Barbell Hip Thrust Hold Strength Standards
Barbell Hip Thrust Hold standards compare a normalized weighted-hold score with Endura-reviewed thresholds for this exact isometric hold, where Novice starts at 0.3x bodyweight for men and 0.24x bodyweight for women and Elite starts at 1.2x bodyweight for men and 0.96x bodyweight for women.
The score uses external added load divided by bodyweight, then adjusts the result to the 60-second reference hold. That means load and hold time both matter: a same-load longer hold scores higher, a same-duration heavier load scores higher, and a short heavy attempt is discounted before the standards result is selected.
Use the calculator result to read your current score, standards range, and next target load at your entered hold duration. Enter only valid externally loaded timed holds for this approved exercise; unloaded holds, adjacent movement substitutions, summed-side totals, and dynamic strength estimates are outside this calculator.
Understanding Your Barbell Hip Thrust Hold Score
The Barbell Hip Thrust Hold calculator compares your normalized weighted-hold score with Endura-reviewed standards for this exact hold. The score starts with added load divided by bodyweight, then adjusts that result to a 60-second reference hold. That gives the calculator one clear axis: equivalent added-load/bodyweight ratio at the reference hold duration.
This matters because Barbell Hip Thrust Hold is not just a loading test and not just a timer test. The scoring method balances load and hold time so a very light long hold and a very heavy short hold are not automatically treated as equal. A user who holds 135 pounds for 60 seconds at 180 pounds bodyweight scores 0.75x bodyweight at the reference duration. A user who holds 209 pounds for 30 seconds gets credit for the heavier load, but the shorter hold is discounted. A user who holds 76 pounds for 120 seconds earns duration credit, but the curve is capped so extended low-load holds do not take over the standards table.
The output is a normalized weighted-hold performance score. It is not a lab force test or population-norm claim. It is a practical standard for strict barbell hip thrust top-position hold with the upper back supported on a bench, feet planted, barbell controlled across the hips, and the hip-extension lockout held for time where the load, bodyweight, and seconds are entered by the user and compared through one normalized score.
The clearest way to use the score is to treat it as a retesting language. If your setup is consistent, the number lets you compare one attempt with another even when the load and seconds are not identical. That is especially helpful for weighted holds because real training attempts rarely land on the same load and the same finish time every session. A normalized score keeps the conversation centered on the quality of the whole performance instead of making the result depend on whichever single field looks most impressive.
| Input | How the calculator uses it | Why it matters |
|---|---|---|
| Bodyweight | Used as the denominator for added-load/bodyweight ratio | Keeps the score relative across lifter sizes |
| Barbell load | Converted to the same unit as bodyweight, then divided by bodyweight | Defines the weighted part of the hold |
| Seconds | Compared with the 60-second reference hold | Rewards controlled duration without letting endless light holds dominate |
| Sex and age band | Select and adjust the standards thresholds | Keeps the result aligned with the right standards table |
Barbell Hip Thrust Hold Strength Standards
The standards below use normalized score boundaries. Each boundary is lower-inclusive: when your score reaches a tier line, you are in that tier. The main tables show example added loads at the 60-second reference hold across broad 10 lb bodyweight increments, so the table gives useful lookup depth without pretending this is a dynamic load result. If your hold time is not 60 seconds, the calculator first adjusts your result to the reference duration before looking up the tier.
These are Endura-reviewed thresholds for Barbell Hip Thrust Hold. They should be read as a consistent standard for this tool, not as known public population norms. The purpose is to make one strict weighted hold comparable across different load and time combinations while keeping the result tied to the same position, load convention, side rule, and stop rule.
