Endura

Bench vs Smith Machine Bent Over Row Strength Standards

Compare your bench press and smith machine bent over row against strength standards for your sex and bodyweight. Add a recent 1–12-rep result for each lift to compare estimated one-rep maxes, strength levels, next targets, and priority.

First lift: total barbell weight and 1–12 strict reps. Second lift: weight used and 1–12 strict reps. Pounds or kilograms. For the first exercise, lower the bar under control to the chest, pause without bouncing, and press to full elbow lockout with no spotter assistance. For the second exercise, the lifter must pull the bar toward the specified trunk contact or near-contact point, then lower under control to full arm extension. Each lift is compared with its own standards, so the heavier lift is not automatically the stronger one.

Barbell Bench Press vs Smith Machine Bent Over Row Strength Standards

These bodyweight tables place the bench press and smith machine bent over row targets side by side from Novice through Elite. Use them to compare standards, not to force a particular ratio between the lifts.

Find the closest row in the men’s or women’s table. Every target lists Bench Press / Smith Machine Bent Over Row, pounds first and kilograms second. Enter your own sets above for exact ratings without testing a true one-rep max.

Men’s Bench Press vs Smith Machine Bent Over Row Standards

How to read the table: Find the closest bodyweight, then use the labeled exercise row. Every strength-level entry shows one target with pounds first and kilograms beneath it.

Men’s Bench Press vs Smith Machine Bent Over Row standards
BodyweightExerciseNoviceIntermediateAdvancedElite
120 lb54.4 kgBench Press151 lb68.5 kg188 lb85.3 kg225 lb102.1 kg261 lb118.4 kg
Smith Machine Bent Over Row70 lb31.8 kg101 lb45.8 kg137 lb62.1 kg174 lb78.9 kg
130 lb59 kgBench Press159 lb72.1 kg198 lb89.8 kg237 lb107.5 kg276 lb125.2 kg
Smith Machine Bent Over Row74 lb33.6 kg106 lb48.1 kg144 lb65.3 kg183 lb83 kg
140 lb63.5 kgBench Press167 lb75.7 kg208 lb94.3 kg249 lb112.9 kg290 lb131.5 kg
Smith Machine Bent Over Row78 lb35.4 kg112 lb50.8 kg152 lb68.9 kg193 lb87.5 kg
150 lb68 kgBench Press175 lb79.4 kg218 lb98.9 kg261 lb118.4 kg303 lb137.4 kg
Smith Machine Bent Over Row81 lb36.7 kg117 lb53.1 kg159 lb72.1 kg202 lb91.6 kg
160 lb72.6 kgBench Press183 lb83 kg227 lb103 kg272 lb123.4 kg317 lb143.8 kg
