Cable Hip Thrust Strength Standards
For Cable Hip Thrust, Novice starts at 0.65x bodyweight for men and 0.50x for women, while Elite starts at 1.7x bodyweight for men and 1.4x for women.
Only valid Cable Hip Thrust reps count: thrust from the same hip-flexed start to a controlled full hip-extension finish without changing bench height, attachment position, range, or trunk control. Invalid reps include Barbell Hip Thrust, Hip Thrust Machine, Cable Pull Through, Cable Glute Bridge when floor-based is the tested standard, Barbell Glute Bridge.
Run the calculator to see how your estimated 1RM ranks against the standards, whether the result is already good for your bodyweight, and which benchmark comes next.
Understanding Your Cable Hip Thrust Strength Score
Your Cable Hip Thrust strength score is estimated 1RM divided by bodyweight. The calculator uses the selected cable resistance applied to the hips for the bench-supported hip-thrust setup, valid Cable Hip Thrust reps, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.
This result is specific to Cable Hip Thrust. A counted rep should meet this standard: thrust from the same hip-flexed start to a controlled full hip-extension finish without changing bench height, attachment position, range, or trunk control. The score is not a general label for every nearby hinge exercise, and it should not be used for Barbell Hip Thrust, Hip Thrust Machine, Cable Pull Through, Cable Glute Bridge when floor-based is the tested standard, Barbell Glute Bridge, partial lockouts, bounced reps, bench setup changes, Any variation where bodyweight-only ability, per-side weight, cable-stack weight, machine weight, implement weight, or combined weight is entered under the wrong convention. Those variations may be useful training choices, but they answer a different standards question.
For example, a 200 lb male with a 260 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 210 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.
The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.
Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same setup rule, same range, same support position, and same rep quality were used again.
Cable Hip Thrust Strength Standards
Cable Hip Thrust standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.
The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the selected cable resistance applied to the hips for the bench-supported hip-thrust setup, valid reps, and no substitutions from related lifts.
Men’s Cable Hip Thrust Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 120 lb | 78 lb | 114 lb | 156 lb | 204 lb+ | 246 lb |
| 130 lb | 85 lb | 124 lb | 169 lb | 221 lb+ | 267 lb |
| 140 lb | 91 lb | 133 lb | 182 lb | 238 lb+ | 287 lb |
| 150 lb | 98 lb | 143 lb | 195 lb | 255 lb+ | 308 lb |
| 160 lb | 104 lb | 152 lb | 208 lb | 272 lb+ | 328 lb |
| 170 lb | 111 lb | 162 lb | 221 lb | 289 lb+ | 348 lb |
| 180 lb | 117 lb | 171 lb | 234 lb | 306 lb+ | 369 lb |
| 190 lb | 124 lb | 181 lb | 247 lb | 323 lb+ | 389 lb |
| 200 lb | 130 lb | 190 lb | 260 lb | 340 lb+ | 410 lb |
| 210 lb | 137 lb | 200 lb | 273 lb | 357 lb+ | 430 lb |
| 220 lb | 143 lb | 209 lb | 286 lb | 374 lb+ | 451 lb |
| 230 lb | 150 lb | 219 lb | 299 lb | 391 lb+ | 471 lb |
| 240 lb | 156 lb | 228 lb | 312 lb | 408 lb+ | 492 lb |
| 250 lb | 163 lb | 238 lb | 325 lb | 425 lb+ | 513 lb |
| 260 lb | 169 lb | 247 lb | 338 lb | 442 lb+ | 533 lb |
Women’s Cable Hip Thrust Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 100 lb | 50 lb | 75 lb | 105 lb | 140 lb+ | 170 lb |
| 110 lb | 55 lb | 83 lb | 116 lb | 154 lb+ | 187 lb |
| 120 lb | 60 lb | 90 lb | 126 lb | 168 lb+ | 204 lb |
| 130 lb | 65 lb | 98 lb | 137 lb | 182 lb+ | 221 lb |
| 140 lb | 70 lb | 105 lb | 147 lb | 196 lb+ | 238 lb |
| 150 lb | 75 lb | 113 lb | 158 lb | 210 lb+ | 255 lb |
| 160 lb | 80 lb | 120 lb | 168 lb | 224 lb+ | 272 lb |
| 170 lb | 85 lb | 128 lb | 179 lb | 238 lb+ | 289 lb |
| 180 lb | 90 lb | 135 lb | 189 lb | 252 lb+ | 306 lb |
| 190 lb | 95 lb | 143 lb | 200 lb | 266 lb+ | 323 lb |
| 200 lb | 100 lb | 150 lb | 210 lb | 280 lb+ | 340 lb |
| 210 lb | 105 lb | 158 lb | 221 lb | 294 lb+ | 357 lb |
| 220 lb | 110 lb | 165 lb | 231 lb | 308 lb+ | 374 lb |
Men: Beginner is below 0.650x, Novice begins at 0.650x, Intermediate begins at 0.950x, Advanced begins at 1.300x, Elite begins at 1.700x, and Stretch is 2.050x bodyweight. Women: Beginner is below 0.500x, Novice begins at 0.500x, Intermediate begins at 0.750x, Advanced begins at 1.050x, Elite begins at 1.400x, and Stretch is 1.700x bodyweight.
