lb
50.3 / 39.9 kg
150 / 123 lb
68 / 55.8 kg
190 / 160 lb
86.2 / 72.6 kg
200 lb
90.7 kg
84 / 61 lb
38.1 / 27.7 kg
115 / 91 lb
52.2 / 41.3 kg
155 / 127 lb
70.3 / 57.6 kg
196 / 166 lb
88.9 / 75.3 kg
210 lb
95.3 kg
86 / 63 lb
39 / 28.6 kg
119 / 94 lb
54 / 42.6 kg
160 / 131 lb
72.6 / 59.4 kg
203 / 171 lb
92.1 / 77.6 kg
220 lb
99.8 kg
89 / 65 lb
40.4 / 29.5 kg
123 / 97 lb
55.8 / 44 kg
165 / 136 lb
74.8 / 61.7 kg
209 / 177 lb
94.8 / 80.3 kg
230 lb
104.3 kg
92 / 66 lb
41.7 / 29.9 kg
126 / 100 lb
57.2 / 45.4 kg
170 / 140 lb
77.1 / 63.5 kg
215 / 182 lb
97.5 / 82.6 kg
240 lb
108.9 kg
94 / 68 lb
42.6 / 30.8 kg
130 / 103 lb
59 / 46.7 kg
175 / 144 lb
79.4 / 65.3 kg
222 / 187 lb
100.7 / 84.8 kg

How Your Chest Supported Row vs Barbell Reverse Grip Bent Over Row Result Is Calculated

The calculator estimates each max, rates it against the standards for that exercise and bodyweight, then compares the two ratings. Here is the complete process.

1. Estimate a one-rep max from each set

For one rep, it uses the weight entered. For 2–12 reps, it runs both formulas and keeps the lower, less aggressive estimate.

  • Epley: weight × (1 + reps ÷ 30)
  • Brzycki: weight × 36 ÷ (37 − reps)

A published back-squat study supports estimated-max prediction under its study conditions. It does not independently validate every exercise or population used by this comparison. Estimates are more dependable from clean, difficult, lower-rep sets. See the Back-squat formula validation study and Published discussion of back-squat one-rep-max prediction research.

2. Find the chest supported row strength level

The standards use the sex-specific chest supported row thresholds from the individual tool. Targets begin at 190 lb for men and 150 lb for women, then adjust to your exact bodyweight: reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so larger lifters are expected to row more machine resistance without requiring strength to increase pound for pound.

3. Find the barbell reverse grip bent over row strength level

The standards use the sex-specific thresholds from the individual Barbell Reverse Grip Bent Over Row tool. Targets begin at 190 lb for men and 150 lb for women, then adjust to your exact bodyweight: reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so larger lifters are expected to lift more without requiring strength to increase pound for pound.

4. Compare the two results

Each max receives a level from Beginner through Elite. The lower-level lift is the priority. If the levels match, a priority appears only when one lift is at least 10 points farther from its next level. Otherwise, the result is Balanced.

The result shows which lift ranks lower, not why. Technique, fatigue, training history, and set quality can affect it. Age range is recorded anonymously but does not change the standards.

StageWhat happens
Estimate each maxUse the entered weight for 1 rep; for 2–12 reps, keep the lower formula result.
Rate the chest supported rowUse machine-resistance estimated max and adjust targets to exact bodyweight with the two-thirds rule.
Rate the barbell reverse grip bent over rowUse the canonical estimated max and adjust targets to exact bodyweight with the approved two-thirds rule.
Compare different levelsName the lower-level lift as the priority.
Compare matching levelsUse Balanced unless the difference in progress toward the next level reaches 10 points.

Use the calculator above to see both estimated maxes, strength levels, the priority or Balanced result, and both next-level targets.

How Men’s Chest Supported Row and Barbell Reverse Grip Bent Over Row Standards Differ

How to read both charts: Choose a strength level, find bodyweight along the bottom, and follow that level’s line. Zero means the two standards are equal. Above zero means the barbell reverse grip bent over row standard is higher; below zero means the chest supported row standard is higher. On a phone, swipe the chart left and right to inspect the full-size lines and labels. The tables provide the exact pounds and kilograms.

