Endura

Barbell Bent-Over Row vs Weighted Ring Pull Up Strength Standards

Compare your bent-over row and weighted ring pull up against strength standards for your sex and bodyweight. Use one clean 1–12-rep set per lift to review estimated one-rep maxes, strength levels, next targets, and priority.

First lift: total barbell weight and 1–12 strict reps. Second lift: weight used and 1–12 strict reps. Pounds or kilograms. For the first exercise, bar is pulled to the lower ribs or upper abdomen each rep. For the second exercise, pull from dead hang to a clear top standard with rings controlled. Each lift is compared with its own standards, so the heavier lift is not automatically the stronger one.

Bent Over Row vs Weighted Ring Pull Up Strength Standards

Use these tables to compare the estimated one-rep max required for the barbell bent-over row and weighted ring pull up to reach the same strength level at each listed bodyweight. The numbers are calculator targets, not a required gap between the two lifts.

Choose the men’s or women’s table, find the closest bodyweight row, and read across to Novice, Intermediate, Advanced, or Elite. Each entry shows Bent-Over Row / Weighted Ring Pull Up, with pounds above kilograms. Use the calculator for your exact bodyweight and recent sets.

Men’s Bent-Over Row vs Weighted Ring Pull Up Standards

How to read the table: Find the closest bodyweight, then use the labeled exercise row. Every strength-level entry shows one target with pounds first and kilograms beneath it.

Men’s Bent-Over Row vs Weighted Ring Pull Up standards
BodyweightExerciseNoviceIntermediateAdvancedElite
120 lb54.4 kgBent-Over Row91 lb41.3 kg119 lb54 kg160 lb72.6 kg203 lb92.1 kg
Weighted Ring Pull Up10 lb4.4 kg22 lb9.8 kg41 lb18.5 kg65 lb29.4 kg
130 lb59 kgBent-Over Row96 lb43.5 kg126 lb57.2 kg169 lb76.7 kg214 lb97.1 kg
Weighted Ring Pull Up10 lb4.7 kg23 lb10.6 kg44 lb20.1 kg70 lb31.9 kg
140 lb63.5 kgBent-Over Row101 lb45.8 kg132 lb59.9 kg178 lb80.7 kg225 lb102.1 kg
Weighted Ring Pull Up11 lb5.1 kg25 lb11.4 kg48 lb21.6 kg76 lb34.3 kg
150 lb68 kgBent-Over Row106 lb48.1 kg138 lb62.6 kg186 lb84.4 kg236 lb107 kg
Weighted Ring Pull Up12 lb5.4 kg27 lb12.2 kg51 lb23.1 kg81 lb36.7 kg
