Bent Over Dumbbell Rear Delt Raise with Head On Bench Strength Standards Calculator
Under strict Bent Over Dumbbell Rear Delt Raise with Head On Bench strength standards, Novice starts around 0.15x bodyweight for men and 0.09x for women, while Elite starts around 0.46x for men and 0.32x for women.
Enter your bodyweight, weight lifted, and reps to estimate your 1RM and see whether your Bent Over Dumbbell Rear Delt Raise with Head On Bench is Novice, Intermediate, Advanced, or Elite for your bodyweight.
The calculator converts your set into an estimated 1RM-to-bodyweight ratio, then compares that ratio with the Bent Over Dumbbell Rear Delt Raise with Head On Bench standards for your sex. This keeps the result focused on relative strength instead of only the absolute weight lifted.
Understanding Your Head-Supported Rear Delt Raise Strength Score
Your Head-Supported Rear Delt Raise strength score is estimated 1RM divided by bodyweight. The calculator uses the entered weight for strict Bent Over Dumbbell Rear Delt Raise with Head On Bench, valid Bent Over Dumbbell Rear Delt Raise with Head On Bench reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.
This result is specific to Head-Supported Rear Delt Raise. A counted rep should meet this standard: The movement must follow the defined Bent Over Dumbbell Rear Delt Raise with Head On Bench path: matching dumbbells are raised out to the sides from a bent-over head-supported position to a controlled rear-delt finish. A valid finish requires the defined end position for Bent Over Dumbbell Rear Delt Raise with Head On Bench, visible control of the weight, and no assistance or substituted exercise style. The score is not a general label for every nearby horizontal pull exercise, and it should not be used for Dumbbell Row, Dumbbell Rear Delt Row, Reverse Fly without head support if setup differs, Cable Reverse Fly, Machine Rear Delt Fly, Shrugs, Swinging raises, Partial raises, Combined-pair weight entry. Those variations may be useful training choices, but they answer a different standards question.
For example, a 200 lb male with a 67 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 48 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.
The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.
Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.
Head-Supported Rear Delt Raise Strength Standards
Head-Supported Rear Delt Raise standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.
The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the entered weight for strict Bent Over Dumbbell Rear Delt Raise with Head On Bench, valid reps, and no substitutions from related lifts.
Men’s Head-Supported Rear Delt Raise Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 120 lb | 18 lb | 28 lb | 40 lb | 55 lb+ | 68 lb |
| 130 lb | 19 lb | 30 lb | 43 lb | 59 lb+ | 74 lb |
| 140 lb | 21 lb | 32 lb | 47 lb | 64 lb+ | 80 lb |
| 150 lb | 22 lb | 35 lb | 50 lb | 68 lb+ | 85 lb |
| 160 lb | 24 lb | 37 lb | 53 lb | 73 lb+ | 91 lb |
| 170 lb | 25 lb | 39 lb | 57 lb | 77 lb+ | 97 lb |
| 180 lb | 26 lb | 41 lb | 60 lb | 82 lb+ | 103 lb |
| 190 lb | 28 lb | 44 lb | 63 lb | 86 lb+ | 108 lb |
| 200 lb | 29 lb | 46 lb | 67 lb | 91 lb+ | 114 lb |
| 210 lb | 31 lb | 48 lb | 70 lb | 96 lb+ | 120 lb |
| 220 lb | 32 lb | 51 lb | 73 lb | 100 lb+ | 125 lb |
| 230 lb | 34 lb | 53 lb | 77 lb | 105 lb+ | 131 lb |
| 240 lb | 35 lb | 55 lb | 80 lb | 109 lb+ | 137 lb |
| 250 lb | 37 lb | 58 lb | 84 lb | 114 lb+ | 143 lb |
| 260 lb | 38 lb | 60 lb | 87 lb | 118 lb+ | 148 lb |
Women’s Head-Supported Rear Delt Raise Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 100 lb | 9 lb | 15 lb | 23 lb | 32 lb+ | 41 lb |
| 110 lb | 10 lb | 16 lb | 25 lb | 35 lb+ | 45 lb |
| 120 lb | 11 lb | 18 lb | 27 lb | 38 lb+ | 49 lb |
| 130 lb | 12 lb | 19 lb | 30 lb | 41 lb+ | 54 lb |
| 140 lb | 13 lb | 21 lb | 32 lb | 45 lb+ | 58 lb |
| 150 lb | 14 lb | 22 lb | 34 lb | 48 lb+ | 62 lb |
| 160 lb | 15 lb | 24 lb | 36 lb | 51 lb+ | 66 lb |
| 170 lb | 16 lb | 25 lb | 39 lb | 54 lb+ | 70 lb |
| 180 lb | 17 lb | 27 lb | 41 lb | 57 lb+ | 74 lb |
| 190 lb | 17 lb | 28 lb | 43 lb | 60 lb+ | 78 lb |
| 200 lb | 18 lb | 30 lb | 46 lb | 64 lb+ | 82 lb |
| 210 lb | 19 lb | 31 lb | 48 lb | 67 lb+ | 87 lb |
| 220 lb | 20 lb | 33 lb | 50 lb | 70 lb+ | 91 lb |
Men: Beginner is below 0.147x, Novice begins at 0.147x, Intermediate begins at 0.230x, Advanced begins at 0.334x, Elite begins at 0.455x, and Stretch is 0.570x bodyweight. Women: Beginner is below 0.092x, Novice begins at 0.092x, Intermediate begins at 0.149x, Advanced begins at 0.228x, Elite begins at 0.318x, and Stretch is 0.412x bodyweight.