What the men’s data shows:

Novice closest match120 lb

The standards come closest at 120 lb.

Chest Supported Row target is higher2 strength levels

Novice and Elite at every displayed bodyweight.

Elite difference2 → 2 lb

0.9 → 0.9 kg from 120 to 300 lb bodyweight.

How men’s chest supported row and barbell reverse grip bent over row standards differ by bodyweightFour colored lines show the difference in pounds between the barbell reverse grip bent over row and chest supported row standards at Novice, Intermediate, Advanced, and Elite. Zero means the two standards are equal. Above zero means the barbell reverse grip bent over row standard is higher. Below zero means the chest supported row standard is higher.NoviceIntermediateAdvancedElite−8−6−4−20+2120140160180200220240260280300Bodyweight (lb)Difference between standards (lb)

How to read the table: Every number is the barbell reverse grip bent over row standard minus the chest supported row standard. A plus sign means the barbell reverse grip bent over row standard is higher. A minus sign means the chest supported row standard is higher.

BodyweightNoviceIntermediateAdvancedElite
120 lb
54.4 kg
−4 lb
−1.8 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
130 lb
59 kg
−5 lb
−2.3 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
140 lb
63.5 kg
−5 lb
−2.3 kg
0 lb
0 kg
0 lb
0 kg
−1 lb
−0.4 kg
150 lb
68 kg
−5 lb
−2.2 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
160 lb
72.6 kg
−6 lb
−2.7 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
170 lb
77.1 kg
−5 lb
−2.3 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
180 lb
81.6 kg
−6 lb
−2.7 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
190 lb
86.2 kg
−6 lb
−2.7 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
200 lb
90.7 kg
−7 lb
−3.1 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−1 kg
210 lb
95.3 kg
−6 lb
−2.7 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
220 lb
99.8 kg
−7 lb
−3.2 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
230 lb
104.3 kg
−7 lb
−3.2 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
240 lb
108.9 kg
−7 lb
−3.2 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg
250 lb
113.4 kg
−7 lb
−3.2 kg
0 lb
0 kg
0 lb
0 kg
−3 lb
−1.3 kg
260 lb
117.9 kg
−7 lb
−3.2 kg
0 lb
0 kg
0 lb
0 kg
−3 lb
−1.4 kg
270 lb
122.5 kg
−8 lb
−3.6 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−1 kg
280 lb
127 kg
−8 lb
−3.6 kg
0 lb
0 kg
0 lb
0 kg
−3 lb
−1.4 kg
290 lb
131.5 kg
−8 lb
−3.6 kg
0 lb
0 kg
0 lb
0 kg
−3 lb
−1.4 kg
300 lb
136.1 kg
−8 lb
−3.6 kg
0 lb
0 kg
0 lb
0 kg
−2 lb
−0.9 kg

How Women’s Chest Supported Row and Barbell Reverse Grip Bent Over Row Standards Differ

What the women’s data shows:

Novice closest match100 lb

The standards come closest at 100 lb.

Chest Supported Row target is higher4 strength levels

Novice, Intermediate, Advanced, and Elite at every displayed bodyweight.

Elite difference19 → 35 lb

8.6 → 15.9 kg from 100 to 240 lb bodyweight.

How women’s chest supported row and barbell reverse grip bent over row standards differ by bodyweightFour colored lines show the difference in pounds between the barbell reverse grip bent over row and chest supported row standards at Novice, Intermediate, Advanced, and Elite. Zero means the two standards are equal. Above zero means the barbell reverse grip bent over row standard is higher. Below zero means the chest supported row standard is higher.NoviceIntermediateAdvancedElite−40−30−20−100+10100120140160180200220240Bodyweight (lb)Difference between standards (lb)

How to read the table: Every number is the barbell reverse grip bent over row standard minus the chest supported row standard. A plus sign means the barbell reverse grip bent over row standard is higher. A minus sign means the chest supported row standard is higher.