The v1 thresholds sit above floor bridge and wall-sit style holds because the barbell hip thrust top position can support meaningful load, but below dynamic hip thrust ratios because the standard is a strict timed lockout hold with no e1RM estimate. 60 seconds is long enough to reward stable top-position hip-extension control and short enough to prevent tiny-load extended holds from dominating
| Bodyweight | Novice 0.3x | Intermediate 0.6x | Advanced 0.9x | Elite 1.2x | Stretch 1.5x |
|---|---|---|---|---|---|
| 120 lb | 36 lb | 72 lb | 108 lb | 144 lb+ | 180 lb |
| 130 lb | 39 lb | 78 lb | 117 lb | 156 lb+ | 195 lb |
| 140 lb | 42 lb | 84 lb | 126 lb | 168 lb+ | 210 lb |
| 150 lb | 45 lb | 90 lb | 135 lb | 180 lb+ | 225 lb |
| 160 lb | 48 lb | 96 lb | 144 lb | 192 lb+ | 240 lb |
| 170 lb | 51 lb | 102 lb | 153 lb | 204 lb+ | 255 lb |
| 180 lb | 54 lb | 108 lb | 162 lb | 216 lb+ | 270 lb |
| 190 lb | 57 lb | 114 lb | 171 lb | 228 lb+ | 285 lb |
| 200 lb | 60 lb | 120 lb | 180 lb | 240 lb+ | 300 lb |
| 210 lb | 63 lb | 126 lb | 189 lb | 252 lb+ | 315 lb |
| 220 lb | 66 lb | 132 lb | 198 lb | 264 lb+ | 330 lb |
| 230 lb | 69 lb | 138 lb | 207 lb | 276 lb+ | 345 lb |
| 240 lb | 72 lb | 144 lb | 216 lb | 288 lb+ | 360 lb |
| 250 lb | 75 lb | 150 lb | 225 lb | 300 lb+ | 375 lb |
| 260 lb | 78 lb | 156 lb | 234 lb | 312 lb+ | 390 lb |
| Bodyweight | Novice 0.24x | Intermediate 0.48x | Advanced 0.72x | Elite 0.96x | Stretch 1.2x |
|---|---|---|---|---|---|
| 100 lb | 24 lb | 48 lb | 72 lb | 96 lb+ | 120 lb |
| 110 lb | 26.5 lb | 53 lb | 79 lb | 105.5 lb+ | 132 lb |
| 120 lb | 29 lb | 57.5 lb | 86.5 lb | 115 lb+ | 144 lb |
| 130 lb | 31 lb | 62.5 lb | 93.5 lb | 125 lb+ | 156 lb |
| 140 lb | 33.5 lb | 67 lb | 101 lb | 134.5 lb+ | 168 lb |
| 150 lb | 36 lb | 72 lb | 108 lb | 144 lb+ | 180 lb |
| 160 lb | 38.5 lb | 77 lb | 115 lb | 153.5 lb+ | 192 lb |
| 170 lb | 41 lb | 81.5 lb | 122.5 lb | 163 lb+ | 204 lb |
| 180 lb | 43 lb | 86.5 lb | 129.5 lb | 173 lb+ | 216 lb |
| 190 lb | 45.5 lb | 91 lb | 137 lb | 182.5 lb+ | 228 lb |
| 200 lb | 48 lb | 96 lb | 144 lb | 192 lb+ | 240 lb |
| 210 lb | 50.5 lb | 101 lb | 151 lb | 201.5 lb+ | 252 lb |
| 220 lb | 53 lb | 105.5 lb | 158.5 lb | 211 lb+ | 264 lb |
For men, Beginner is below 0.3x, Novice begins at 0.3x, Intermediate begins at 0.6x, Advanced begins at 0.9x, Elite begins at 1.2x, and the stretch benchmark is 1.5x bodyweight. For women, Beginner is below 0.24x, Novice begins at 0.24x, Intermediate begins at 0.48x, Advanced begins at 0.72x, Elite begins at 0.96x, and the stretch benchmark is 1.2x bodyweight.
The table values are added-load examples for a clean 60-second hold. If a 180 lb male holds 216 lb for 60 seconds, the normalized score is 1.2x and Elite begins. If he holds the same load for less time, the score may fall below Elite because the attempt no longer matches the reference duration. If he holds a lower load much longer, duration credit can help, but only inside the cap.
At exact thresholds, the higher tier owns the result. A male score of exactly 0.9x is Advanced, and a female score of exactly 0.96x is Elite. The calculator applies the same lower-inclusive rule after age-band adjustment, so a displayed next target is the first added load that would reach the next boundary at the entered hold duration.