160 lb72.6 kgBent-Over Row111 lb50.3 kg144 lb65.3 kg194 lb88 kg246 lb111.6 kg
Weighted Ring Pull Up13 lb5.8 kg29 lb13.1 kg54 lb24.7 kg86 lb39.2 kg
170 lb77.1 kgBent-Over Row115 lb52.2 kg150 lb68 kg202 lb91.6 kg256 lb116.1 kg
Weighted Ring Pull Up14 lb6.2 kg31 lb13.9 kg58 lb26.2 kg92 lb41.6 kg
180 lb81.6 kgBent-Over Row120 lb54.4 kg156 lb70.8 kg210 lb95.3 kg266 lb120.7 kg
Weighted Ring Pull Up14 lb6.5 kg32 lb14.7 kg61 lb27.7 kg97 lb44.1 kg
190 lb86.2 kgBent-Over Row124 lb56.2 kg162 lb73.5 kg218 lb98.9 kg276 lb125.2 kg
Weighted Ring Pull Up15 lb6.9 kg34 lb15.5 kg65 lb29.3 kg103 lb46.5 kg
200 lb90.7 kgBent-Over Row128 lb58.1 kg168 lb76.2 kg226 lb102.5 kg286 lb129.7 kg
Weighted Ring Pull Up16 lb7.3 kg36 lb16.3 kg68 lb30.8 kg108 lb49 kg
210 lb95.3 kgBent-Over Row133 lb60.3 kg173 lb78.5 kg233 lb105.7 kg295 lb133.8 kg
Weighted Ring Pull Up17 lb7.6 kg38 lb17.2 kg71 lb32.4 kg113 lb51.5 kg
220 lb99.8 kgBent-Over Row137 lb62.1 kg179 lb81.2 kg240 lb108.9 kg304 lb137.9 kg
Weighted Ring Pull Up18 lb8 kg40 lb18 kg75 lb33.9 kg119 lb53.9 kg
230 lb104.3 kgBent-Over Row141 lb64 kg184 lb83.5 kg248 lb112.5 kg313 lb142 kg
Weighted Ring Pull Up18 lb8.3 kg41 lb18.8 kg78 lb35.5 kg124 lb56.3 kg
240 lb108.9 kgBent-Over Row145 lb65.8 kg189 lb85.7 kg255 lb115.7 kg323 lb146.5 kg
Weighted Ring Pull Up19 lb8.7 kg43 lb19.6 kg82 lb37 kg130 lb58.8 kg
250 lb113.4 kgBent-Over Row149 lb67.6 kg195 lb88.5 kg262 lb118.8 kg331 lb150.1 kg
Weighted Ring Pull Up20 lb9.1 kg45 lb20.4 kg85 lb38.6 kg135 lb61.2 kg
260 lb117.9 kgBent-Over Row153 lb69.4 kg200 lb90.7 kg269 lb122 kg340 lb154.2 kg
Weighted Ring Pull Up21 lb9.4 kg47 lb21.2 kg88 lb40.1 kg140 lb63.7 kg
270 lb122.5 kgBent-Over Row157 lb71.2 kg205 lb93 kg276 lb125.2 kg349 lb158.3 kg
Weighted Ring Pull Up22 lb9.8 kg49 lb22.1 kg92 lb41.7 kg146 lb66.2 kg
280 lb127 kgBent-Over Row161 lb73 kg210 lb95.3 kg282 lb127.9 kg357 lb161.9 kg
Weighted Ring Pull Up22 lb10.2 kg50 lb22.9 kg95 lb43.2 kg151 lb68.6 kg
290 lb131.5 kgBent-Over Row164 lb74.4 kg215 lb97.5 kg289 lb131.1 kg366 lb166 kg
Weighted Ring Pull Up23 lb10.5 kg52 lb23.7 kg99 lb44.7 kg157 lb71 kg
300 lb136.1 kgBent-Over Row168 lb76.2 kg220 lb99.8 kg296 lb134.3 kg374 lb169.6 kg
Weighted Ring Pull Up24 lb10.9 kg54 lb24.5 kg102 lb46.3 kg162 lb73.5 kg

