Isometric One Kettlebell Floor Press Hold Strength Standards Calculator
Under strict Isometric One Kettlebell Floor Press Hold strength standards, Novice starts around 0.07x bodyweight for men and 0.05x for women, while Elite starts around 0.36x for men and 0.28x for women using the normalized 60-second weighted-hold score.
Enter your sex, bodyweight, age, added load, and hold time to see whether your Isometric One Kettlebell Floor Press Hold is Novice, Intermediate, Advanced, or Elite for your bodyweight and age.
The calculator converts added load and hold time into an equivalent added-load-to-bodyweight ratio at 60 seconds, then compares that score with the Isometric One Kettlebell Floor Press Hold standards for your sex, bodyweight, and age. This keeps the result focused on weighted isometric strength instead of reps, estimated 1RM, or unloaded hold time.
Understanding Your Isometric One Kettlebell Floor Press Hold Score
Your score shows how strong your Isometric One Kettlebell Floor Press Hold was for your bodyweight. It considers both the weight you added and how long you held the position.
A higher score means you held more weight, held the position longer, or did both. For example, adding weight can improve your score even if the hold is shorter, while holding the same weight longer can also improve it.
Your result is classified as Beginner, Novice, Intermediate, Advanced, or Elite. Use that level to understand your current performance, then use the calculator’s next target to plan what to improve.
Only compare attempts performed with the same setup, body position, load placement, side-handling rule, and stop rules. Otherwise, a higher score may reflect an easier setup rather than improved strength.
Isometric One Kettlebell Floor Press Hold Strength Standards
The tables below show the added weight needed to reach each Isometric One Kettlebell Floor Press Hold strength level when the hold lasts 60 seconds.
Find the row closest to your bodyweight, then compare your added weight with the Novice, Intermediate, Advanced, Elite, and Stretch targets. If your hold lasted more or less than 60 seconds, use the calculator because hold time changes the result.
These are Endura’s standards for comparing consistent Isometric One Kettlebell Floor Press Hold attempts. They are not population averages.
How Endura set these standards: We anchored the test at a strict 60-second Isometric One Kettlebell Floor Press Hold, calibrated added-weight-to-bodyweight targets to balance load and hold time, and checked the tiers against the reviewed movement anchors for this exercise. These are Endura benchmarks, not population percentiles.
| Bodyweight | Novice 0.07x | Intermediate 0.14x | Advanced 0.24x | Elite 0.36x | Stretch target 0.46x |
|---|---|---|---|---|---|
| 120 lb | 8.5 lb | 17 lb | 29 lb | 43 lb+ | 55 lb |
| 130 lb | 9 lb | 18 lb | 31 lb | 47 lb+ | 60 lb |
| 140 lb | 10 lb | 19.5 lb | 33.5 lb | 50.5 lb+ | 64.5 lb |
| 150 lb | 10.5 lb | 21 lb | 36 lb | 54 lb+ | 69 lb |
| 160 lb | 11 lb | 22.5 lb | 38.5 lb | 57.5 lb+ | 73.5 lb |
| 170 lb | 12 lb | 24 lb | 41 lb | 61 lb+ | 78 lb |
| 180 lb | 12.5 lb | 25 lb | 43 lb | 65 lb+ | 83 lb |
| 190 lb | 13.5 lb | 26.5 lb | 45.5 lb | 68.5 lb+ | 87.5 lb |
| 200 lb | 14 lb | 28 lb | 48 lb | 72 lb+ | 92 lb |
| 210 lb | 14.5 lb | 29.5 lb | 50.5 lb | 75.5 lb+ | 96.5 lb |
| 220 lb | 15.5 lb | 31 lb | 53 lb | 79 lb+ | 101 lb |
| 230 lb | 16 lb | 32 lb | 55 lb | 83 lb+ | 106 lb |
| 240 lb | 17 lb | 33.5 lb | 57.5 lb | 86.5 lb+ | 110.5 lb |
| 250 lb | 17.5 lb | 35 lb | 60 lb | 90 lb+ | 115 lb |
| 260 lb | 18 lb | 36.5 lb | 62.5 lb | 93.5 lb+ | 119.5 lb |
| Bodyweight | Novice 0.05x | Intermediate 0.105x | Advanced 0.18x | Elite 0.28x | Stretch target 0.36x |
|---|---|---|---|---|---|
| 100 lb | 5 lb | 10.5 lb | 18 lb | 28 lb+ | 36 lb |
| 110 lb | 5.5 lb | 11.5 lb | 20 lb | 31 lb+ | 39.5 lb |
| 120 lb | 6 lb | 12.5 lb | 21.5 lb | 33.5 lb+ | 43 lb |
| 130 lb | 6.5 lb | 13.5 lb | 23.5 lb | 36.5 lb+ | 47 lb |
| 140 lb | 7 lb | 14.5 lb | 25 lb | 39 lb+ | 50.5 lb |
| 150 lb | 7.5 lb | 16 lb | 27 lb | 42 lb+ | 54 lb |
| 160 lb | 8 lb | 17 lb | 29 lb | 45 lb+ | 57.5 lb |
| 170 lb | 8.5 lb | 18 lb | 30.5 lb | 47.5 lb+ | 61 lb |
| 180 lb | 9 lb | 19 lb | 32.5 lb | 50.5 lb+ | 65 lb |
| 190 lb | 9.5 lb | 20 lb | 34 lb | 53 lb+ | 68.5 lb |
| 200 lb | 10 lb | 21 lb | 36 lb | 56 lb+ | 72 lb |
| 210 lb | 10.5 lb | 22 lb | 38 lb | 59 lb+ | 75.5 lb |
| 220 lb | 11 lb | 23 lb | 39.5 lb | 61.5 lb+ | 79 lb |
How the Isometric One Kettlebell Floor Press Hold Calculator Works
The calculator first compares the weight you added with your bodyweight. It then adjusts the result based on how long you held the Isometric One Kettlebell Floor Press Hold. Pounds and kilograms are converted automatically, so you can use either unit.
