Cable Front Raise Strength Standards Calculator
Compare your Cable Front Raise strength with Endura's strength standards for men and women at your bodyweight. A useful benchmark for a good one-rep max is our Intermediate standard: approximately 17 lb at 190 lb for a man and 10 lb at 150 lb for a woman.
How does your best lift compare? Enter your bodyweight, the selected machine resistance setting, and the reps you completed below. The calculator estimates your one-rep max and shows your strength level for your bodyweight. Count total valid repetitions across both arms combined; do not double-count a side.
The calculator compares that estimated one-rep max with the Cable Front Raise standards for your sex at your bodyweight. It preserves the calculator's existing equations, thresholds, and input meanings; the benchmark is a comparison target, not a working-set prescription.
Understanding Your Cable Front Raise Strength Score
Your Cable Front Raise strength score is estimated 1RM divided by bodyweight. The calculator uses the weight from the selected or weighted cable resistance for the one working handle and one arm at a time, total valid reps across both arms combined, and your bodyweight to create a bodyweight-ratio score. That ratio lets two lifters compare the same exercise without pretending that absolute weight alone tells the full story.
This result is specific to Cable Front Raise. A counted rep should raise one cable handle forward to the accepted front-raise height, keep the shoulder and trunk controlled, and lower to the same start without swing or press-out. The score is not a general label for every nearby vertical push exercise, and it should not be used for two-side Cable Front Raise with bar or rope, Dumbbell Front Raise, Barbell Front Raise, Plate Front Raise, Machine Front Raise, Cable Lateral Raise, Dumbbell Lateral Raise, Upright Row, Dumbbell Curl. Those variations may be useful training choices, but they answer a different standards question.
For example, a 200 lb male with a 26 lb estimated 1RM reaches the Advanced boundary for this calculator. A 150 lb female with a 20 lb estimated 1RM reaches the Elite boundary. The same absolute number can land in a different tier when bodyweight changes, which is why the ratio matters.
The most useful reading is practical. Beginner and Novice results usually mean the lifter should make the rep more repeatable before chasing a heavier test. Intermediate results show useful familiarity with the exercise. Advanced and Elite results show strong relative performance only when every counted rep keeps the same range, setup, and finish.
Use the score as a snapshot, then write down the rep details that made the snapshot valid. A later increase means more when the same implement, same side rule, same range, same support position, and same rep quality were used again.
Cable Front Raise Strength Standards
Cable Front Raise standards use sex-specific estimated 1RM-to-bodyweight ratios. The lookup tables below convert those ratios into practical targets at common bodyweights. Use the row nearest your bodyweight for a fast check, then use the calculator result for your exact entry.
The tables are rounded to whole pounds for readability. Tier boundaries resolve upward, so meeting the Intermediate, Advanced, or Elite boundary exactly counts as that higher tier. These standards assume the selected or weighted cable resistance for the one working handle and one arm at a time, valid reps, and no substitutions from related lifts.
Men’s Cable Front Raise Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 120 lb | 6 lb | 10 lb | 16 lb | 23 lb+ | 30 lb |
| 130 lb | 7 lb | 11 lb | 17 lb | 25 lb+ | 33 lb |
| 140 lb | 7 lb | 12 lb | 18 lb | 27 lb+ | 35 lb |
| 150 lb | 8 lb | 13 lb | 20 lb | 29 lb+ | 38 lb |
| 160 lb | 8 lb | 14 lb | 21 lb | 30 lb+ | 40 lb |
| 170 lb | 9 lb | 14 lb | 22 lb | 32 lb+ | 43 lb |
| 180 lb | 9 lb | 15 lb | 23 lb | 34 lb+ | 45 lb |
| 190 lb | 10 lb | 16 lb | 25 lb | 36 lb+ | 48 lb |
| 200 lb | 10 lb | 17 lb | 26 lb | 38 lb+ | 50 lb |
| 210 lb | 11 lb | 18 lb | 27 lb | 40 lb+ | 53 lb |
| 220 lb | 11 lb | 19 lb | 29 lb | 42 lb+ | 55 lb |
| 230 lb | 12 lb | 20 lb | 30 lb | 44 lb+ | 58 lb |
| 240 lb | 12 lb | 20 lb | 31 lb | 46 lb+ | 60 lb |