At 200 lb bodyweight, a male lifter needs about 67 lb for Advanced and 91 lb for Elite. At 150 lb bodyweight, a female lifter needs about 34 lb for Advanced and 48 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.
How the Head-Supported Rear Delt Raise Calculator Works
The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.
Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 67 lb estimated 1RM, the ratio is near 0.334x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.
Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the entered weight for strict Bent Over Dumbbell Rear Delt Raise with Head On Bench and valid Bent Over Dumbbell Rear Delt Raise with Head On Bench reps that meet the accepted rule.
Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.
The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Head-Supported Rear Delt Raise question described here, using the same bodyweight-ratio logic as the rest of the standards system.
Elite Head-Supported Rear Delt Raise Strength Levels
Elite Head-Supported Rear Delt Raise strength starts at 0.455x bodyweight for men and 0.318x bodyweight for women. Stretch benchmarks are 0.570x for men and 0.412x for women, marking unusually strong results inside this standards system.
At 200 lb bodyweight, Elite begins around 91 lb for men. At 150 lb bodyweight, Elite begins around 48 lb for women. Those numbers are impressive only when the entry still reflects the entered weight for strict Bent Over Dumbbell Rear Delt Raise with Head On Bench, valid Bent Over Dumbbell Rear Delt Raise with Head On Bench reps, and the accepted rep.
Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Head-Supported Rear Delt Raise.
Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.
Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.
Head-Supported Rear Delt Raise Strength Compared to Other Lifts
Comparisons are useful because they explain why standards differ. Head-Supported Rear Delt Raise sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.
| Related movement | Comparison purpose | What the gap can reveal |
|---|---|---|
| Dumbbell Reverse Fly | closest neighboring standard | A higher Head-Supported Rear Delt Raise score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates. |
| Dumbbell Rear Delt Row | same family contrast | If the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here. |
| Cable Reverse Fly | equipment contrast | If this score is far ahead, confirm the set did not drift into a disallowed variation. |
| Cable Rear Delt Row | range and control comparison | The comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different. |
| Single Arm Dumbbell Rear Delt Fly | heavier strength ceiling | A similar tier can suggest balanced development, but it still does not make the two entries interchangeable. |
| Chest Supported Dumbbell Row | technique transfer check | Use the gap to choose training work instead of forcing one result to predict the other. |
If a related lift is much stronger, look for the one constraint unique to Head-Supported Rear Delt Raise: range, support position, grip, bracing, or finish control. If Head-Supported Rear Delt Raise is much stronger, confirm that the set did not become one of the disallowed variations.
Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.
The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.
Milestones in Head-Supported Rear Delt Raise Strength
Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.
| Milestone | Example target | Why it matters | Next focus |
|---|---|---|---|
| First valid strict bent over dumbbell rear delt raise with head on bench rep | 3 to 5 clean reps at a repeatable training weight | Shows the lifter can follow the accepted rule before a max test | Keep setup identical across sets |
| Novice boundary | Men near 29 lb; women near 14 lb | Creates a first bodyweight-ratio benchmark | Build range and control |
| Intermediate boundary | Men near 46 lb; women near 22 lb | Shows the lift is no longer just familiar | Address the main limiter |
| Advanced boundary | Men near 67 lb; women near 34 lb | Marks strong relative performance for this exercise | Use smaller jumps and more video review |
| Elite boundary | Men near 91 lb; women near 48 lb | Shows high-level strength in the exact standard | Protect strict rep quality |
| Stretch benchmark | Men near 114 lb; women near 62 lb | Represents an unusually strong score in this calculator | Retest sparingly and recover well |
| Five-rep practice target | Use a set that estimates near 46 lb for a 200 lb male or 22 lb for a 150 lb female | Builds a cleaner estimate before a heavier test | Keep every rep visually identical |
| Ten percent improvement target | Move a 46 lb estimate toward 51 lb, or a 22 lb estimate toward 25 lb | Gives a concrete block goal without requiring a new tier | Retest only when the same rule survives |
Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Head-Supported Rear Delt Raise milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.