| Tier | Normalized score | Example at 180 lb for 60 sec | Reader note |
|---|---|---|---|
| Beginner | Below 0.3x | Below 54 lb | Strict weighted version completed, below first reviewed line |
| Novice | 0.3x | 54 lb | Low added-load ratio at the reference hold |
| Intermediate | 0.6x | 108 lb | Meaningful added load with controlled duration |
| Advanced | 0.9x | 162 lb | High added-load ratio with strict position |
| Elite | 1.2x | 216 lb+ | Very high weighted-hold score without position breakdown |
| Stretch | 1.5x | 270 lb | Above-Elite target used for next-target behavior |
| Tier | Normalized score | Example at 140 lb for 60 sec | Reader note |
|---|---|---|---|
| Beginner | Below 0.24x | Below 33.5 lb | Strict weighted version completed, below first reviewed line |
| Novice | 0.24x | 33.5 lb | Low added-load ratio at the reference hold |
| Intermediate | 0.48x | 67 lb | Meaningful added load with controlled duration |
| Advanced | 0.72x | 101 lb | High added-load ratio with strict position |
| Elite | 0.96x | 134.5 lb+ | Very high weighted-hold score without position breakdown |
| Stretch | 1.2x | 168 lb | Above-Elite target used for next-target behavior |
Elite Barbell Hip Thrust Hold Strength Levels
An Elite result is not just a heavy load held briefly. The score must stay high after load and hold time are balanced to the reference hold. That is why an Elite Barbell Hip Thrust Hold requires strict setup, a stable load position, and enough time under control to prove the position did not break down. A short attempt that looks impressive in raw load can fall below Elite once normalized, while a controlled hold with slightly less load can qualify if it sustains the position long enough.
The table below gives practical Elite benchmarks. The stretch benchmark is not a separate public tier; it is used by the calculator when someone is already Elite and wants a next target. The table should be read with the same load convention as the calculator: entered load is total barbell load held across the hips, including the bar and plates; it is external added load only and does not include bodyweight
Elite should also be interpreted with strictness. A result only belongs in the upper table if the user kept the approved hold position through the recorded time. If depth, load control, foot position, arm position, or support changed before the finish, the entered seconds should stop at the moment the standard was lost. That keeps the result honest for strong users as well as beginners.
| Sex | Elite score | Stretch score | What the result implies |
|---|---|---|---|
| Male | 1.2x | 1.5x | Very high added-load/bodyweight score at the 60-second reference hold |
| Female | 0.96x | 1.2x | Very high added-load/bodyweight score at the 60-second reference hold |
Barbell Hip Thrust Hold Milestones
Milestones should be read as normalized-score goals, not as raw load goals. A heavier load at the same seconds raises the score. A longer hold at the same load raises the score until the curve cap. The calculator uses your actual entered seconds to show the target added load for the next tier at that same duration, which is more useful than telling every user to chase the same number on the floor.
For repeated testing, keep the setup and load placement the same. The user sets the upper back on a stable bench, plants both feet, controls the barbell across the hips, reaches a clear top hip-thrust lockout, and starts timing once the hold is stable. Timing stops when the hips sag below the approved top position, the pelvis tilts into lumbar-extension compensation, the feet move, the upper back loses support, the bar position changes materially, assistance appears, or the user ends the hold. The score is designed to make load and hold time comparable, but it cannot correct for a completely different movement standard.
Milestones can be approached in either direction. Some users will hold the same added load longer until the score crosses the next line. Others will keep the same duration and add load. Both routes are valid inside the calculator because the normalized weighted-hold score is the shared target. What matters is that the attempt still counts under the same testing rules.
| Milestone | 60-second target | 30-second approximate target | Why the target changes |
|---|---|---|---|
| Reach Novice | 54 lb | 91 lb | The 30-second attempt needs more load because the shorter hold is discounted |
| Reach Intermediate | 108 lb | 181.5 lb | The normalized score must still equal 0.6x at the reference hold |
| Reach Advanced | 162 lb | 272.5 lb | Shorter duration requires much higher added load |
| Reach Elite | 216 lb | 363.5 lb | Only strict position and secure loading should be counted |
| Milestone | 60-second target | 30-second approximate target | Why the target changes |
|---|---|---|---|
| Reach Novice | 33.5 lb | 56.5 lb | The 30-second attempt needs more load because the shorter hold is discounted |
| Reach Intermediate | 67 lb | 113 lb | The normalized score must still equal 0.48x at the reference hold |
| Reach Advanced | 101 lb | 169.5 lb | Shorter duration requires much higher added load |
| Reach Elite | 134.5 lb | 226 lb | Only strict position and secure loading should be counted |
Load and Hold Time Examples
These examples show why the calculator uses a normalized weighted-hold score instead of raw load alone or raw seconds alone. Same load with a longer hold produces a higher score. Same seconds with heavier load produces a higher score. Different load and duration pairs can land near each other when the curve balances the two inputs.