Women’s Bent-Over Row vs Weighted Ring Pull Up Standards

How to read the table: Find the closest bodyweight, then use the labeled exercise row. Every strength-level entry shows one target with pounds first and kilograms beneath it.

Women’s Bent-Over Row vs Weighted Ring Pull Up standards
BodyweightExerciseNoviceIntermediateAdvancedElite
100 lb45.4 kgBent-Over Row63 lb28.6 kg86 lb39 kg114 lb51.7 kg143 lb64.9 kg
Weighted Ring Pull Up4 lb1.6 kg9 lb4.1 kg18 lb8.2 kg32 lb14.5 kg
110 lb49.9 kgBent-Over Row67 lb30.4 kg92 lb41.7 kg122 lb55.3 kg153 lb69.4 kg
Weighted Ring Pull Up4 lb1.7 kg10 lb4.5 kg20 lb9 kg35 lb16 kg
120 lb54.4 kgBent-Over Row72 lb32.7 kg97 lb44 kg129 lb58.5 kg162 lb73.5 kg
Weighted Ring Pull Up4 lb1.9 kg11 lb4.9 kg22 lb9.8 kg38 lb17.4 kg
130 lb59 kgBent-Over Row75 lb34 kg103 lb46.7 kg136 lb61.7 kg171 lb77.6 kg
Weighted Ring Pull Up5 lb2.1 kg12 lb5.3 kg23 lb10.6 kg42 lb18.9 kg
140 lb63.5 kgBent-Over Row79 lb35.8 kg108 lb49 kg143 lb64.9 kg180 lb81.6 kg
Weighted Ring Pull Up5 lb2.2 kg13 lb5.7 kg25 lb11.4 kg45 lb20.3 kg
150 lb68 kgBent-Over Row83 lb37.6 kg113 lb51.3 kg150 lb68 kg188 lb85.3 kg
Weighted Ring Pull Up5 lb2.4 kg13 lb6.1 kg27 lb12.2 kg48 lb21.8 kg
160 lb72.6 kgBent-Over Row87 lb39.5 kg118 lb53.5 kg157 lb71.2 kg196 lb88.9 kg
Weighted Ring Pull Up6 lb2.5 kg14 lb6.5 kg29 lb13.1 kg51 lb23.2 kg
170 lb77.1 kgBent-Over Row90 lb40.8 kg123 lb55.8 kg163 lb73.9 kg204 lb92.5 kg
Weighted Ring Pull Up6 lb2.7 kg15 lb6.9 kg31 lb13.9 kg54 lb24.7 kg
180 lb81.6 kgBent-Over Row94 lb42.6 kg128 lb58.1 kg169 lb76.7 kg212 lb96.2 kg
Weighted Ring Pull Up6 lb2.9 kg16 lb7.3 kg32 lb14.7 kg58 lb26.1 kg
190 lb86.2 kgBent-Over Row97 lb44 kg132 lb59.9 kg176 lb79.8 kg220 lb99.8 kg
Weighted Ring Pull Up7 lb3 kg17 lb7.8 kg34 lb15.5 kg61 lb27.6 kg
200 lb90.7 kgBent-Over Row101 lb45.8 kg137 lb62.1 kg182 lb82.6 kg228 lb103.4 kg
Weighted Ring Pull Up7 lb3.2 kg18 lb8.2 kg36 lb16.3 kg64 lb29 kg
210 lb95.3 kgBent-Over Row104 lb47.2 kg141 lb64 kg188 lb85.3 kg235 lb106.6 kg
Weighted Ring Pull Up7 lb3.3 kg19 lb8.6 kg38 lb17.2 kg67 lb30.5 kg
220 lb99.8 kgBent-Over Row107 lb48.5 kg146 lb66.2 kg194 lb88 kg243 lb110.2 kg
Weighted Ring Pull Up8 lb3.5 kg20 lb9 kg40 lb18 kg70 lb31.9 kg
230 lb104.3 kgBent-Over Row110 lb49.9 kg150 lb68 kg199 lb90.3 kg250 lb113.4 kg
Weighted Ring Pull Up8 lb3.7 kg21 lb9.4 kg41 lb18.8 kg74 lb33.4 kg
240 lb108.9 kgBent-Over Row114 lb51.7 kg155 lb70.3 kg205 lb93 kg257 lb116.6 kg
Weighted Ring Pull Up8 lb3.8 kg22 lb9.8 kg43 lb19.6 kg77 lb34.8 kg

How Your Bent Over Row vs Weighted Ring Pull Up Result Is Calculated

The calculator estimates both one-rep maxes, rates each one against its exercise and bodyweight standards, and then compares the two ratings.

1. Estimate a one-rep max from each set

A one-rep set uses the entered weight. For 2–12 reps, both formulas are calculated and the lower estimate is retained.

  • Epley: weight × (1 + reps ÷ 30)
  • Brzycki: weight × 36 ÷ (37 − reps)

Use recent Bent-Over Row and Weighted Ring Pull Up sets with consistent technique and full intended range of motion. Difficult lower-rep sets generally make the estimated max less dependent on extrapolation.

2. Find the barbell bent-over row strength level

For barbell bent-over row, the individual exercise thresholds start from reference bodyweights of 190 lb for men and 150 lb for women. Exact-bodyweight targets use reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so larger lifters are expected to row more without pound-for-pound scaling.

3. Find the weighted ring pull up strength level

The individual Weighted Ring Pull Up calculator supplies sex-specific standards for estimated added external load divided by bodyweight. Novice through Elite and the stretch benchmark use the exact exercise-specific threshold export; bodyweight is not added to the entered load.

4. Compare the two results

The lift with the lower Beginner-to-Elite rating is the priority. If both ratings match, the calculator requires a 10-point difference in next-level progress before naming a priority; otherwise it reports Balanced.

A priority result is a standards comparison, not a diagnosis. Differences in technique, fatigue, practice, or set effort may influence it. Age range is recorded anonymously and does not alter these standards.