| 250 lb | 13 lb | 21 lb | 33 lb | 48 lb+ | 63 lb |
| 260 lb | 13 lb | 22 lb | 34 lb | 49 lb+ | 65 lb |
Women’s Cable Front Raise Strength Standards
| Bodyweight | Novice | Intermediate | Advanced | Elite | Stretch |
|---|---|---|---|---|---|
| 100 lb | 4 lb | 6 lb | 9 lb | 13 lb+ | 18 lb |
| 110 lb | 4 lb | 7 lb | 10 lb | 14 lb+ | 20 lb |
| 120 lb | 4 lb | 7 lb | 11 lb | 16 lb+ | 22 lb |
| 130 lb | 5 lb | 8 lb | 12 lb | 17 lb+ | 23 lb |
| 140 lb | 5 lb | 8 lb | 13 lb | 18 lb+ | 25 lb |
| 150 lb | 5 lb | 9 lb | 14 lb | 20 lb+ | 27 lb |
| 160 lb | 6 lb | 10 lb | 14 lb | 21 lb+ | 29 lb |
| 170 lb | 6 lb | 10 lb | 15 lb | 22 lb+ | 31 lb |
| 180 lb | 6 lb | 11 lb | 16 lb | 23 lb+ | 32 lb |
| 190 lb | 7 lb | 11 lb | 17 lb | 25 lb+ | 34 lb |
| 200 lb | 7 lb | 12 lb | 18 lb | 26 lb+ | 36 lb |
| 210 lb | 7 lb | 13 lb | 19 lb | 27 lb+ | 38 lb |
| 220 lb | 8 lb | 13 lb | 20 lb | 29 lb+ | 40 lb |
Men: Beginner is below 0.050x, Novice begins at 0.050x, Intermediate begins at 0.085x, Advanced begins at 0.130x, Elite begins at 0.190x, and Stretch is 0.250x bodyweight. Women: Beginner is below 0.035x, Novice begins at 0.035x, Intermediate begins at 0.060x, Advanced begins at 0.090x, Elite begins at 0.130x, and Stretch is 0.180x bodyweight.
At 200 lb bodyweight, a male lifter needs about 26 lb for Advanced and 38 lb for Elite. At 150 lb bodyweight, a female lifter needs about 14 lb for Advanced and 20 lb for Elite. Treat those as standards for this exact exercise, not as claims about sport ranking or another lift.
How the Cable Front Raise Calculator Works
The calculator takes sex, bodyweight, working weight, and reps. A one-rep entry uses that weight directly as estimated 1RM. A multi-rep entry estimates 1RM from the set first, then divides the estimate by bodyweight and compares the ratio with the selected sex table.
Ratio equals estimated 1RM divided by bodyweight. If a lifter at 200 lb bodyweight records a 26 lb estimated 1RM, the ratio is near 0.130x and reaches Advanced. If bodyweight rises while the estimated 1RM stays the same, the ratio falls and the tier can change.
Use one unit family for bodyweight and working weight. Pounds and kilograms both work because the calculator normalizes the math internally. What matters most is that the entered set uses the selected or weighted cable resistance for the one working handle and one arm at a time and total valid reps across both arms combined that meet the accepted rule.
Multi-rep entries are best when the rep count is challenging but honest. Very high-rep sets can make estimates less precise, especially when fatigue changes range or finish quality. For a standards test, choose a set where the last valid rep still looks like the first valid rep.
The calculator does not add age, sport, equipment-brand, or technique-style multipliers. It answers the specific Cable Front Raise question described here, using the same bodyweight-ratio logic as the rest of the standards system.
Elite Cable Front Raise Strength Levels
Elite Cable Front Raise strength starts at 0.190x bodyweight for men and 0.130x bodyweight for women. Stretch benchmarks are 0.250x for men and 0.180x for women, marking unusually strong results inside this standards system.
At 200 lb bodyweight, Elite begins around 38 lb for men. At 150 lb bodyweight, Elite begins around 20 lb for women. Those numbers are impressive only when the entry still reflects the selected or weighted cable resistance for the one working handle and one arm at a time, total valid reps across both arms combined, and the accepted rep.
Elite lifters should audit reps more strictly, not less. Heavier attempts often tempt shortened range, changed support, body English, or a nearby variation. A bigger number that changes the exercise does not prove a stronger Cable Front Raise.
Video is useful at this tier. Side or three-quarter view can show range, start position, path, and finish quality. Review the footage before entering a max set so the calculator records what actually happened.
Training at this level usually alternates clean heavy singles, moderate technical work, and targeted assistance. The goal is to make the strict rep durable rather than turn every session into a max attempt.