| Added load | Hold time | Raw added-load/bodyweight | Normalized score | Interpretation |
|---|---|---|---|---|
| 135 lb | 60 sec | 0.75x | 0.75x | At the reference hold, raw ratio and score match |
| 209 lb | 30 sec | 1.161x | about 0.69x | Heavier load is discounted because the hold is short |
| 76 lb | 120 sec | 0.422x | about 0.844x | Longer hold earns duration credit, within the cap |
| 140 lb | 60 sec | 0.778x | 0.778x | Heavier load at the same time increases the score |
| 135 lb | 75 sec | 0.75x | about 0.938x | Same load held longer increases the score |
| Hold time | Duration effect | Normalized score | What changes |
|---|---|---|---|
| 30 sec | 0.595x reference credit | about 0.446x | Short hold discounts the same added load |
| 45 sec | 0.806x reference credit | about 0.604x | Still below the reference hold |
| 60 sec | 1.000x reference credit | 0.75x | Raw ratio and normalized score match |
| 90 sec | 1.5x reference credit | about 1.125x | Longer hold earns more score for the same load |
| 120 sec | 2x reference cap | 1.5x | Duration credit reaches the approved cap |
A useful way to read the examples is to ask what changed. If the load increases while seconds stay the same, the normalized score rises. If seconds increase while load stays the same, the normalized score rises until the cap. If load increases but duration drops sharply, the two effects compete. That is the point of the score: it gives the result one comparable number while still respecting the reality that both load and position endurance matter.
The examples also show why a result can feel surprising at first. A lighter hold may score higher than a heavier hold when the lighter attempt lasts much longer with clean position. A heavier hold may score higher than a longer hold when the extra load is large enough to outweigh the duration difference. The calculator does the math consistently so the user can focus on entering a strict, repeatable attempt.
How the Barbell Hip Thrust Hold Calculator Works
The calculator collects sex, age band, bodyweight, bodyweight unit, added load, load unit, exercise, and seconds. It converts added load and bodyweight into the same unit, divides added load by bodyweight, applies the duration curve, and then compares the normalized score with the standards table. The result shows your tier, the current score, the score range, and the next target.
The next target is calculated at your entered hold duration. If you held the Barbell Hip Thrust Hold for 45 seconds, the next target load is the added load that would produce the next tier score at 45 seconds. If you held it for 90 seconds, the target uses the 90-second duration multiplier. That keeps the recommendation connected to your current test style instead of forcing every user into a single duration immediately.
Age band affects the threshold lines, not the raw calculation of the hold itself. The added-load/bodyweight ratio and duration multiplier are calculated from the attempt first. Then the calculator compares that score with the selected standards for the user’s sex and age band. This separation keeps the performance math understandable and keeps the result aligned with the right threshold table.
| Step | Calculator action | Visible result |
|---|---|---|
| 1 | Validate sex, age, bodyweight, added load, load units, and seconds | Missing or invalid fields are rejected |
| 2 | Convert bodyweight and added load to the same unit | Pounds and kilograms can be compared fairly |
| 3 | Compute added load divided by bodyweight | Raw load ratio is known |
| 4 | Apply the 60-second reference hold curve | Normalized weighted-hold score is created |
| 5 | Apply sex and age-band thresholds | Tier and current range are selected |
| 6 | Calculate next target at the entered duration | Target added load is shown in the selected unit |
Testing Rules
A valid attempt starts only after the user is stable in the approved Barbell Hip Thrust Hold position. The user sets the upper back on a stable bench, plants both feet, controls the barbell across the hips, reaches a clear top hip-thrust lockout, and starts timing once the hold is stable. The load, stance, contact points, side order, and stop rule should stay consistent across retests. If the tool requires both sides, use the weaker-side valid hold time rather than adding two sides together.
What counts is a controlled weighted hold in the same position the calculator is built around. Hips remain fully extended, ribs and pelvis stay controlled, feet remain planted, upper back stays on the bench, and the bar stays controlled across the hips without bouncing, rolling, or hand-assisted lifting. What does not count is an unloaded hold entered as a weighted attempt, a dynamic lifting set, a supported shortcut, or a nearby movement that happens to involve similar muscles. The goal is not to police every training variation; it is to keep the standards result tied to one repeatable test.