At 200 lb bodyweight, a male lifter needs about 260 lb for Advanced and 340 lb for Elite. At 150 lb bodyweight, a female lifter needs about 158 lb for Advanced and 210 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.
How the Cable Hip Thrust Calculator Works
The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.
Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 260 lb estimated 1RM, the ratio is near 1.300x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.
Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the selected cable resistance applied to the hips for the bench-supported hip-thrust setup and valid Cable Hip Thrust reps that meet the accepted rule.
Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.
The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Cable Hip Thrust question described here, using the same bodyweight-ratio logic as the rest of the standards system.
Elite Cable Hip Thrust Strength Levels
Elite Cable Hip Thrust strength starts at 1.700x bodyweight for men and 1.400x bodyweight for women. Stretch benchmarks are 2.050x for men and 1.700x for women, marking unusually strong results inside this standards system.
At 200 lb bodyweight, Elite begins around 340 lb for men. At 150 lb bodyweight, Elite begins around 210 lb for women. Those numbers are impressive only when the entry still reflects the selected cable resistance applied to the hips for the bench-supported hip-thrust setup, valid Cable Hip Thrust reps, and the accepted rep.
Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Cable Hip Thrust.
Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.
Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.
Cable Hip Thrust Strength Compared to Other Lifts
Comparisons are useful because they explain why standards differ. Cable Hip Thrust sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator.
| Related movement | Comparison purpose | What the gap can reveal |
|---|---|---|
| Barbell Hip Thrust | closest neighboring standard | A higher Cable Hip Thrust score can show skill in this exact setup, while a lower score points to the constraint this calculator isolates. |
| Hip Thrust Machine | same family contrast | If the related lift is far ahead, the limiting factor is often range, bracing, grip, or strict finish quality here. |
| Cable Pull Through | equipment contrast | If this score is far ahead, confirm the set did not drift into a disallowed variation. |
| Glute Bridge | range and control comparison | The comparison is useful because the bodyweight-ratio math is shared while the accepted rep is different. |
| Barbell Glute Bridge | heavier strength ceiling | A similar tier can suggest balanced development, but it still does not make the two entries interchangeable. |
| Plate weighted Hip Thrust | technique transfer check | Use the gap to choose training work instead of forcing one result to predict the other. |
If a related lift is much stronger, look for the one constraint unique to Cable Hip Thrust: range, support position, grip, bracing, or finish control. If Cable Hip Thrust is much stronger, confirm that the set did not become one of the disallowed variations.
Also separate implement families before drawing conclusions. A barbell version may reward a straighter path and heavier total weight, a dumbbell version may make grip and wrist position the limiter, a cable or machine version may remove some bracing demand, and a squat, press, row, curl, or extension pattern belongs in a different standards family entirely.
The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.
Milestones in Cable Hip Thrust Strength
Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.
| Milestone | Example target | Why it matters | Next focus |
|---|---|---|---|
| First valid strict cable hip thrust rep | 3 to 5 clean reps at a repeatable training weight | Shows the lifter can follow the accepted rule before a max test | Keep setup identical across sets |
| Novice boundary | Men near 130 lb; women near 75 lb | Creates a first bodyweight-ratio benchmark | Build range and control |
| Intermediate boundary | Men near 190 lb; women near 113 lb | Shows the lift is no longer just familiar | Address the main limiter |
| Advanced boundary | Men near 260 lb; women near 158 lb | Marks strong relative performance for this exercise | Use smaller jumps and more video review |
| Elite boundary | Men near 340 lb; women near 210 lb | Shows high-level strength in the exact standard | Protect strict rep quality |
| Stretch benchmark | Men near 410 lb; women near 255 lb | Represents an unusually strong score in this calculator | Retest sparingly and recover well |
| Five-rep practice target | Use a set that estimates near 190 lb for a 200 lb male or 113 lb for a 150 lb female | Builds a cleaner estimate before a heavier test | Keep every rep visually identical |
| Ten percent improvement target | Move a 190 lb estimate toward 209 lb, or a 113 lb estimate toward 124 lb | Gives a concrete block goal without requiring a new tier | Retest only when the same rule survives |
Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Cable Hip Thrust milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.