Cable Front Raise Strength Compared to Other Lifts
Comparisons are useful because they explain why standards differ. Cable Front Raise sits near related movements, but the ratios should not be copied because the implement, support, range, path, and finish rule are specific to this calculator. A press, row, raise, squat, curl, extension, or dumbbell benchmark may look close on the training plan while measuring a different joint angle or support problem.
| Related movement | Comparison purpose | What the gap can reveal |
|---|---|---|
| Dumbbell Front Raise | closest neighboring standard | A higher Cable Front Raise score can show skill in this exact stance, shoulder position, and range, while a lower score points to the constraint this calculator isolates. |
| Barbell Front Raise | same family contrast | If the related lift is far ahead, the limiting factor is often depth, trunk brace, grip security, or strict finish quality here. |
| Dumbbell Lateral Raise | equipment and grip contrast | If this score is far ahead, confirm the set did not drift into a disallowed variation with a different path, hip position, or lockout rule. |
| Single Arm Cable Lateral Raise | range, depth, and shoulder-control comparison | The comparison is useful because the bodyweight-ratio math is shared while the accepted rep uses different range, support, and tempo demands. |
| Cable Upright Row | heavier strength ceiling with different stance demands | A similar result can suggest balanced development, but the stance, shoulder angle, grip, and finish still keep the entries separate. |
| Arnold Press | technique transfer check for trunk and hip control | Use the gap to choose training work for the first visible breakdown: depth, path, trunk control, shoulder stability, or weaker-side range. |
If a related lift is much stronger, look for the one constraint unique to Cable Front Raise: range, support position, grip, bracing, or finish control. If Cable Front Raise is much stronger, confirm that the set did not become one of the disallowed variations.
The goal is not to make all badges match. The goal is to identify whether the difference comes from true strength, a technical bottleneck, or a substituted movement that only looks similar on paper.
Milestones in Cable Front Raise Strength
Milestones turn tier ratios into training targets. They are most useful when they are tied to bodyweight and rep quality instead of vague goals such as strong or heavy.
| Milestone | Example target | Why it matters | Next focus |
|---|---|---|---|
| First valid strict cable front raise rep | 3 to 5 clean reps at a repeatable training weight | Shows the lifter can follow the accepted rule before a max test | Keep setup identical across sets |
| Novice boundary | Men near 10 lb; women near 5 lb | Creates a first bodyweight-ratio benchmark | Build range and control |
| Intermediate boundary | Men near 17 lb; women near 9 lb | Shows the lift is no longer just familiar | Address the main limiter |
| Advanced boundary | Men near 26 lb; women near 14 lb | Marks strong relative performance for this exercise | Use smaller jumps and more video review |
| Elite boundary | Men near 38 lb; women near 20 lb | Shows high-level strength in the exact standard | Protect strict rep quality |
| Stretch benchmark | Men near 50 lb; women near 27 lb | Represents an unusually strong score in this calculator | Retest sparingly and recover well |
| Five-rep practice target | Use a set that estimates near 17 lb for a 200 lb male or 9 lb for a 150 lb female | Builds a cleaner estimate before a heavier test | Keep every rep visually identical |
| Ten percent improvement target | Move a 17 lb estimate toward 19 lb, or a 9 lb estimate toward 10 lb | Gives a concrete block goal without requiring a new tier | Retest only when the same rule survives |
Milestones should never override the accepted rep. A lifter who reaches the Advanced number with a substituted movement has not reached the Advanced Cable Front Raise milestone. A lifter who barely misses with excellent reps is often closer to durable progress than the badge alone suggests.
Related Strength Standards Tools
Related tools place Cable Front Raise inside a broader strength map. They help explain why a lifter may be strong in one nearby movement and average in another. They are not substitutions, and their scores should stay separate from the current calculator.
- Dumbbell Front Raise is the closest neighboring benchmark for many lifters, but the accepted range and finishing rule stay separate from Cable Front Raise. Compare it after a clean Cable Front Raise test to see whether this exact setup is the limiter.
- Barbell Front Raise gives a same-family contrast where equipment and support can change the result quickly. A gap often points to grip, range, bracing, or skill rather than one universal strength ceiling.
- Dumbbell Lateral Raise is useful when the current score feels surprising. Check it only after the Cable Front Raise reps are valid, then use the difference to choose assistance work.
- Single Arm Cable Lateral Raise can show whether a heavier-looking movement is actually testing a different constraint. Keep the entries separate so a substituted rep does not inflate this calculator.
- Cable Upright Row helps frame broader strength without replacing the Cable Front Raise standard. If it is far ahead, audit the exact range and finish required here.
- Arnold Press offers a technique-transfer check. Similar tiers suggest balanced development, while different tiers can reveal where the path, support, or rep count breaks down.
- Machine Shoulder Press belongs in the comparison set because the name may sound close while the accepted rep is not identical. Use the tool as context, not as a replacement entry.
- Dumbbell External Rotation gives another bodyweight-ratio lens for the same training neighborhood. The most useful note is why the gap exists: range, depth, path, bracing, or control.
Use these tools after you have a valid Cable Front Raise result. If the comparison changes your interpretation, write down the likely reason: range, grip, path, support, bracing, lockout, depth, or control. That note is often more useful than the badge alone.