StageWhat happens
Estimate each maxUse the entered weight for 1 rep; for 2–12 reps, keep the lower formula result.
Rate the bent-over rowUse total-barbell estimated max and adjust targets with the two-thirds rule.
Rate the weighted ring pull upUse the exercise-specific added-load-to-bodyweight thresholds directly without allometric rescaling.
Compare different levelsName the lower-level lift as the priority.
Compare matching levelsUse Balanced unless the difference in progress toward the next level reaches 10 points.

The calculator above applies these steps to your exact entries and reports both lift ratings, both next targets, and the final comparison.

How Men’s Bent Over Row and Weighted Ring Pull Up Standards Differ

What the men’s data shows:

Novice closest match120 lb

The standards come closest at 120 lb.

Bent-Over Row target is higher4 strength levels

Novice, Intermediate, Advanced, and Elite at every displayed bodyweight.

Elite difference138 → 212 lb

62.7 → 96.1 kg from 120 to 300 lb bodyweight.

How to read this chart: Choose a strength level and follow its line across bodyweight. Values show the Weighted Ring Pull Up standard minus the Bent-Over Row standard: zero means equal, above zero means the Weighted Ring Pull Up standard is higher, and below zero means the Bent-Over Row standard is higher. Swipe horizontally on mobile. Use the standards table for exact lb/kg targets.

Line chart loading. The standards tables above contain the exact pounds and kilograms.

How Women’s Bent Over Row and Weighted Ring Pull Up Standards Differ

What the women’s data shows:

Novice closest match100 lb

The standards come closest at 100 lb.

Bent-Over Row target is higher4 strength levels

Across all listed bodyweights, Novice, Intermediate, Advanced, and Elite keep the same higher-target direction.

Elite difference111 → 180 lb

At Elite, the difference is 50.4 kg at 100 lb and 81.8 kg at 240 lb.

How to read this chart: Choose a strength level and follow its line across bodyweight. Values show the Weighted Ring Pull Up standard minus the Bent-Over Row standard: zero means equal, above zero means the Weighted Ring Pull Up standard is higher, and below zero means the Bent-Over Row standard is higher. Swipe horizontally on mobile. Use the standards table for exact lb/kg targets.

Line chart loading. The standards tables above contain the exact pounds and kilograms.

Bent Over Row and Weighted Ring Pull Up Exercises Used by This Calculator

Compare like-for-like attempts by keeping the barbell bent-over row and weighted ring pull up setup consistent with their individual rules. Use strict, repeatable Bent Over Row and Weighted Ring Pull Up tests that follow each exercise’s setup, range of motion, equipment, and load rules. Do not mix variations, assistance, partial range, momentum, or different load conventions.

Use the Barbell Bent-Over Row setup and load convention

Barbell starts from a dead hang below the shoulders. Torso is hinged forward and remains roughly near-parallel to the floor. Knees are slightly bent, hips are hinged, and the spine stays neutral. Bar is pulled to the lower ribs or upper abdomen each rep. Arms extend fully at the bottom of each rep. No torso heaving, hip snap, or body English. Consistent torso angle and bar path are required across tests. No Pendlay rows, Yates rows, cheat rows, T-bar rows, Smith machine rows, machine rows, partial range variants, or equipped lifting standards. Estimated 1RM is calculated from the entered load and reps.

Use the Weighted Ring Pull Up setup and load convention

The entered weight for strict Weighted Ring Pull Up. Valid Weighted Ring Pull Up reps. Pull from dead hang to a clear top standard with rings controlled, then lower under control to the same hang and finish with a valid rep returns to controlled full extension on the rings before the next pull. Consistent setup, range, and finish quality across the entered set. No substituted exercise or assisted reps.

Enter one recent Bent Over Row result and one recent Weighted Ring Pull Up result

First lift: total barbell weight and 1–12 strict reps. Second lift: weight used and 1–12 strict reps. Pounds or kilograms.

  • Barbell Bent-Over Row — View the individual Bent-Over Row standards and next strength-level target.
  • Weighted Ring Pull Up — View the individual Weighted Ring Pull Up standards and next strength-level target.
  • Ring Pull Up Strength Standards — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Ring Chin Up Strength Standards — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Lat Pulldown (Strict) — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Towel Pull Up Strength Standards — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
Use Calculator