Smith Machine Bent Over Row85 lb38.6 kg122 lb55.3 kg166 lb75.3 kg210 lb95.3 kg
170 lb77.1 kgBench Press190 lb86.2 kg237 lb107.5 kg283 lb128.4 kg330 lb149.7 kg
Smith Machine Bent Over Row88 lb39.9 kg127 lb57.6 kg173 lb78.5 kg219 lb99.3 kg
180 lb81.6 kgBench Press198 lb89.8 kg246 lb111.6 kg294 lb133.4 kg342 lb155.1 kg
Smith Machine Bent Over Row92 lb41.7 kg132 lb59.9 kg179 lb81.2 kg228 lb103.4 kg
190 lb86.2 kgBench Press205 lb93 kg255 lb115.7 kg305 lb138.3 kg355 lb161 kg
Smith Machine Bent Over Row95 lb43.1 kg137 lb62.1 kg186 lb84.4 kg236 lb107 kg
200 lb90.7 kgBench Press212 lb96.2 kg264 lb119.7 kg316 lb143.3 kg367 lb166.5 kg
Smith Machine Bent Over Row98 lb44.5 kg142 lb64.4 kg192 lb87.1 kg244 lb110.7 kg
210 lb95.3 kgBench Press219 lb99.3 kg273 lb123.8 kg326 lb147.9 kg379 lb171.9 kg
Smith Machine Bent Over Row102 lb46.3 kg146 lb66.2 kg199 lb90.3 kg252 lb114.3 kg
220 lb99.8 kgBench Press226 lb102.5 kg281 lb127.5 kg336 lb152.4 kg391 lb177.4 kg
Smith Machine Bent Over Row105 lb47.6 kg151 lb68.5 kg205 lb93 kg260 lb117.9 kg
230 lb104.3 kgBench Press233 lb105.7 kg290 lb131.5 kg346 lb156.9 kg403 lb182.8 kg
Smith Machine Bent Over Row108 lb49 kg156 lb70.8 kg211 lb95.7 kg268 lb121.6 kg
240 lb108.9 kgBench Press240 lb108.9 kg298 lb135.2 kg356 lb161.5 kg415 lb188.2 kg
Smith Machine Bent Over Row111 lb50.3 kg160 lb72.6 kg217 lb98.4 kg276 lb125.2 kg
250 lb113.4 kgBench Press246 lb111.6 kg306 lb138.8 kg366 lb166 kg426 lb193.2 kg
Smith Machine Bent Over Row114 lb51.7 kg165 lb74.8 kg223 lb101.2 kg283 lb128.4 kg
260 lb117.9 kgBench Press253 lb114.8 kg314 lb142.4 kg376 lb170.6 kg438 lb198.7 kg
Smith Machine Bent Over Row117 lb53.1 kg169 lb76.7 kg229 lb103.9 kg291 lb132 kg
270 lb122.5 kgBench Press259 lb117.5 kg322 lb146.1 kg386 lb175.1 kg449 lb203.7 kg
Smith Machine Bent Over Row120 lb54.4 kg173 lb78.5 kg235 lb106.6 kg298 lb135.2 kg
280 lb127 kgBench Press265 lb120.2 kg330 lb149.7 kg395 lb179.2 kg460 lb208.7 kg
Smith Machine Bent Over Row123 lb55.8 kg177 lb80.3 kg241 lb109.3 kg306 lb138.8 kg
290 lb131.5 kgBench Press272 lb123.4 kg338 lb153.3 kg404 lb183.3 kg471 lb213.6 kg
Smith Machine Bent Over Row126 lb57.2 kg182 lb82.6 kg247 lb112 kg313 lb142 kg
300 lb136.1 kgBench Press278 lb126.1 kg346 lb156.9 kg414 lb187.8 kg481 lb218.2 kg
Smith Machine Bent Over Row129 lb58.5 kg186 lb84.4 kg252 lb114.3 kg320 lb145.1 kg