For example, a 180 lb person holding 27 lb for 60 seconds scores 0.15x bodyweight. Holding the same weight longer raises the score, while holding it for less time lowers the score. Extra time can improve the score for up to 120 seconds; holding longer than that does not add more credit.
Your age and sex determine which strength standards your score is compared with. They do not change the score produced by the attempt itself.
The calculator also shows how much added weight you would need to reach the next strength level at the same hold time you entered. This gives you a practical target without requiring every test to last exactly 60 seconds.
Isometric One Kettlebell Floor Press Hold Load and Hold-Time Comparisons
Added weight and hold time both affect your Isometric One Kettlebell Floor Press Hold score. These examples show how different attempts compare for a 180-pound person.
| Added weight | Hold time | Added-load ratio | Normalized score |
|---|---|---|---|
| 27 lb | 60 sec | 0.15x | 0.15x |
| 40 lb | 30 sec | 0.222x | 0.132x |
| 15 lb | 120 sec | 0.083x | 0.167x |
A heavier attempt does not necessarily produce a higher score if it is held for much less time. Use the calculator to compare attempts using your own bodyweight and exact hold time.
Isometric One Kettlebell Floor Press Hold Milestones and Next Targets
Isometric One Kettlebell Floor Press Hold progress can come from adding weight, holding the position longer, or improving both. These changes do not affect your score equally. A shorter hold requires more added weight to reach the same strength level, while a longer hold requires less weight because the calculator gives credit for the additional time.
For example, a 180 lb man reaches the Intermediate benchmark with 25 lb for 60 seconds. He would need about 42 lb for a 30-second hold, or 16.5 lb for a 90-second hold, to reach the same level. Use the table for reference, then enter your own bodyweight, sex, age, and hold time into the calculator for your exact next target.
| Example user | Hold time | Novice | Intermediate | Advanced | Elite |
|---|---|---|---|---|---|
| 180 lb man | 30 sec | 21 lb | 42.5 lb | 72.5 lb | 109 lb |
| 180 lb man | 60 sec | 12.5 lb | 25 lb | 43 lb | 65 lb |
| 180 lb man | 90 sec | 8.5 lb | 17 lb | 29 lb | 43 lb |
| 140 lb woman | 30 sec | 12 lb | 24.5 lb | 42.5 lb | 66 lb |
| 140 lb woman | 60 sec | 7 lb | 14.5 lb | 25 lb | 39 lb |
| 140 lb woman | 90 sec | 4.5 lb | 10 lb | 17 lb | 26 lb |
Isometric One Kettlebell Floor Press Hold Testing Rules
User lies on the floor with one kettlebell pressed to the mid-range hold position, roughly halfway between full extension and the floor-press bottom where the upper arm would contact the floor; timing starts once the kettlebell is stable. During the attempt, shoulders and torso remain controlled, the working elbow stays near the approved mid-range angle, the kettlebell remains above the shoulder/chest line, and the upper arm does not rest on the floor.
Timing stops when the kettlebell drifts materially, the elbow locks out, the upper arm/triceps contacts the floor, the user bridges for assistance, the free hand assists, or the user ends the hold. Entered load is the weight of the one kettlebell used by one arm at a time; do not double it, combine both sides, or add bodyweight. Test both arms with the same kettlebell; enter the shorter continuous valid hold time as the score.
| Attempt rule | Counts? |
|---|---|
| Shoulders and torso remain controlled, the working elbow stays near the approved mid-range angle, the kettlebell remains above the shoulder/chest line, and the upper arm does not rest on the floor. | Yes |
| Test both arms with the same kettlebell; enter the shorter continuous valid hold time as the score. | Yes |
| Top lockout holds, bottom floor-rest holds, triceps-on-floor contact, bench press substitutions, two-kettlebell substitutions, bridge-assisted holds, and summed two-arm time do not count. | No |
| The recorded time continues after a stop condition occurs: the kettlebell drifts materially, the elbow locks out, the upper arm/triceps contacts the floor, the user bridges for assistance, the free hand assists, or the user ends the hold | No |
Related Strength Standards Tools
Isometric One Kettlebell Floor Press Hold combines external load with hold time, so the closest comparison is One-Arm Kettlebell Floor Press. Using both calculators can show how a change in position, implement, or scoring method changes the result.
Dumbbell Floor Press and Isometric Bench Press Hold provide the primary nearby comparisons, while Barbell Bench Pin Press and Paused Bench Press broaden the comparison to other strength qualities. Because these tools measure different performances, use them to explore other parts of your strength profile—not as interchangeable Isometric One Kettlebell Floor Press Hold scores.
| Related tool | Why it is related | What that tool measures |
|---|---|---|
| One-Arm Kettlebell Floor Press | Closest dynamic-strength comparison | Estimated maximum strength using a different scoring method |
| Dumbbell Floor Press | Primary dynamic-strength comparison | Estimated maximum strength using a different scoring method |
| Isometric Bench Press Hold | Primary weighted-hold comparison | Added load and hold time combined into a weighted-hold score |
| Barbell Bench Pin Press | Broader loaded-performance comparison | Estimated maximum strength using a different scoring method |
| Paused Bench Press | Broader loaded-performance comparison | Estimated maximum strength using a different scoring method |