Related Strength Standards Tools
Related tools place Cable Hip Thrust inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.
- Barbell Hip Thrust is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Cable Hip Thrust. Compare it after a clean Cable Hip Thrust test to see whether this exact setup is the limiter.
- Hip Thrust Machine gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
- Cable Pull Through is useful when the current score feels surprising. Check it only after the Cable Hip Thrust reps are valid, then use the difference to choose assistance work.
- Glute Bridge can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
- Barbell Glute Bridge helps frame broader strength without replacing the Cable Hip Thrust standard. If it is far ahead, audit the exact range and finish required here.
- Plate weighted Hip Thrust offers a technique-transfer check. Similar tiers suggest balanced development, while different tiers can reveal where the path, support, or rep count breaks down.
- Cable Glute Bridge belongs in the comparison set because the name may sound close while the accepted rep is not identical. Use the tool as context, not as a replacement entry.
- Romanian Deadlift gives another bodyweight-ratio lens for the same training neighborhood. The most useful note is why the gap exists: range, depth, path, bracing, or control.
Use these tools after you have a valid Cable Hip Thrust result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.
FAQ
What is a good Cable Hip Thrust score?
A good score depends on sex, bodyweight, and valid rep quality. Intermediate means the lifter has moved past basic familiarity with the tested movement. Advanced means the result is strong for bodyweight. Elite means the lifter is showing high relative strength in this exact pattern. Use the exact calculator result rather than one absolute weight.
What should I enter in the calculator?
Enter sex, bodyweight, the counted reps from the valid set, and the working weight defined by this tool’s setup. Keep bodyweight and working weight in the same unit family. Do not enter a number from another exercise, a partial-range set that hides invalid reps, or a plate-only note unless this exact tool defines that entry. The entry should match a valid set, because the tier threshold is only meaningful when the rep rule matches the calculator.
Can I enter a related exercise if it feels close?
No. Related lifts are useful for context and comparison, but they are not entries for this calculator. Barbell Hip Thrust, Hip Thrust Machine, Cable Pull Through, Cable Glute Bridge when floor-based is the tested standard, Barbell Glute Bridge, partial lockouts, bounced reps, bench setup changes, Any variation where bodyweight-only ability, per-side weight, cable-stack weight, machine weight, implement weight, or combined weight is entered under the wrong convention change the strength demand enough to distort the ratio. Use the matching calculator for the movement you actually performed, then compare tiers only after both results use valid reps.
Do multi-rep sets work for this standard?
Yes, as long as every counted rep follows the same rule. The calculator estimates 1RM from the entered reps, then divides by bodyweight. Lower-rep sets usually give a cleaner estimate than long sets where range, path, or control changes under fatigue.
Should I use pounds or kilograms?
Either unit works. Enter bodyweight and working weight in the same unit family shown by the calculator. The tier is based on a ratio, so a correct kilogram entry and a correct pound entry produce the same classification.
Why is my Cable Hip Thrust lower than a related lift?
That is often normal. This calculator includes constraints that nearby lifts may not share, such as range, support, path, grip, depth, or finish control. A lower ratio can reveal the exact quality the accepted rep is meant to train. Compare the gap with the standards table before changing the exercise, because the difference may be a valid weakness rather than a bad score.
When should I reject a result?
Reject the result when the setup changes, assistance appears, range shortens, control disappears, or the rep becomes Barbell Hip Thrust, Hip Thrust Machine, Cable Pull Through, Cable Glute Bridge when floor-based is the tested standard, Barbell Glute Bridge, partial lockouts, bounced reps, bench setup changes, Any variation where bodyweight-only ability, per-side weight, cable-stack weight, machine weight, implement weight, or combined weight is entered under the wrong convention. The calculator is most useful when it reflects the strict version of the exercise, not the heaviest neighboring movement.
How often should I retest?
Retest every four to eight weeks for most training blocks, or after a clear technical improvement. Testing too often can reward short-term risk more than durable strength. Use practice sets between tests to make the accepted rep more automatic.