Women’s Bench Press vs Smith Machine Bent Over Row Standards

How to read the table: Find the closest bodyweight, then use the labeled exercise row. Every strength-level entry shows one target with pounds first and kilograms beneath it.

Women’s Bench Press vs Smith Machine Bent Over Row standards
BodyweightExerciseNoviceIntermediateAdvancedElite
100 lb45.4 kgBench Press69 lb31.3 kg88 lb39.9 kg114 lb51.7 kg145 lb65.8 kg
Smith Machine Bent Over Row37 lb16.8 kg55 lb24.9 kg78 lb35.4 kg101 lb45.8 kg
110 lb49.9 kgBench Press73 lb33.1 kg94 lb42.6 kg122 lb55.3 kg155 lb70.3 kg
Smith Machine Bent Over Row39 lb17.7 kg59 lb26.8 kg83 lb37.6 kg107 lb48.5 kg
120 lb54.4 kgBench Press78 lb35.4 kg99 lb44.9 kg129 lb58.5 kg164 lb74.4 kg
Smith Machine Bent Over Row41 lb18.6 kg62 lb28.1 kg88 lb39.9 kg114 lb51.7 kg
130 lb59 kgBench Press82 lb37.2 kg105 lb47.6 kg136 lb61.7 kg173 lb78.5 kg
Smith Machine Bent Over Row44 lb20 kg65 lb29.5 kg93 lb42.2 kg120 lb54.4 kg
140 lb63.5 kgBench Press86 lb39 kg110 lb49.9 kg143 lb64.9 kg181 lb82.1 kg
Smith Machine Bent Over Row46 lb20.9 kg69 lb31.3 kg97 lb44 kg126 lb57.2 kg
150 lb68 kgBench Press90 lb40.8 kg115 lb52.2 kg150 lb68 kg190 lb86.2 kg
Smith Machine Bent Over Row48 lb21.8 kg72 lb32.7 kg102 lb46.3 kg132 lb59.9 kg
160 lb72.6 kgBench Press94 lb42.6 kg120 lb54.4 kg157 lb71.2 kg198 lb89.8 kg
Smith Machine Bent Over Row50 lb22.7 kg75 lb34 kg106 lb48.1 kg138 lb62.6 kg
170 lb77.1 kgBench Press98 lb44.5 kg125 lb56.7 kg163 lb73.9 kg207 lb93.9 kg
Smith Machine Bent Over Row52 lb23.6 kg78 lb35.4 kg111 lb50.3 kg143 lb64.9 kg
180 lb81.6 kgBench Press102 lb46.3 kg130 lb59 kg169 lb76.7 kg215 lb97.5 kg
Smith Machine Bent Over Row54 lb24.5 kg81 lb36.7 kg115 lb52.2 kg149 lb67.6 kg
190 lb86.2 kgBench Press105 lb47.6 kg135 lb61.2 kg176 lb79.8 kg222 lb100.7 kg
Smith Machine Bent Over Row56 lb25.4 kg84 lb38.1 kg119 lb54 kg155 lb70.3 kg
200 lb90.7 kgBench Press109 lb49.4 kg139 lb63 kg182 lb82.6 kg230 lb104.3 kg
Smith Machine Bent Over Row58 lb26.3 kg87 lb39.5 kg124 lb56.2 kg160 lb72.6 kg
210 lb95.3 kgBench Press113 lb51.3 kg144 lb65.3 kg188 lb85.3 kg238 lb108 kg
Smith Machine Bent Over Row60 lb27.2 kg90 lb40.8 kg128 lb58.1 kg165 lb74.8 kg
220 lb99.8 kgBench Press116 lb52.6 kg148 lb67.1 kg194 lb88 kg245 lb111.1 kg
Smith Machine Bent Over Row62 lb28.1 kg93 lb42.2 kg132 lb59.9 kg170 lb77.1 kg
230 lb104.3 kgBench Press120 lb54.4 kg153 lb69.4 kg199 lb90.3 kg253 lb114.8 kg
Smith Machine Bent Over Row64 lb29 kg96 lb43.5 kg136 lb61.7 kg176 lb79.8 kg
240 lb108.9 kgBench Press123 lb55.8 kg157 lb71.2 kg205 lb93 kg260 lb117.9 kg
Smith Machine Bent Over Row66 lb29.9 kg98 lb44.5 kg140 lb63.5 kg181 lb82.1 kg

How Your Barbell Bench Press vs Smith Machine Bent Over Row Result Is Calculated

Both lifts are scored independently first: estimated max, bodyweight-adjusted strength level, and progress toward the next level. Those ratings drive the comparison.

1. Estimate a one-rep max from each set

The entered weight is used directly for one rep. With 2–12 reps, both estimates are compared and the lower value is used.

  • Epley: weight × (1 + reps ÷ 30)
  • Brzycki: weight × 36 ÷ (37 − reps)

Use recent Bench Press and Smith Machine Bent Over Row sets with consistent technique and full intended range of motion. Difficult lower-rep sets generally make the estimated max less dependent on extrapolation.

2. Find the bench press strength level

For bench press, the individual exercise thresholds start from reference bodyweights of 190 lb for men and 150 lb for women. Exact-bodyweight targets use reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so heavier lifters are expected to press more total barbell weight without requiring strength to increase pound for pound.

3. Find the smith machine bent over row strength level

The smith machine bent over row rating uses its sex-specific exercise standards. Reference targets at 190 lb for men and 150 lb for women are scaled to the entered bodyweight by reference target × (user bodyweight ÷ reference bodyweight) to the two-thirds power.

The target rises more slowly than bodyweight so larger lifters are expected to lift more without requiring strength to increase pound for pound.

4. Compare the two results

Each max receives a level from Beginner through Elite. The lower-level lift becomes the priority. At matching levels, a priority appears only when one lift is at least 10 points farther from its next level; otherwise the result is Balanced.