Related Strength Standards Tools
Related tools place Head-Supported Rear Delt Raise inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.
- Dumbbell Reverse Fly is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Head-Supported Rear Delt Raise. Compare it after a clean Head-Supported Rear Delt Raise test to see whether this exact setup is the limiter.
- Dumbbell Rear Delt Row gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
- Cable Reverse Fly is useful when the current score feels surprising. Check it only after the Head-Supported Rear Delt Raise reps are valid, then use the difference to choose assistance work.
- Cable Rear Delt Row can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
- Single Arm Dumbbell Rear Delt Fly helps frame broader strength without replacing the Head-Supported Rear Delt Raise standard. If it is far ahead, audit the exact range and finish required here.
- Chest Supported Dumbbell Row offers a technique-transfer check. Similar tiers suggest balanced development, while different tiers can reveal where the path, support, or rep count breaks down.
- Face Pull belongs in the comparison set because the name may sound close while the accepted rep is not identical. Use the tool as context, not as a replacement entry.
- Barbell Rear Delt Row gives another bodyweight-ratio lens for the same training neighborhood. The most useful note is why the gap exists: range, depth, path, bracing, or control.
Use these tools after you have a valid Head-Supported Rear Delt Raise result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.
FAQ
What is a good Head-Supported Rear Delt Raise score?
A good score depends on sex, bodyweight, and valid rep quality. Intermediate means the lifter has moved past basic familiarity with the tested movement. Advanced means the result is strong for bodyweight. Elite means the lifter is showing high relative strength in this exact pattern. Use the exact calculator result rather than one absolute weight.
What should I enter in the calculator?
Enter sex, bodyweight, the counted reps from the valid set, and the working weight defined by this tool’s setup. Keep bodyweight and working weight in the same unit family. Do not enter a number from another exercise, a partial-range set that hides invalid reps, or a plate-only note unless this exact tool defines that entry. The entry should match a valid set, because the tier threshold is only meaningful when the rep rule matches the calculator.
Can I enter a related exercise if it feels close?
No. Related lifts are useful for context and comparison, but they are not entries for this calculator. Dumbbell Row, Dumbbell Rear Delt Row, Reverse Fly without head support if setup differs, Cable Reverse Fly, Machine Rear Delt Fly, Shrugs, Swinging raises, Partial raises, Combined-pair weight entry change the strength demand enough to distort the ratio. Use the matching calculator for the movement you actually performed, then compare tiers only after both results use valid reps.
Do multi-rep sets work for this standard?
Yes, as long as every counted rep follows the same rule. The calculator estimates 1RM from the entered reps, then divides by bodyweight. Lower-rep sets usually give a cleaner estimate than long sets where range, path, or control changes under fatigue.
Should I use pounds or kilograms?
Either unit works. Enter bodyweight and working weight in the same unit family shown by the calculator. The tier is based on a ratio, so a correct kilogram entry and a correct pound entry produce the same classification.
Why is my Head-Supported Rear Delt Raise lower than a related lift?
That is often normal. This calculator includes constraints that nearby lifts may not share, such as range, support, path, grip, depth, or finish control. A lower ratio can reveal the exact quality the accepted rep is meant to train. Compare the gap with the standards table before changing the exercise, because the difference may be a valid weakness rather than a bad score.
When should I reject a result?
Reject the result when the setup changes, assistance appears, range shortens, control disappears, or the rep becomes Dumbbell Row, Dumbbell Rear Delt Row, Reverse Fly without head support if setup differs, Cable Reverse Fly, Machine Rear Delt Fly, Shrugs, Swinging raises, Partial raises, Combined-pair weight entry. The calculator is most useful when it reflects the strict version of the exercise, not the heaviest neighboring movement.
How often should I retest?
Retest every four to eight weeks for most training blocks, or after a clear technical improvement. Testing too often can reward short-term risk more than durable strength. Use practice sets between tests to make the accepted rep more automatic.