BodyweightNoviceIntermediateAdvancedElite
100 lb
45.4 kg
−15 lb
−6.8 kg
−15 lb
−6.8 kg
−18 lb
−8.2 kg
−19 lb
−8.6 kg
110 lb
49.9 kg
−15 lb
−6.8 kg
−16 lb
−7.2 kg
−19 lb
−8.6 kg
−21 lb
−9.6 kg
120 lb
54.4 kg
−16 lb
−7.3 kg
−17 lb
−7.7 kg
−20 lb
−9.1 kg
−22 lb
−10 kg
130 lb
59 kg
−18 lb
−8.2 kg
−18 lb
−8.2 kg
−21 lb
−9.5 kg
−22 lb
−10 kg
140 lb
63.5 kg
−18 lb
−8.1 kg
−19 lb
−8.6 kg
−22 lb
−9.9 kg
−24 lb
−10.9 kg
150 lb
68 kg
−19 lb
−8.6 kg
−20 lb
−9.1 kg
−23 lb
−10.5 kg
−25 lb
−11.4 kg
160 lb
72.6 kg
−20 lb
−9.1 kg
−21 lb
−9.5 kg
−24 lb
−10.9 kg
−26 lb
−11.8 kg
170 lb
77.1 kg
−21 lb
−9.5 kg
−21 lb
−9.5 kg
−25 lb
−11.3 kg
−27 lb
−12.2 kg
180 lb
81.6 kg
−22 lb
−10 kg
−22 lb
−9.9 kg
−26 lb
−11.8 kg
−28 lb
−12.7 kg
190 lb
86.2 kg
−22 lb
−9.9 kg
−23 lb
−10.4 kg
−27 lb
−12.2 kg
−30 lb
−13.6 kg
200 lb
90.7 kg
−23 lb
−10.4 kg
−24 lb
−10.9 kg
−28 lb
−12.7 kg
−30 lb
−13.6 kg
210 lb
95.3 kg
−23 lb
−10.4 kg
−25 lb
−11.4 kg
−29 lb
−13.2 kg
−32 lb
−14.5 kg
220 lb
99.8 kg
−24 lb
−10.9 kg
−26 lb
−11.8 kg
−29 lb
−13.1 kg
−32 lb
−14.5 kg
230 lb
104.3 kg
−26 lb
−11.8 kg
−26 lb
−11.8 kg
−30 lb
−13.6 kg
−33 lb
−14.9 kg
240 lb
108.9 kg
−26 lb
−11.8 kg
−27 lb
−12.3 kg
−31 lb
−14.1 kg
−35 lb
−15.9 kg

Chest Supported Row and Barbell Reverse Grip Bent Over Row Exercises Used by This Calculator

This calculator uses a bilateral chest-supported machine row and a strict barbell reverse grip bent over row test. Use strict canonical Chest Supported Row and Barbell Reverse Grip Bent Over Row tests. Do not mix variations, assistance, partial range, momentum, or different load conventions.

Keep the chest on the pad through the full row

Enter the displayed or total loaded resistance under the machine’s convention. Keep the chest and torso fully supported, pull from full arm extension to the lower chest or upper abdomen, and return under control. Do not enter per-side load, unsupported, cable, dumbbell, barbell, or single-arm rows, partial reps, bounced reps, or torso-lifted reps.

Use the canonical Barbell Reverse Grip Bent Over Row setup and load convention

the entered weight for strict Barbell Reverse Grip Bent Over Row valid Barbell Reverse Grip Bent Over Row reps Pull the bar to a consistent lower-trunk touch or near-touch point, then lower under control to arm’s length without standing up or bouncing. A valid rep finishes when the bar reaches the consistent row height with elbows drawn back and trunk position maintained Consistent setup, range, and finish quality across the entered set No substituted exercise or assisted reps

Enter one recent Chest Supported Row result and one recent Barbell Reverse Grip Bent Over Row result

Use each exercise’s canonical input: Displayed or total loaded machine resistance for Chest Supported Row and Weight used for Barbell Reverse Grip Bent Over Row.

  • Chest Supported Row — View the individual Chest Supported Row standards and next strength-level target.
  • Barbell Reverse Grip Bent Over Row — View the individual Barbell Reverse Grip Bent Over Row standards and next strength-level target.
  • Barbell Bent-Over Row — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
  • Yates Bent Over Row — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
  • Barbell Seal Row — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
  • Barbell Bench Pull — Use this related standards tool to compare a registry-approved neighboring exercise without mixing its result into this comparison.
Use Calculator