If an attempt becomes questionable, choose the conservative recorded time. Timing stops when the hips sag below the approved top position, the pelvis tilts into lumbar-extension compensation, the feet move, the upper back loses support, the bar position changes materially, assistance appears, or the user ends the hold. The calculator can balance load and hold time, but it cannot know whether the final seconds matched the same position. Honest stop rules are what make the score useful over time.
| Scenario | Counts? | Reason |
|---|---|---|
| Stable approved position, declared external load, and clean timing | Yes | This matches the strict weighted hold |
| two-side barbell hold; no side selector or summed-side behavior applies | Yes | The score follows the approved side-handling rule |
| Hands, rack, wall, partner, or equipment support changes the demand | No | External support changes the weighted hold |
| dynamic attempt sets, partial lockout holds, floor glute bridge holds, machine or Smith substitutions, band-only resistance, hand-assisted hip support, unloaded holds, and any bodyweight-inclusive load entry do not count | No | The attempt no longer matches this calculator |
| Depth, load position, body position, or stop rule changes before the entered seconds | No | Timing should stop when the standard is lost |
Related Tools
Related tools are useful context, but they are not interchangeable with Barbell Hip Thrust Hold. Each tool below shares some overlap in muscles, bracing, loaded endurance, bodyweight-relative strength, or movement family, yet each differs in what the calculator actually scores.
Barbell Hip Thrust Standards
Barbell Hip Thrust is useful movement context for readers comparing nearby strength qualities. It differs from Barbell Hip Thrust Hold because this tool uses external load and hold time normalized to the 60-second reference hold. Use it when you want nearby context, then return to this calculator for the exact weighted-hold score, standards result, and next target load.
Dumbbell Hip Thrust Standards
Dumbbell Hip Thrust is useful movement context for readers comparing nearby strength qualities. It differs from Barbell Hip Thrust Hold because this tool uses external load and hold time normalized to the 60-second reference hold. Use it when you want nearby context, then return to this calculator for the exact weighted-hold score, standards result, and next target load.
Smith Machine Hip Thrust Standards
Smith Machine Hip Thrust is useful movement context for readers comparing nearby strength qualities. It differs from Barbell Hip Thrust Hold because this tool uses external load and hold time normalized to the 60-second reference hold. Use it when you want nearby context, then return to this calculator for the exact weighted-hold score, standards result, and next target load.
Hip Thrust Machine Standards
Hip Thrust Machine is useful movement context for readers comparing nearby strength qualities. It differs from Barbell Hip Thrust Hold because this tool uses external load and hold time normalized to the 60-second reference hold. Use it when you want nearby context, then return to this calculator for the exact weighted-hold score, standards result, and next target load.
Barbell Glute Bridge Standards
Barbell Glute Bridge is useful movement context for readers comparing nearby strength qualities. It differs from Barbell Hip Thrust Hold because this tool uses external load and hold time normalized to the 60-second reference hold. Use it when you want nearby context, then return to this calculator for the exact weighted-hold score, standards result, and next target load.
Frequently Asked Questions
What is a normalized weighted-hold score?
It is the calculator’s single score for the attempt. It starts with added load divided by bodyweight, then adjusts that ratio to the 60-second reference hold so load and hold time are compared together.
Why does the calculator use a 60-second reference hold?
60 seconds is long enough to reward stable top-position hip-extension control and short enough to prevent tiny-load extended holds from dominating The reference hold also makes the standards table readable while still allowing shorter or longer attempts through the calculator.
Does a heavier load always mean a better result?
Not by itself. Heavier load at the same hold duration improves the score, but a much shorter hold can reduce the normalized result. The calculator balances load and hold time before assigning a tier.
Does a longer hold always mean a better result?
Longer duration at the same load improves the score until the duration cap. The cap prevents extremely long low-load holds from overrunning the standards.
Should bodyweight be added into the load?
No. For this tool, the scored load is external added load divided by bodyweight. Bodyweight is used as the denominator, not added to the numerator.
What load should I enter?
entered load is total barbell load held across the hips, including the bar and plates; it is external added load only and does not include bodyweight Use the same load placement each time you retest so the score reflects a comparable attempt.
What stops the timer?
timing stops when the hips sag below the approved top position, the pelvis tilts into lumbar-extension compensation, the feet move, the upper back loses support, the bar position changes materially, assistance appears, or the user ends the hold Enter the last second that still matched the valid attempt standard.
Can I compare this to nearby strength tools?
You can use related tools as general context, but the Barbell Hip Thrust Hold result is its own weighted-hold score. It should be compared with this exact hold, its load convention, its side-handling rule, and its own Endura-reviewed standards.