A priority result is a standards comparison, not a diagnosis. Differences in technique, fatigue, practice, or set effort may influence it. Age range is recorded anonymously and does not alter these standards.

StageWhat happens
Estimate each maxUse the entered weight for 1 rep; for 2–12 reps, keep the lower formula result.
Rate the bench pressAdjust bench press targets to exact bodyweight with the two-thirds rule.
Rate the smith machine bent over rowUse the exercise-specific estimated max and adjust targets to exact bodyweight with the two-thirds scaling rule.
Compare different levelsName the lower-level lift as the priority.
Compare matching levelsUse Balanced unless the difference in progress toward the next level reaches 10 points.

Enter both sets above to see the estimated maxes, assigned levels, next-level targets, and comparison result.

How Men’s Barbell Bench Press and Smith Machine Bent Over Row Standards Differ

What the men’s data shows:

Novice closest match120 lb

The standards come closest at 120 lb.

Bench Press target is higher4 strength levels

The higher target remains with Bench Press for Novice, Intermediate, Advanced, and Elite throughout the table.

Elite difference87 → 161 lb

39.5 → 73.1 kg from 120 to 300 lb bodyweight.

How to read this chart: Choose a strength level and follow its line across bodyweight. Values show the Smith Machine Bent Over Row standard minus the Bench Press standard: zero means equal, above zero means the Smith Machine Bent Over Row standard is higher, and below zero means the Bench Press standard is higher. Swipe horizontally on mobile. Use the standards table for exact lb/kg targets.

Line chart loading. The standards tables above contain the exact pounds and kilograms.

How Women’s Barbell Bench Press and Smith Machine Bent Over Row Standards Differ

What the women’s data shows:

Novice closest match100 lb

The standards come closest at 100 lb.

Bench Press target is higher4 strength levels

The higher target remains with Bench Press for Novice, Intermediate, Advanced, and Elite throughout the table.

Elite difference44 → 79 lb

Across 100–240 lb bodyweight, the Elite gap changes from 20 to 35.8 kg.

How to read this chart: Choose a strength level and follow its line across bodyweight. Values show the Smith Machine Bent Over Row standard minus the Bench Press standard: zero means equal, above zero means the Smith Machine Bent Over Row standard is higher, and below zero means the Bench Press standard is higher. Swipe horizontally on mobile. Use the standards table for exact lb/kg targets.

Line chart loading. The standards tables above contain the exact pounds and kilograms.

Barbell Bench Press and Smith Machine Bent Over Row Exercises Used by This Calculator

Valid results depend on using the specified bench press and smith machine bent over row technique and load convention. Use strict, repeatable Barbell Bench Press and Smith Machine Bent Over Row tests that follow each exercise’s setup, range of motion, equipment, and load rules. Do not mix variations, assistance, partial range, momentum, or different load conventions.

Use a paused competition-style barbell bench press

Lower the bar under control to the chest, pause without bouncing, and press to full elbow lockout with no spotter assistance. Enter the total barbell weight. Do not enter a touch-and-go, assisted, partial, Smith-machine, dumbbell, incline, decline, equipped, or bench-shirt result.

Use the Smith Machine Bent Over Row setup and load convention

The entered weight for strict Smith Machine Bent Over Row. Valid Smith Machine Bent Over Row reps. The lifter must pull the bar toward the approved trunk contact or near-contact point, then lower under control to full arm extension. A valid finish requires controlled top row position without excessive trunk heave, shrug-only motion, or bar-hook contact. Consistent setup, range, and finish quality across the entered set. No substituted exercise or assisted reps.

Enter one recent Barbell Bench Press result and one recent Smith Machine Bent Over Row result

First lift: total barbell weight and 1–12 strict reps. Second lift: weight used and 1–12 strict reps. Pounds or kilograms.

  • Smith Machine Bent Over Row — View the individual Smith Machine Bent Over Row standards and next strength-level target.
  • Barbell Bent-Over Row — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Yates Bent Over Row — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Smith Machine Romanian Deadlift — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Machine Seated Row — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
  • Low Row — Use this related standards tool to examine a closely related exercise without mixing its result into this comparison.
Use Calculator